TAI-SAW TECHNOLOGY CO., LTD. No. 3, Industrial 2nd Rd., Ping-Chen Industrial District, Taoyuan, 324, Taiwan, R.O.C. TEL: 886-3-4690038 FAX: 886-3-4697532 E-mail: [email protected] Web: www.taisaw.com Product Specifications Approval Sheet Product Description: 261.12MHz 5MHz BW SMD 13.3×6.5mm SAW Filter TST Part No.: TB0204A Customer Part No.: Customer signature required Company: Division: Approved by : Date: Checked by: Marco Huang Approved by: Bob Chau Date: 09/15/2015 1. Customer signed back is required before TST can proceed with sample build and receive orders. 2. Orders received without customer signed back will be regarded as agreement on the specifications. 3. Any specifications changes must be approved upon by both parties and a new revision of specifications shall be released to reflect the changes. TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document FR-71S03-02 TAI-SAW TECHNOLOGY CO., LTD. No. 3, Industrial 2nd Rd., Ping-Chen Industrial District, Taoyuan, 324, Taiwan, R.O.C. TEL: 886-3-4690038 FAX: 886-3-4697532 E-mail: [email protected] Web: www.taisaw.com IF SAW Filter 261.12MHz(BW=5MHz) SMD 13.3X6.5mm MODEL NO.: TB0204A REV.3.0 A. MAXIMUM RATING: 1. Operating Temperature: -30 C ~ +85 C 2. Storage Temperature: -40 C ~ +85 C 3. Input power: 10dBm RoHS Compliant Lead free Lead-free soldering Electrostatic Sensitive Device B. ELECTRICAL CHARACTERISTICE: Ambient Temperature: 25 C Characteristics Value Typ. Min. Center frequency FC Minimum Insertion loss I.L. Lower 1 dB Bandedge MHz dB MHz - Upper 1 dB Bandedge Lower 15 dB Bandedge MHz MHz Upper 15 dB Bandedge MHz Max. - Note - 261.12 11.5 - 12 - 258.6 259.2 263.04 263.5 - - 257.12 257.7 - - 264.5 265.12 Phase Linearity (259.2~263.04MHz)(rms) deg Attenuation: (Reference level from minimum insertion loss) 1) 161.12 MHz~241.12 MHz dB 43 1.8 4 48 - 2) 241.12 MHz~253.12 MHz 3) 269.12 MHz~281.12 MHz dB dB 43 47 - 43 47 - 4) 281.12 MHz~361.12 MHz Substrate Material dB 43 50 LiTaO3 - dB TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document - - 2 - C. FREQUENCY CHARACTERISTICE: 1. S21 Response: (span : 50MHz) Fig1. Horizontal: 5MHz/Div 2. Group-Delay Ripple: (span : 10MHz) Vertical: 10dB/Div Fig2. Vertical: 200nec/Div Horizontal: 1.0MHz/Div TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document - 3 - 3. S11 Smith Chart: (span : 50MHz) 4. S22 Smith Chart (span : 50MHz) TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document - 4 - D. MATCHING CIRCUIT: L=8.2nH L2=9.4nH C1=36pF C2=31pF E. OUTLINE DRAWING: #K: Input #A: Input Ground #E: Output #F: Output Ground #B,C,D,G,H,J: Ground □: Week Code △: Product / Year Code TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document - 5 - Product Code Table Year 2013 2017 2014 2018 2015 2019 2016 2020 Product Code B b B b Week Code Table WK01 WK02 WK03 WK04 WK05 WK06 WK07 WK08 WK09 WK10 WK11 WK12 WK13 A B C D E F G H I J K L M WK14 WK15 WK16 WK17 WK18 WK19 WK20 WK21 WK22 WK23 WK24 WK25 WK26 N O P Q R S T U V W X Y Z WK27 WK28 WK29 WK30 WK31 WK32 WK33 WK34 WK35 WK36 WK37 WK38 WK39 a b c d e f g h i j k l m WK40 WK41 WK42 WK43 WK44 WK45 WK46 WK47 WK48 WK49 WK50 WK51 WK52 n o p q r s t u v w x y z F. PCB FOOTPRINT: TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document - 6 - G. PACKING: 1. REEL DIMENSION (Please refer to FR-75D10 for packing quantity) 2. TAPE DIMENSION Unit: mm TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document - 7 - H. RECOMMENDED REFLOW PROFILE: 1. Preheating shall be fixed at 150~180℃ for 60~90 seconds. 2. Ascending time to preheating temperature 150℃ shall be 30 seconds min. 3. Heating shall be fixed at 220℃ for 50~80 seconds and at 260℃+0/-5℃ peak (20~40sec). 4. Time: 2 times. TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document - 8 -