TAI-SAW TECHNOLOGY CO., LTD. No. 3, Industrial 2nd Rd., Ping-Chen Industrial District, Taoyuan, 324, Taiwan, R.O.C. TEL: 886-3-4690038 FAX: 886-3-4697532 E-mail: [email protected] Web: www.taisaw.com Approval Sheet For Product Specification Issued Date: 5/8/2003 (REV NO.: 3) Product Name: SMD 7.6x5.8 GSM / DCS Dual Band VCO TST Parts No.: TV0110A Customer Parts No.: Company: Division: Approved by : Date: Checked by: Eric Wu Approval by: TF Yang Date: 5/8/2003 TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document FR-03S06-02 TAI-SAW TECHNOLOGY CO., LTD. No. 3, Industrial 2nd Rd., Ping-Chen Industrial District, Taoyuan, 324, Taiwan, R.O.C. TEL: 886-3-4690038 FAX: 886-3-4697532 E-mail: [email protected] Web: www.taisaw.com SMD 7.6x5.8 GSM / DCS Dual Band VCO MODEL NO.: TV0110A REV. NO.:3 Description and Applications: Part will serve as GSM TX VCO module for Philips OM5178. Conditions: Measurements shall be made under room temperature and humidity unless otherwise specified. (temperature 25+/-5 deg C and Humidity 45~75% RH) Limits Parameter Symbol Units min. typ. max. Supply Voltage Vcc 2.5 2.7 2.9 V Control Voltage Range Vt 0.8 1.9 3.0 V Load Impedance - - 50 - Ohm Temperature Range - -30 25 70 ℃ Electrical Specifications: For different applications, the specification change is possible. Please contact TST sales representative or application engineer for your requirement. Limits Parameter Condition Units min. typ. max. Power Consumption Operation Frequency Range Control Voltage Sensitivity Output Level GSM - - - 25 DCS - - - 30 GSM - 880 - 915 DCS - 1710 - 1785 GSM - 21 27 33 DCS - 44 54 64 GSM DCS - 4.5 4.0 6.5 6.5 8.5 9.0 dBm 10 KHz sep. 85 - - dBc/ Hz 100 KHz sep. 600 KHz sep. 10 MHz sep. 20 MHz sep. 10 KHz sep. 110 132 156 162 85 - - 100 KHz sep. 110 - - 600 KHz sep. 129 - - 10 MHz sep. 153 - - C/N GSM DCS TAI-SAW TECHNOLOGY CO., LTD. mA MHz MHz/V TST DCC Release document 2 20 MHz sep. Pushing Figure Pulling Figure Harmonics (2fo, 3fo…) Spurious 156 - - -2 -3 -4 - 2 3 4 -5 - 5 GSM - - -15 DCS - - -15 GSM - - -70 DCS - - -70 - 15 - GSM DCS GSM DCS Vcc=2.7+/-0.2V VSWR=2.0 for all phase, ref:50Ohm Control Voltage Input Capacitance MHz MHz dBc dBc pF Logic Condition Parameter Switch Voltage Switch Current Condition Limits typ. - Logic low: VCO on min. 0 max 0.3 Logic high: VCO off 2.0 - 2.9 Logic low/high -100 - 100 Unit V uA Mechanical Dimensions (mm): TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 3 Marking: Line 1: TST P/N (0110) Line 2: TST Logo + VCO Product Code + Date Code Product Code Table: Year 2001 2005 2002 2006 2003 2007 2004 2008 Product Code V v V v Date Code Table: WK01 WK02 WK03 WK04 WK05 WK06 WK07 WK08 WK09 WK10 WK11 WK12 WK13 A B C D E F G H I J K L M WK14 WK15 WK16 WK17 WK18 WK19 WK20 WK21 WK22 WK23 WK24 WK25 WK26 N O P Q R S T U V W X Y Z WK27 WK28 WK29 WK30 WK31 WK32 WK33 WK34 WK35 WK36 WK37 WK38 WK39 a b c d e f g h i j k l m WK40 WK41 WK42 WK43 WK44 WK45 WK46 WK47 WK48 WK49 WK50 WK51 WK52 n o p q r s t u v w x y z Part Orientation: Tape & Reel: TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 4 [NOTE] 1. UNIT : MM. 2. UNLESS OTHERWISE SPECIFIED TOLERANCE ON DIM. +/-0.1MM. 3. MATERIAL : CONDUCTIVE POLYSTYRENE WITH COLOR BLACK. 4. 10 PITCH CUMULATIVE TOLERANCE +/-0.2MM. Notes of the Usage: 1. Touch the solder iron at 260+/-5 deg C onto the leads for 10+/-2 sec max or touch the solder at 350+/-5 deg C onto the leads for 3+/-0.5 sec. 2. In the customer’s reflow process, if it will remain some mechanical stress at the soldering terminals, also make some cracks on the soldering termination. Some cracks will cause open or short circuit and cause of thermal increasing or smoking. Don’t make any excess mechanical stress to soldering points. 3. In case of giving a heavy shock to the products, it may make an open or short circuit and cause of thermal increasing and smoking. To avoid heavy shock impact applying to products is strictly required. 4. please take measurement against static electricity. Don’t open the shield case of this product. Notes of the Storage: 1. To keep products under the condition at the room temperature (-5~35 deg C) with normal humidity (45~75%). Absorption of moisture and dew-drop may make inferiority of characteristics and a short circuit. 2. Oxidization of terminals shall make the solderability more inferior. Dusts and corrosive gas will make a cause of the open or short circuit. Keep it in the clean place where is not in dusty and no corrosive gas. 3. Use the unti-static material to the storage package. 4. Don’t put any excess weight to the VCO in the storage process. 5. Don’t move the product from the cold place to the hot place in the short time, otherwise it may make some dew-drop, then a short circuit may happen in case. 6. Storage periods should be maximum 6 months under condition of above item 1 after delivery from TST factory. 7. This product should not be stressed or shocked when transported. TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 5