TAI-SAW TECHNOLOGY CO., LTD. No. 3, Industrial 2nd Rd., Ping-Chen Industrial District, Taoyuan, 324, Taiwan, R.O.C. TEL: 886-3-4690038 FAX: 886-3-4697532 E-mail: [email protected] Web: www.taisaw.com Approval Sheet For Product Specification Issued Date: 7/20/2004 (REV. NO: 4) Product Name: SMD 5.0x3.2 23.104MHz Crystal Unit TST Parts No.: TZ0499A Customer Parts No. : Company: Division: Approved by: Date: Checked by: Kelly Huang Approval by: TF Yang Date: 7/20/2005 TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document FR-71S03-01 TAI-SAW TECHNOLOGY CO., LTD. No. 3, Industrial 2nd Rd., Ping-Chen Industrial District, Taoyuan, 324, Taiwan, R.O.C. TEL: 886-3-4690038 FAX: 886-3-4697532 E-mail: [email protected] Web: www.taisaw.com SMD 5.0x3.2 23.104MHz Crystal Unit MODEL NO.: TZ0499A REV. NO.: 4 Features: RoHS Compliant Lead free Lead-free soldering Surface Mount Seam Weld Package Excellent Reliability Performance Good Frequency Perturbation and Stability over temperature Description and Applications: Surface mount 5.0mmx3.2mm crystal unit for GPS application. Electrical Specifications: TZ0499A Specification Nominal Frequency 23.104000 MHz Mode of Oscillation Parallel Resonance, Fundamental Mode Operating Temperature Range -40°C to +85°C Frequency Stability over Operating Temperature Range +/-15 ppm (referred to the value at 25°C) Frequency Perturbations1 +/-0.5 ppm Static Temperature Hysteresis2 +/-0.4 ppm Frequency Make Tolerance (FL) +/-7 ppm @ 25°C +/- 3°C Load Capacitance (CL) 19 pF Equivalent Series Resistance (ESR) 30 Ω max Drive Level 10 uW nom., 200 uW max. Shunt Capacitance (Co) 6 pF max Drive Level Dependence (Delta R) 0.6 ohms max (10 drive level points: 0.001, 0.05, 0.01, 0.05, 0.1, 0.5, 1, 10, 50, 100 uW) Pullability 12 ppm/pF max Short Term Stability (Root Allan Variance for 1 second Tau) 1.0 ppb max Long Term Stability, frequency drift over 1 year +/-1.0 ppm Long Term Stability, frequency drift over 2 years +/-1.5 ppm TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 2 Long Term Stability, frequency drift over 10 years +/-5.0 ppm G Sensitivity, all 3 axes, random vibration, 30Hz to 1.5KHz 1.5 ppb max per G Shock, frequency shift after 1000G 250uS sine +/-0.5 ppm Insulation Resistance 500 MΩ min./DC 100V Marking Laser marking Note: 1. Peak to peak deviation from the frequency versus AT temperature curve fit. Minimum of 1 frequency reading every 3 ° C over operating temperature range. 100% testing and screening for frequency perturbations and micro jump occurrence. 2. Frequency change after reciprocal temperature ramped over the operating temperature range. Frequency measured before and after at 25°C. Environmental Specifications Shock Half since wave acceleration of 100 G peak amplitude for 11 ms duration, 3 cycles each plane Vibration 10G RMS 30Hz to 1500Hz, duration of 6 hours Humidity Thermal Shock Storage Temperature 48 hours at 85°C 85% relative humidity non-condensing Exposed at -40°C for 30 minutes then to +85°C for 30 minutes constantly for 120 cycles (5 days) -40°C to +85°C Mechanical Dimensions (mm): #1 pin #2 pin #3 pin #4 pin TAI-SAW TECHNOLOGY CO., LTD. Pin Connection IN/OUT GND IN/OUT GND TST DCC Release document 3 Recommended Land Pattern: (unit: mm) Marking: Line 1: Frequency (23.104) Line 2: TST Logo + Crystal Product Code + Date Code Product Code Table Year 2001 2005 2002 2006 2003 2007 2004 2008 Product Code Z z Z z Date Code Table WK01 WK02 WK03 WK04 WK05 WK06 WK07 WK08 WK09 WK10 WK11 WK12 A B C D E F G H I J K L WK13 M WK14 WK15 WK16 WK17 WK18 WK19 WK20 WK21 WK22 WK23 WK24 WK25 WK26 N O P Q R S T U V W X Y Z WK27 WK28 WK29 WK30 WK31 WK32 WK33 WK34 WK35 WK36 WK37 WK38 WK39 a b c d e f g h i j k l m WK40 WK41 WK42 WK43 WK44 WK45 WK46 WK47 WK48 WK49 WK50 WK51 WK52 n o p q r s t u v w x y z Reel Dimensions (mm): TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 4 Tape Dimensions (mm): Direction of Feed [NOTE]: 1. Unless otherwise specified tolerance on dimension +/-0.1 mm. 2. Material: conductive polystyrene with color black. 3. 10 pitch cumulative tolerance +/-0.2 mm. Reflow Profile: 300 Reflow Area Rising Area Preheat Area Forced Cooling Area Temperature (deg C) 250 200 150 Max peak temperature: 260 deg C 100 50 0 0 60 120 180 240 300 360 Time (seconds) TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 5