TAI-SAW TECHNOLOGY CO., LTD. No. 3, Industrial 2nd Rd., Ping-Chen Industrial District, Taoyuan, 324, Taiwan, R.O.C. TEL: 886-3-4690038 FAX: 886-3-4697532 E-mail: [email protected] Web: www.taisaw.com SAW Filter 2096.66 MHz MODEL NO.:TA0886A REV. NO.:1 A. MAXIMUM RATING: 1. Input Power Level: 10 dBm 2. DC Voltage : 3V 3. Operating Temperature: -40°C to +85°C 4. Storage Temperature: -50°C to +95°C B. ELECTRICAL CHARACTERISTICS: Terminating source impedance (differential) : Terminating load impedance (differential) : Item RoHS Compliant Lead free Lead-free soldering Zs = 150 Ω // 18 nH ZL = 150 Ω // 18 nH Unit MHz Min. - Typ. 2096.66 Max. - Note - MHz 40 65 - - Insertion Loss in 2076.66~2116.66 MHz dB - 2.5 5 - Amplitude ripple (2076.66 MHz ~ 2116.66 MHz) dB - 0.6 2 - Phase error (2076.66 MHz ~ 2116.66 MHz) (3) deg - 3.3 5 - Group Delay ripple(2076.66 MHz ~ 2116.66 MHz) ns - 5 25 - I/O VSWR (2076.66 MHz ~ 2116.66 MHz) - 1.5 2.5 - Center Frequency Fc Bandwidth at –2 dB Attenuation (1) 50 ~ 2016.62 MHz dB 44 49 - - 2176.7 ~ 2200 MHz dB 44 57 - - 2200 ~ 4250 MHz dB 38 44.6 - - 4250 ~ 6000 MHz dB 30 41.6 - - Notes : (1) The amplitude reference is insertion loss at Fc. (2) The amplitude ripple is defined as the max. level – min. level over any 30 MHz block of the given bandwidth. (3) The phase error is measured over any 30 MHz block of the given bandwidth. TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 2 C.OUTLINE DRAWING: G △ B □ T H A, B : Balance Input D, E : Balance Output C,F,G,H : Ground Unit : mm △ : Year Code (2006->6, …, 2009->9) □ : Date Code (Follow the table from planner each year) D. MEASUREMENT CIRCUIT: 18nH 150Ω 150Ω 18nH TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 3 E. PCB Footprint: TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 4 F. Frequency Characteristics : TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 5 TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 6 Reflection Functions : S11 S22 TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 7 G. PACKING: 1. REEL DIMENSION (Reel Count : 7”=1000 ; 13”=3000 ) 2.TAPE DIMENSION BT △ TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 8 360 340 320 300 280 260 240 220 200 180 160 140 120 100 80 60 40 20 280 260 240 220 200 180 160 140 120 100 80 60 40 20 0 Temp ( Deg C) H. RECOMMENDED REFLOW PROFILE : Time (Sec) TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 9