TAI-SAW TECHNOLOGY CO., LTD. No. 3, Industrial 2nd Rd., Ping-Chen Industrial District, Taoyuan, 324, Taiwan, R.O.C. TEL: 886-3-4690038 FAX: 886-3-4697532 E-mail: [email protected] Web: www.taisaw.com SAW Filter 169.4375MHz MODEL NO.: TB1064A REV. NO.:1 A. MAXIMUM RATING: 1. Input Power Level: 10 dBm 2. DC voltage : 5 V RoHS Compliant Lead free Lead-free soldering 3. Operating Temperature: -20°C to +70°C 4. Storage Temperature: -40°C to +85°C Electrostatic Sensitive Device (ESD) B. ELECTRICAL CHARACTERISTICS: Item Unit Center frequency, Fc MHz Min. - Typ. 169.4375 Max. - Note - dB - 3 5 - dB - 0.1 ±1 - MHz dB 40 60 - - Fc – 0.92 to Fc – 0.31 MHz dB 30 55 - - Fc + 0.31 to Fc + 0.92 MHz dB 30 55 - - Fc + 0.92 to MHz dB 40 42 - - Insertion loss at center frequency ILc Ripple (169.43375 ~ 169.44125 MHz) Attenuation ( reference level from ILc ) Fc - 4 to Fc – 0.92 Fc + 4 Temperature coefficient of frequency TCf -0.033 ppm/C^2 Note1. Considering -12 KHz frequency shift from –20℃ to +70℃ TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 2 C. OUTLINE DRAWING: 1064 T△□ Pin configuration #9 Input #4 Output #10 Balance input or input ground #5 Balance output or output ground #1,2,3,6,7,8 To be grounded Product Year Code △ : Year code 2009 2010 2011 2013 2014 2015 Year Product Code B b B □ : Date code 2012 2016 b D. MEASUREMENT CIRCUIT: 50 Ohm Test circuit ( single-ended / single-ended ) HP Network analyzer IN 180nH 180nH 9 50Ω SAW Filter 10 OUT 4 50Ω 5 1pF 1pF 1,2,3,6,7,8 TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 3 E. Frequency Characteristics : TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 4 F. PACKING: 1. REEL DIMENSION 2.TAPE DIMENSION 1208 064 TB TB Direction of Feed TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 5 G. RECOMMENDED REFLOW PROFILE : 1. 2. 3. 4. Preheating shall be fixed at 150~180℃ for 60~90 seconds. Ascending time to preheating temperature 150℃ shall be 30 seconds min. Heating shall be fixed at 220℃ for 50~80 seconds and at 245~260℃ peak (min. 10sec). Time : 2 times. TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 6