TAI-SAW TECHNOLOGY CO., LTD. No.3, Industrial 2nd Rd., Ping-Chen Industrial District, Taoyuan, Taiwan, R.O.C. TEL: 886-3-4690038 FAX: 886-3-4697532 E-mail: [email protected] Web: www.taisaw.com SAW Filter 138.24MHz 76MHz BW (SMD 5×7 mm) MODEL NO.: TB0713A Rev No.1 A. MAXIMUM RATING: 1. Operating temperature range: -10°C to 80°C 2. Storage temperature range: -40°C to 85°C 3. Input Power Level : 10 dBm 4. Maximum DC Voltage : 10V RoHS Compliant Lead free Lead-free soldering B. Characteristics : Item Unit MHz Min. - Type. 138.24 Max. - dB - 23.8 25 Upper -1dB frequency MHz 176.24 177.3 - Lower -1dB frequency MHz - 98.92 100.24 Upper –35dB frequency MHz - 183.00 186 Lower –35dB frequency MHz 90 96.2 - dB - 0.7 1.5 Center frequency, Fc Insertion Loss, IL Passband Ripple Fc+/- 38MHz Attenuation (Reference level from minimum Insertion loss ) 190 MHz ~ 290 MHz dB 30 35 290 MHz ~ 390 MHz dB 25 28 390 MHz ~ 600 MHz dB 35 39 ppm/°C - -72 - Source Impedance Ohm - 50 - Load Impedance Ohm - 50 - Temperature Coefficient TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 2 C. Frequency Characteristics : (1) Wide band Response:(span 600MHz) Fig1. Horizontal: 60MHz/Div Vertical: 10dB/Div (2) Pass band Response and Group Time Delay response: Fig2. Horizontal: 10MHz/Div TAI-SAW TECHNOLOGY CO., LTD. Vertical: 1dB/Div Vertical: 20ns/Div TST DCC Release document 3 (3) Smith Chart: D. Matching Circuit: J L D F L1=100nH L2=82nH C1=39pF C2=6pF Zin=50ohm Zout=50ohm TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 4 E. Outline Drawing: 7 T 1 3 Δ □ Pin J –RF input Pin L –RF input ground Pin D –RF output Pin F –RF ontput ground Pin A,B,C,G,H,I - Ground □ : Week Code (Follow the table from planner each year) Unit : mm △ : Product / Year Code Year 2005 2009 2006 2010 2007 2011 2008 2012 Product Code B b B b TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 5 F. PCB Footprint: G. PACKING: 1. REEL DIMENSION TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 6 2. TAPE DIMENSION 7 1 3 360 340 320 300 280 260 240 220 200 180 160 140 120 100 80 60 40 20 280 260 240 220 200 180 160 140 120 100 80 60 40 20 0 Temp ( Deg C) H. RECOMMENDED REFLOW PROFILE : Time (Sec) TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 7