TAI-SAW TECHNOLOGY CO., LTD. No. 3, Industrial 2nd Rd., Ping-Chen Industrial District, Taoyuan, 324, Taiwan, R.O.C. TEL: 886-3-4690038 FAX: 886-3-4697532 E-mail: [email protected] Web: www.taisaw.com SAW Filter 1561 MHz MODEL NO.:TA1520A REV. NO.:1 A. MAXIMUM RATING: 1. Input Power Level: 10 dBm 2. DC Voltage : 3V RoHS Compliant Lead free Lead-free soldering 3. Operating Temperature: -40°C to +85°C 4. Storage Temperature: -50°C to +95°C B. ELECTRICAL CHARACTERISTICS: Terminating source impedance (differential) : Terminating load impedance (differential) : Item Electrostatic Sensitive Device (ESD) Zs = 200 Ω // 20nH ZL = 200 Ω // 20nH Unit MHz Min. - Typ. 1561 Max. - Note - MHz - 59 - - Insertion Loss in 1551~1571 MHz dB - 2.7 4 - Amplitude ripple (1551 MHz ~ 1571 MHz) dB - 0.4 2 - Group delay variation (1551 MHz ~ 1571 MHz) ns - 6 15 - I/O Return Loss (1551 MHz ~ 1571 MHz) dB 8 10 - - Center Frequency Fc Bandwidth at –3 dB Attenuation (reference level from 0 dB) 10 ~ 1465 MHz dB 43 52 - - 1700 ~ 2400 MHz dB 43 57 - - Temperature Coefficient of Frequency ppm/℃ - -36 - - TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 2 C.OUTLINE DRAWING: △ Q □ 8 A, B : Balance Input E, F : Balance Output C,D,G,H : Ground Unit : mm △ : Year Code (2009->9, 2010->0, …, 2018->8) □ : Date Code (Follow the table from planner each year) Date Code Table WK01 WK02 WK03 WK04 WK05 WK06 WK07 WK08 WK09 WK10 WK11 WK12 WK13 A B C D E F G H I J K L M WK14 WK15 WK16 WK17 WK18 WK19 WK20 WK21 WK22 WK23 WK24 WK25 WK26 N O P Q R S T U V W X Y Z WK27 WK28 WK29 WK30 WK31 WK32 WK33 WK34 WK35 WK36 WK37 WK38 WK39 a b c d e f g h i j k l m WK40 WK41 WK42 WK43 WK44 WK45 WK46 WK47 WK48 WK49 WK50 WK51 WK52 n o p q r s t u v TAI-SAW TECHNOLOGY CO., LTD. w x y z TST DCC Release document 3 D. MEASUREMENT CIRCUIT: 20nH 200Ω 200Ω 20nH E. PCB Footprint: TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 4 F. Frequency Characteristics : TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 5 Reflection Functions : S11 S22 TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 6 G. PACKING: 1. REEL DIMENSION (Please refer to FR-75D10 for packing quantity ) 2.TAPE DIMENSION Q8 △ TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 7 H. RECOMMENDED REFLOW PROFILE : 1. 2. 3. 4. Preheating shall be fixed at 150~180℃ for 60~90 seconds. Ascending time to preheating temperature 150℃ shall be 30 seconds min. Heating shall be fixed at 220℃ for 50~80 seconds and at 245~260℃ peak (min. 10sec). Time : 2 times. TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 8