TAI-SAW TECHNOLOGY CO., LTD. No. 3, Industrial 2nd Rd., Ping-Chen Industrial District, Taoyuan, 324, Taiwan, R.O.C. TEL: 886-3-4690038 FAX: 886-3-4697532 E-mail: [email protected] Web: www.taisaw.com Approval Sheet For Product Specification Issued Date: 12/2/2004 (REV NO.: 1) Product Name: SMD 5.0x4.0 DAB VCO TST Parts No.: TV0113A Customer Parts No.: Company: Division: Approved by : Date: Checked by: Ryan Huang Approval by: TF Yang Date: 12/2/2004 TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document FR-71S03-01 TAI-SAW TECHNOLOGY CO., LTD. No. 3, Industrial 2nd Rd., Ping-Chen Industrial District, Taoyuan, 324, Taiwan, R.O.C. TEL: 886-3-4690038 FAX: 886-3-4697532 E-mail: [email protected] Web: www.taisaw.com SMD 5.0x4.0 DAB VCO MODEL NO.: TV0113A REV. NO.:1 Description and Applications: Part will serve as VCO for DAB. Conditions: Parameter Symbol Limits typ. 2.8 max. 2.9 Units Supply Voltage Vcc min. 2.7 Control Voltage Range Vt 0.5 1.35 2.2 V Load Impedance - - 50 - Ohm Temperature Range - -40 25 85 ℃ V Electrical Specifications: For different applications, the specification change is possible. Please contact TST sales representative or application engineer for your requirement. Limits Parameter Condition Units min. typ. max. 23+-3 deg.C -40~+ Operation Frequency Range 85 deg.C 23+-3 Control Voltage Sensitivity deg.C 23+-3 Output Level deg.C 23+-3 C/N 100 KHz sep. deg.C 23+-3 Vcc=2.8+-0.1 V, ref Pushing Figure deg.C Vcc=2.8V 23+-3 VSWR=2.0 for all Pulling Figure deg.C phase, ref:50Ohm 23+-3 Harmonics (2fo, 3fo) deg.C Control Voltage Input 23+-3 Capacitance deg.C Current Consumption - - 10 MA 1230 - 1290 MHz 55 65 75 MHz/V -3 0 3 DBm 105 - - dBc/Hz -1 - 1 MHz -2 - 2 MHz - - -15 dBc - - 50 pF TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 2 Mechanical Dimensions (mm): Marking: Line 1: TST P/N (0113) Line 2: TST Logo + VCO Product Code + Date Code Product Code Table: Year 2001 2005 2002 2006 2003 2007 2004 2008 Product Code V v V v Date Code Table: WK01 WK02 WK03 WK04 WK05 WK06 WK07 WK08 WK09 WK10 WK11 WK12 A B C D E F G H I J K L WK13 M WK14 WK15 WK16 WK17 WK18 WK19 WK20 WK21 WK22 WK23 WK24 WK25 WK26 N O P Q R S T U V W X Y Z WK27 WK28 WK29 WK30 WK31 WK32 WK33 WK34 WK35 WK36 WK37 WK38 WK39 a b c d e f g h i j k l m WK40 WK41 WK42 WK43 WK44 WK45 WK46 WK47 WK48 WK49 WK50 WK51 WK52 n o p q r s t u v w x y z TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 3 Tape & Reel & Orientation: [NOTE] 1. UNIT : MM. 2. UNLESS OTHERWISE SPECIFIED TOLERANCE ON DIM. +/-0.1MM. 3. MATERIAL : CONDUCTIVE POLYSTYRENE. 4. COLOR : BLACK. 5. 10 PITCH CUMULATIVE TOLERANCE +/-0.2MM. TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 4