TAI-SAW TECHNOLOGY CO., LTD. SMD 7.0x5.0 61.44MHz VCXO MODEL NO.: TX0582A REV. NO.: 1.0 Revise: Rev. Rev. Page Rev. Account Date 1.0 N/A Initial release 04/30/13’ N/A TAI-SAW TECHNOLOGY CO., LTD. Ref. No. Reviser Ginger Huang TST DCC Release document 2 TAI-SAW TECHNOLOGY CO., LTD. No. 3, Industrial 2nd Rd., Ping-Chen Industrial District, Taoyuan, 324, Taiwan, R.O.C. TEL: 886-3-4690038 FAX: 886-3-4697532 E-mail: [email protected] Web: www.taisaw.com 7.0x5.0 VCXO 61.44 MHz MODEL NO.: TX0582A REV. NO.:1.0 Features: RoHS Compliant Lead free 1. 3.3V Operation / Complementary CMOS Output Lead-free soldering 2. Enable / Disable Function (6-Pad) 3. Main application: WLAN, SONET/SDH/DWDM, Gigabite Ethernet, Storage Area Network, Digital Video 4. Surface mount 5.0mmx7.0mm crystal oscillator Electrical Specifications: Characteristics Units Center Frequency Storage Temperature Range OperatingTemperature Range Frequency Stability MHz °C °C ppm OperatingTemperature Range * Absolute Pulling Range (APR) ppm Input Voltage (Operating Vdd) VDC Control Voltage (Vt) VDC Current Consumption mA Output Minimum Typical Maximum 61.44 -55 -40 125 85 +/-50 +/-50 0.3 - 3.3+/-10% CMOS 3.0 30 Load ohm - 15 - “0” Level ( Output Logic Low) VDC - - 10%VDD “1” Level ( Output Logic High) VDC 90%VDD - - % 45% - 55% Rise Time (10%->90% VDD) nSec - - 3.0 Fall Time (90%->10% VDD) nSec - - 3.0 Start-up Time mSec - - 5.0 V V 0.7VDD - - 0.3VDD Phase Jitter (Integrated 12K~20MHz) pSec - - 1.0 Absolute Clock Period Jitter pSec - - 40 % - - 10 Modulation Bandwidth(BW) KHz 15 - - Input Impedance KΩ 2000 - - Duty Cycle Enable (High Voltage) Disable (Low Voltage) Linearity TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 3 Aging (@25°C 1st year) Phase Noise 100Hz 1KHz 10KHz ppm - - +/-3.0 dBc/Hz - - -100 -125 -140 PIN#2: High or Open , PIN#4, #5: Enable Enable/Disable Function PIN#2: Low , PIN#4, #5: Disable Package size SMD7.0x5.0x1.6mm * Note1 : APR=Pull Range-(frequency tolerance at 25℃,variation over temperature, supply voltage and aging) Mechanical Dimensions (mm): Marking: Line 1 : Frequency (61.440) Line 2 : T XDAX (TST logo + Product Code + Data Code + Traceability Code ) Product Code Table Year product code 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 X x X x TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 4 Date Code Table WK01 WK02 WK03 WK04 WK05 WK06 WK07 WK08 WK09 WK10 WK11 WK12 A B C D E F G H I J K L WK13 M WK14 WK15 WK16 WK17 WK18 WK19 WK20 WK21 WK22 WK23 WK24 WK25 WK26 N O P Q R S T U V W X Y Z WK27 WK28 WK29 WK30 WK31 WK32 WK33 WK34 WK35 WK36 WK37 WK38 WK39 a b c d e f g h i j k l m WK40 WK41 WK42 WK43 WK44 WK45 WK46 WK47 WK48 WK49 WK50 WK51 WK52 n o p q r s t u v w x y z Tape & Reel: Reel dimension (unit: mm) Tape dimension (unit: mm) TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 5 Packing direction Packing Quantity/Packing: 1K pcs maximum per reel Reflow Profile: TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 6 Note: 1.Max peak temperature: 260+/-5 deg C; Time: 10+/-2 sec 2. Temperature: 217+/-5 deg C; Time: 90~100 sec TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 7 Reliability Specifications Test name Reference standard Test process / method Mechanical characteristics resistance to Soldering heat (IR reflow) Temp./ Duration : 260°C /10sec ×2 times Total time : 4min.(IR-reflow) Vibration Total peak amplitude : 1.5mm Vibration frequency : 10 to 55 Hz Sweep period : 1.0 minute Vibration directions : 3 mutually perpendicular Duration : 2 hr / direc. directions : 3 impacts per axis Acceleration : 3000g's, +20/-0 % Duration : 0.3 ms (total 18 shocks) Waveform : Half-sine Solder Temperature:265±5°C Duration time: 5±0.5 seconds. Mechanical Shock Solderability EIAJED-4701 -300(301)M(II) MIL-STD 202F method 201A MIL-STD 202F method 213C MIL-STD 883G method 2003 Environmental characteristics Thermal Shock Humidity test Dry heat ( Aging test ) PCT test Heat cycle conditions -55 ℃ (30min) ←→ * cycle time : 10 times 125 ℃ (30min) Temperature : 70 ± 2 °C Relative humidity : 90~95% Duration : 96 hours Temperature : 125 ± 2 °C Duration : 168 hours 2 MIL-STD 883G method 1010.7 MIL-STD 202F method 103B 5 Pressure: 2.06kg/cm (2.03*10 pa) Temperature : 121 ± 2 °C Relative humidity : 100% Duration : 24 hours TAI-SAW TECHNOLOGY CO., LTD. MIL-STD 883G method 1008.2 condition C EIAJED-4701-3 B-123A TST DCC Release document 8