TAI-SAW TECHNOLOGY CO., LTD. No. 3, Industrial 2nd Rd., Ping-Chen Industrial District, Taoyuan, 324, Taiwan, R.O.C. TEL: 886-3-4690038 FAX: 886-3-4697532 E-mail: [email protected] Web: www.taisaw.com Product Specifications Approval Sheet Product Description: 138.24 MHz 76MHz BW SMD 7.0 x 5.0 mm SAW IF Filter TST Parts No.: TB0695A Customer Parts No.: Customer signature required Company: Division: Approved by : Date: Checked by: Kazuma Lee Approval by: Bob Chau Date: 08/27/2015 1. Customer signed back is required before TST can proceed with sample build and receive orders. 2. Orders received without customer signed back will be regarded as agreement on the specifications. 3. Any specifications changes must be approved upon by both parties and a new revision of specifications shall be released to reflect the changes. TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document FR-71S03-02 TAI-SAW TECHNOLOGY CO., LTD. No.3, Industrial 2nd Rd., Ping-Chen Industrial District, Taoyuan, Taiwan, R.O.C. TEL: 886-3-4690038 FAX: 886-3-4697532 E-mail: [email protected] Web: www.taisaw.com SAW Filter 138.24MHz 76MHz BW (SMD 5×7 mm) MODEL NO.: TB0695A Rev No.2 RoHS Compliant Lead free Lead-free soldering A. MAXIMUM RATING: 1. Operating temperature range: -30°C to 60°C 2. Storage temperature range: -40°C to 85°C 3. Input Power Level : 10 dBm Electrostatic Sensitive Device 4. Maximum DC Voltage : 10V B. ELECTRICAL CHARACTERISTICE: Ambient Temperature:25oC Item Unit MHz Min. - Type. 138.24 Max. - dB - 22 24 Upper -1dB frequency MHz 176.24 177.731 - Lower -1dB frequency MHz - 97.77 100.24 Upper –35dB frequency MHz - 183.4 186.0 Lower –35dB frequency MHz 90.0 93.9 - dB 34 45 dBp-p - 1.0 1.5 ppm/°C - -72 - Source Impedance (Balanced) Ohm - 50 - Load Impedance (Balanced) Ohm - 50 - Center frequency, Fc Insertion Loss, IL Ultimate rejection Passband Ripple to 1dB frequencies Temperature Coefficient TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 2 C. FREQUENCY CHARACTERISTICE: (1) Wide band Response:(span 600MHz) Fig1. Horizontal: 60MHz/Div Vertical: 10dB/Div (2) Pass band Response and Group Time Delay Response: Fig2. Horizontal: 10MHz/Div TAI-SAW TECHNOLOGY CO., LTD. Vertical: 1dB/Div Vertical: 50ns/Div TST DCC Release document 3 (3) Smith Chart: D. MATCHING CIRCUIT: L1=L2=L3=L4=24nH C1=24pF C2=2pF TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 4 E. OUTLINE DRAWING: Pin J –RF Input Pin L –RF Balance Input or to be Ground Pin D –RF Output Pin F –RF Balance Output or to be Ground Pin A,B,C,G,H,I - Ground □ : Week Code Unit : mm △ : Product / Year Code Product Code Table Year 2013 2017 2014 2018 2015 2019 2016 2020 Product Code B b B b Week Code Table WK01 A WK14 N WK27 a WK40 n WK02 WK03 WK04 B C D WK15 WK16 WK17 O P Q WK28 WK29 WK30 b c d WK41 WK42 WK43 o p q WK05 E WK18 R WK31 e WK44 r WK06 WK07 WK08 F G H WK19 WK20 WK21 S T U WK32 WK33 WK34 f g h WK45 WK46 WK47 s t u TAI-SAW TECHNOLOGY CO., LTD. WK09 I WK22 V WK35 i WK48 v WK10 WK11 WK12 J K WK23 WK24 WK25 W X k x Z WK39 l WK49 WK50 WK51 w M WK26 Y WK36 WK37 WK38 j WK13 L m WK52 y TST DCC Release document z 5 F. PCB FOOTPRINT: G. PACKING: 1. REEL DIMENSION (Please refer to FR-75D10 for packing quantity) TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 6 2. TAPE DIMENSION H. RECOMMENDED REFLOW PROFILE: 1. Preheating shall be fixed at 150~180℃ for 60~90 seconds. 2. Ascending time to preheating temperature 150℃ shall be 30 seconds min. 3. Heating shall be fixed at 220℃ for 50~80 seconds and at 260℃+0/-5℃ peak (20~40sec). 4. Time: 2 times. TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 7