TAI-SAW TECHNOLOGY CO., LTD. No.3, Industrial 2nd Rd., Ping-Chen Industrial District, Taoyuan, Taiwan, R.O.C. TEL: 886-3-4690038 FAX: 886-3-4697532 E-mail: [email protected] Web: www.taisaw.com SAW Filter 184.32MHz 5MHz BW (SMD 3.8×3.8 mm) MODEL NO.: TB0995A REV. NO.1 A. MAXIMUM RATING: 1. Operating temperature range: -30°C to 85°C 2. Storage temperature range: -40°C to 85°C 3. Input Power Level : 15 dBm 4. Maximum DC Voltage : 10V B. Characteristics : 1. Ambient Temperature: RoHS Compliant Lead free Lead-free soldering Electrostatic Sensitive Device 25 oC Item Unit MHz Min. - Type. 184.32 Max. - dB - 5.2 8.0 -1dB bandwidth MHz - 4.4 - VSWR Fc+/- 1.5MHz MHz - 2.0 2.4 dB - 1.6 2.0 10MHz ~ 176.82MHz dB 30 37 191.82MHz ~ 284.32MHz dB 30 39 ppm/°C - -18 - Source Impedance Ohm - 50 - Load Impedance Ohm - 50 - Center frequency, Fc Insertion Loss, IL Passband Ripple Fc+/- 2.5MHz Attenuation:(Reference level from Min IL) Temperature Coefficient Note: Electrical characteristics shall be calculated with ideal capacitor and inductor. TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 2 C. Frequency Characteristics : (1) Wide band Response:(span 100MHz) Fig1. Horizontal: 10MHz/Div Vertical: 10dB/Div (2) Pass band Response and Group Time Delay Response: Fig2. Horizontal: 1MHz/Div TAI-SAW TECHNOLOGY CO., LTD. Vertical: 1dB/Div Vertical: 50ns/Div TST DCC Release document 3 D. Matching Circuit: Ls2=125nH Ls3=110nH Cp1=27pF Cp4=24pF E Outline Drawing: 9 9 5 #A –Input #E – Output #B,C,D,F,G,H – Ground □ : Week Code (Follow the table from planner each year) Unit : mm △ : Product / Year Code Year 2009 2011 2010 2012 Product Code B b TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 4 F. PCB Footprint: G. PACKING: 1. REEL DIMENSION: TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 5 2. TAPE DIMENSION: 360 340 320 300 280 260 240 220 200 180 160 140 120 100 80 60 40 20 280 260 240 220 200 180 160 140 120 100 80 60 40 20 0 Temp ( Deg C) H. RECOMMENDED REFLOW PROFILE : Time (Sec) TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 6