2/7 TAI-SAW TECHNOLOGY CO., LTD. SMD 5.0x3.2 40.000MHz Crystal Unit MODEL NO.: TZ0530A REV. NO.: 5 Revise: Rev. Rev. Page Rev. Account Date 1 2 3 4 5 N/A N/A P4 P3 P4 Initial release N/A Change Base &Lid Change Frequency Make Tolerance N/A’ N/A 4/3/08 N/A 5/14/08 ECN-2008079 5/30/08 4/14/10 Change Marking Rule Ref. No. TST DCC Release document TAI-SAW TECHNOLOGY CO., LTD. Reviser N/A CC Hsu Rodic Chen Rodic Chen Naco Kuo 3/7 TAI-SAW TECHNOLOGY CO., LTD. SMD 5.0x3.2 40.000MHz Crystal Unit MODEL NO.: TZ0530A REV. NO.: 5 Features: Surface Mount Hermetic Package Excellent Reliability Performance Good Frequency Perturbation and Stability over temperature Ultra Miniature Package RoHS Compliant Lead free Lead-free soldering Description and Applications: Surface mount 5.0mmx3.2mm crystal unit for use in wireless communications devices, especially for a need of ultra miniature package for mobility. Electrical Specifications: TZ0530A Specification Nominal Frequency 40.000000 MHz Mode of Oscillation Fundamental Storage Temperature Range -50°C to +125°C Operating Temperature Range -20°C to +85°C Frequency Stability over Operating Temperature Range +/-10 ppm (referred to the value at 25°C) Frequency Perturbation/ Curve Fit Tolerance +/- 1ppm/ curve fit 3rd Frequency Make Tolerance (FL) +/-10 ppm @ 25°C +/- 3°C Equivalent Series Resistance (ESR) 20 Ω max Nominal Drive Level 10uW normal, 400 uW max. Series Resistance of “Cold” Crystal Shunt Capacitance (Co) 200Ω max(with lowest test drive level 10 pW) 1.6 pF typical Motional Capacitance(C1) 6.4 fF typical Load Capacitance (CL) 15 pF Insulation Resistance 500 MΩ min./DC 100V Spurious Response - Near Fundament Frequency - At Overtone 120Ω max 65Ω max Marking Laser Marking Unit Weight 0.037+/-0.005g TST DCC Release document TAI-SAW TECHNOLOGY CO., LTD. 4/7 Mechanical Dimensions (mm): Pin Connection IN/OUT GND IN/OUT GND #1 pin #2 pin #3 pin #4 pin Recommended Land Pattern: (unit: mm) Marking: Line 1: Frequency (40.000) Line 2: TST Logo + Crystal Product Code + Date Code + Traceability Code. Product Code Table Date Code Table WK01 WK02 WK03 WK04 WK05 WK06 WK07 WK08 WK09 WK10 WK11 WK12 A B C D E F G H I J K L WK13 M WK14 WK15 WK16 WK17 WK18 WK19 WK20 WK21 WK22 WK23 WK24 WK25 WK26 N O P Q R S T U V W X Y Z WK27 WK28 WK29 WK30 WK31 WK32 WK33 WK34 WK35 WK36 WK37 WK38 WK39 a b c d e f g h i j k l m WK40 WK41 WK42 WK43 WK44 WK45 WK46 WK47 WK48 WK49 WK50 WK51 WK52 n o p q r s t u v w x y z TST DCC Release document TAI-SAW TECHNOLOGY CO., LTD. 5/7 Reel Dimensions (mm): Tape Dimensions (mm): Direction of Feed [NOTE]: 1. Unless otherwise specified tolerance on dimension +/-0.1 mm. 2. Material: conductive polystyrene with color black. 3. 10 pitch cumulative tolerance +/-0.2 mm. TST DCC Release document TAI-SAW TECHNOLOGY CO., LTD. Packing Quantity/Packing: 3K pcs maximum per reel Reflow Profile: Note: 1.Max peak temperature: 260+/-5 deg C; Time: 10+/-2 sec 2. Temperature: 217+/-5 deg C; Time: 90~100 sec TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 6/7 7/7 Reliability Specifications Test name Test process / method Reference standard Mechanical characteristics resistance to Soldering heat (IR reflow) Temp./ Duration : 260°C /10sec ×2 times Total time : 4min.(IR-reflow) Vibration Total peak amplitude : 1.5mm Vibration frequency : 10 to 55 Hz Sweep period : 1.0 minute Vibration directions : 3 mutually perpendicular Duration : 2 hr / direc. directions : 3 impacts per axis Acceleration : 3000g's, +20/-0 % Duration : 0.3 ms (total 18 shocks) W aveform : Half-sine Solder Temperature:265±5°C Duration time: 5±0.5 seconds. Mechanical Shock Solderability EIAJED-4701 -300(301)M(II) MIL-STD 202F method 201A MIL-STD 202F method 213C MIL-STD 883G method 2003 Environmental characteristics Thermal Shock Humidity test Dry heat ( Aging test ) PCT test Heat cycle conditions -55 ℃ (30min) ←→ * cycle time : 10 times 125 ℃ (30min) Temperature : 70 ± 2 °C Relative humidity : 90~95% Duration : 96 hours Temperature : 125 ± 2 °C Duration : 168 hours 2 MIL-STD 883G method 1010.7 MIL-STD 202F method 103B 5 Pressure: 2.06kg/cm (2.03*10 pa) Temperature : 121 ± 2 °C Relative humidity : 100% Duration : 24 hours TST DCC Release document TAI-SAW TECHNOLOGY CO., LTD. MIL-STD 883G method 1008.2 condition C EIAJED-4701-3 B-123A