TAI-SAW TECHNOLOGY CO., LTD. No. 3, Industrial 2nd Rd., Ping-Chen Industrial District, Taoyuan, 324, Taiwan, R.O.C. TEL: 886-3-4690038 FAX: 886-3-4697532 E-mail: [email protected] Web: www.taisaw.com IF SAW Filter 828MHz SMD 13.3X6.5mm MODEL NO.: TB1008A REV. NO.1 A. MAXIMUM RATING: 1. 1. Operating temperature range: -25°C to 55°C 2. Storage temperature range: -40°C to 85°C 3. Input Power Level : 10 dBm 4. Maximum DC Voltage : 10V B. Characteristics : 1. Ambient Temperature: 25 °C Characteristics Min. - Center frequency FC MHz Maximum Insertion loss I.L. dB 1dB Band Width MHz 14.0 38dB Band Width MHz Passband Ripple at FC±6.5 MHz dB Attenuation (Reference level from minimum Insertion loss ) 803MHz~815.5MHz dB 32 840.5MHz~853MHz dB 32 Single Input Impedance Ohm Single Output Impedance Temperature Coefficient RoHS Compliant Lead free Lead-free soldering Electrostatic Sensitive Device Value Typ. 828 Max. - 23.5 14.5 18.4 0.5 26.0 19.0 1.0 37 37 50 - Ohm - 50 - ppm/°C2 - -0.036 - TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document - 2 - C. Frequency Responses: 1. Wide band response Fig1. Horizontal: 5MHz/Div Vertical: 10dB/Div 2. Pass band & Group Delay response Fig2. Horizontal: 2MHz/Div Vertical: 1dB/Div Vertical: 100ns/Div TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document - 3 - D. Outline Drawing: 1008 #K : Input #L : Input Ground #E : Output #F : Output Ground #A,B,C,D,G,H,I,J : Ground : Week Code (Follow the table from planner each year) Unit: mm △ : Product / Year Code Year 2009 2013 2010 2014 2011 2015 2012 2016 Product Code B b B b E. Measurement Circuit: Matching Circuit: Zin=Zout=50ohm L1=3nH L2=3nH C1= 10pF C2=10pF TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document - 4 - F. PCB Footprint G. PACKING: 1. REEL DIMENSION TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document - 5 - 2. TAPE DIMENSION 360 340 320 300 280 260 240 220 200 180 160 140 120 100 80 60 40 20 280 260 240 220 200 180 160 140 120 100 80 60 40 20 0 Temp ( Deg C) H. RECOMMENDED REFLOW PROFILE : Time (Sec) TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document - 6 -