TAI-SAW TECHNOLOGY CO., LTD. No. 3, Industrial 2nd Rd., Ping-Chen Industrial District, Taoyuan, 324, Taiwan, R.O.C. TEL: 886-3-4690038 FAX: 886-3-4697532 E-mail: [email protected] Web: www.taisaw.com SAW Filter 447.4 MHz MODEL NO.:TA1563A REV. NO.: 1.0 A. MAXIMUM RATING: 1. Input Power Level: 10 dBm 2. DC Voltage : 6V 3. Operating Temperature: -40°C to +85°C 4. Storage Temperature: -40°C to +85°C RoHS Compliant Lead free Lead-free soldering Electrostatic Sensitive Device B. ELECTRICAL CHARACTERISTICS: Item Center frequency Fc 3dB BW Minimum insertion loss Incl. loss of matching elements(Q=78) Exclude loss in matching elements Unit Min. Typ. Max. MHz - 447.4 - KHz - 1100 - dB dB - 2.3 2.0 3.3 3.0 dB - 0.4 3.0 dB dB dB 35 20 20 48 27 27 - dB 36 51 - IL(min) *1) *2) Passband (relative to ILmin ) *1) 447.10 ~ 447.70 MHz Attenuation (relative to ILmin ) *1) 10.000 ~ 430.00 442.30 ~ 445.40 449.60 ~ 452.80 465.00 ~ 600.00 MHz MHz MHz MHz Impedance at Fc, Input *1) Zin = Rin//Cin Zs Impedance at Fc, Output *1) Zout = Rout//Cout ZL Ω Ω 225Ω//1.19 pF 222Ω//1.26 pF *1)：The matching circuit is real by actual passive components. 0805 Coillcraft CS series chip conductor is used for inductor. 0402 muRata GRM series is used for capacitor. *2)： The matching circuit is ideal by simulation. TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 2 C. Frequency Characteristics : TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 3 Smith Chart_S11： Smith Chart_S22： D. MEASUREMENT CIRCUIT: The matching circuit is real by actual passive components. L1=68nH L2=68n TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 4 E.OUTLINE DRAWING: 1563 △ □ #1：Input ground (recommended) or Input #2：Input (recommended) or Input ground #5：Output ground (recommended) or Output #6:：Output (recommended) or Output ground #3、#7: To be grounded #4、#8：Case Ground Year ∆：Year Code □：Data Code(Follow the table provided by planer each year ) Unit：mm Year Code 2011 ： ： 2012 ： ： 2019 2020 A a WK01 WK02 WK03 WK04 WK05 WK06 WK07 WK08 WK09 WK10 WK11 WK12 WK13 A B C D E F G H I J K L M WK14 WK15 WK16 WK17 WK18 WK19 WK20 WK21 WK22 WK23 WK24 WK25 WK26 N O P Q R S T U V W X Y Z WK27 WK28 WK29 WK30 WK31 WK32 WK33 WK34 WK35 WK36 WK37 WK38 WK39 a b c d e f g h i j k l m WK40 WK41 WK42 WK43 WK44 WK45 WK46 WK47 WK48 WK49 WK50 WK51 WK52 n o p q r s t u v w x y z F. PCB Footprint: TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 5 G. PACKING: 1. REEL DIMENSION (Please refer to FR-75D10 for packing quantity) v 2. TAPE DIMENSION 1563 TST DCC Release document TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 6 360 340 320 300 280 260 240 220 200 180 160 140 120 100 80 60 40 20 280 260 240 220 200 180 160 140 120 100 80 60 40 20 0 Temp ( Deg C) H. RECOMMENDED REFLOW PROFILE: Time (Sec) TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 7