TAI-SAW TECHNOLOGY CO., LTD. No. 3, Industrial 2nd Rd., Ping-Chen Industrial District, Taoyuan, 324, Taiwan, R.O.C. TEL: 886-3-4690038 FAX: 886-3-4697532 E-mail: [email protected] Web: www.taisaw.com Approval Sheet For Product Specification Issued Date: 2006/03/15 Product Name: 44MHz IF SAW Filter (BW=3.4 MHz) TST Parts No.: TB0363A Customer Parts No.: Company: Division: Approved by : Date: Checked by: Andy Yu Approval by: Francis Chen Date: 2006/03/15 TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document FR-71S03-01 TAI-SAW TECHNOLOGY CO., LTD. No.3, Industrial 2nd Rd., Ping-Chen Industrial District, Taoyuan, Taiwan, R.O.C. TEL: 886-3-4690038 FAX: 886-3-4697532 E-mail: [email protected] Web: www.taisaw.com SAW Filter 44MHz (SMD 13.3×6.5 mm) Model No.: TB0363A Rev. No.:1.0 A. MAXIMUM RATING: 1.Input Power Level: 10 dBm RoHS Compliant Lead free Lead-free soldering 2. Operating Temperature: -40°C to +85°C 3. Storage Temperature: -40°C to +85°C B. Characteristics : Item Unit MHz Min. - Type. 44 Max. - dB - 14.5 16 MHz 3.4 3.7 Pass band Ripple Fc±1.25MHz dB - 0.6 Relative Attenuation Fc±1.85MHz dB 15 17 Relative Attenuation Fc±2MHz dB 17 19 Relative Attenuation Fc±3.5MHz dB 51 58 dB 40 44 dB 38 41 Center frequency, Fc Insertion Loss, IL 3 dB Bandwidth Relative Attenuation 26.5MHz to 40.5MHz Relative Attenuation 47.5MHz to 61.5MHz TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 1.0 2 C. Frequency Characteristics : (1) Frequency Response: (2) Passband response and Group Delay Variation: TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 3 D. Outline Drawing: Pin K=L: RF input Pin E=F: RF output □ : Week Code (Follow the table from planner each year) Unit : mm △ : Product / Year Code Year 2005 2009 2006 2010 2007 2011 2008 2012 Product Code B b B b E. Matching Circuit: L1=220nH, L2=510nH TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 4 F. Packing: (1). REEL DIMENSION: (2). TYPE DIMENSION: TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 5 G. Recommended Reflow Profile: TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 6