TAI-SAW TECHNOLOGY CO., LTD. No. 3, Industrial 2nd Rd., Ping-Chen Industrial District, Taoyuan, 324, Taiwan, R.O.C. TEL: 886-3-4690038 FAX: 886-3-4697532 E-mail: [email protected] Web: www.taisaw.com Approval Sheet For Product Specification Issued Date: Feb, 18, 2004 Product Name: SAW Filter 140 MHz SMD 5.0x7.0 mm TST Parts No.:TB0217A Customer Parts No.: Company: Division: Approved by : Date: Checked by: Bob Chau Approval by: Francis Chen Date: 2, 18, 2004 TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document FR-03S06-02 TAI-SAW TECHNOLOGY CO., LTD. No. 3, Industrial 2nd Rd., Ping-Chen Industrial District, Taoyuan, 324, Taiwan, R.O.C. TEL: 886-3-4690038 FAX: 886-3-4697532 E-mail: [email protected] Web: www.taisaw.com SAW Filter 140MHz MODEL NO.:TB0217A REV. NO.:1 A. MAXIMUM RATING: 1. Input Power Level: 10 dBm 2. DC Voltage : 5V 3. Operating Temperature: -32°C to +71°C 4. Storage Temperature: -40°C to +85°C B. ELECTRICAL CHARACTERISTICS: Item Unit Center frequency, Fc Minimum Insertion Loss, (Fc±20KHz ) IL 3 dB bandwidth, BW-3 Passband Ripple (Fc±20KHz ) 50 dB bandwidth, BW-50 Group delay ripple (Fc±20KHz ), GD MHz Min. - Type. 140 Max. - Note - dB - 3.0 6.0 - KHz 40 100 - 1 dB - 0.1 3.0 - KHz - 390 450 - µs - 1 12 - - - Temperature coefficient of frequency TCf ppm/C^2 -0.032 Note1. Considering -15 KHz frequency shift from –32℃ to +72℃ TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 2 C.OUTLINE DRAWING: 217 T B□ Pin configuration #9 Input #4 Output #10 Balance input or input ground #5 Balance output or output ground #1,2,3,6,7,8 To be grounded □ Date code Unit mm D. MEASUREMENT CIRCUIT: 50 Ohm Test circuit ( single-ended / single-ended ) HP Network analyzer IN L1=220nH L1=220 nH 9 50Ω SAW Filter 10 OUT 4 50Ω 5 C1=1.8 pF C1=1.8 pF 1,2,3,6,7,8 E. Frequency Characteristics : TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 3 F. PACKING: 1. REEL DIMENSION TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 4 2.TAPE DIMENSION 2208 17 TB TB TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 5