TAI-SAW TECHNOLOGY CO., LTD. No.3, Industrial 2nd Rd., Ping-Chen Industrial District, Taoyuan, Taiwan, R.O.C. TEL: 886-3-4690038 FAX: 886-3-4697532 E-mail: [email protected] Web: www.taisaw.com SAW Filter 190MHz 4MHz BW (SMD 5.0×7.0 mm) MODEL NO.: TB0909A REV. NO.1 A. MAXIMUM RATING: 1. Operating temperature range: -30°C to 85°C 2. Storage temperature range: -40°C to 85°C 3. Input Power Level : 10 dBm 4. Maximum DC Voltage : 10V RoHS Compliant Lead free Lead-free soldering B. Characteristics : Item Unit MHz Min. - Type. 190 Max. - dB - 7.7 10.0 MHz - 187.2 188 1dB Upper Bandedge 192 192.6 10dB Lower Bandedge 185 185.8 Center frequency, Fc Insertion Loss, IL 1dB Lower Bandedge 10dB Upper Bandedge 194 30dB Lower Bandedge 183.5 30dB Upper Bandedge 195 185.0 194.8 196.5 Passband Ripple Fc+/- 2MHz dB - 0.4 1.0 Group Delay Ripple Fc+/- 2MHz ns - 50 200 ppm/°C - -23 - Source Impedance Ohm - 50 - Load Impedance Ohm - 50 - Temperature Coefficient TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 2 C. Frequency Characteristics : (1) Wide band Response:(span 100MHz) Fig1. Horizontal: 10MHz/Div Vertical: 10dB/Div (2) Pass band Response and Group Time Delay response: Fig2. Horizontal: 1MHz/Div TAI-SAW TECHNOLOGY CO., LTD. Vertical: 1dB/Div Vertical: 100ns/Div TST DCC Release document 3 D. Matching Circuit: L1=47nH L2=56nH C1=24pF C2=24pF E. Outline Drawing: 9 0 9 Pin J –RF input Pin D –RF output Pin A,B,C,F.G,H,I.L - Ground □ : Week Code (Follow the table from planner each year) Unit : mm △ : Product / Year Code Year 2009 2013 2010 2014 2011 2015 2012 2016 Product Code B b B b TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 4 F. PCB Footprint: G. PACKING: 1. REEL DIMENSION 2. TAPE DIMENSION TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 5 9 0 9 360 340 320 300 280 260 240 220 200 180 160 140 120 100 80 60 40 20 280 260 240 220 200 180 160 140 120 100 80 60 40 20 0 Temp ( Deg C) H. RECOMMENDED REFLOW PROFILE : Time (Sec) TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 6