2/7 TAI-SAW TECHNOLOGY CO., LTD. Crystal Unit SMD 2.5x2.0 26.0MHz MODEL NO.: TZ1432A REV. NO.: 3 Revise: Rev. Rev. Page Rev. Account Date 1 2 3 N/A 3 3 Initial release 7/15/08’ N/A Kelly Huang 3/26/09’ ECN-200900120 Kelly Huang 5/11/09’ ECN-200900192 Kelly Huang Changed FL spec and added TS spec. Corrected Cm and TS specification TAI-SAW TECHNOLOGY CO., LTD. Ref. No. Reviser TST DCC Release document 3/7 TAI-SAW TECHNOLOGY CO., LTD. Crystal Unit SMD 2.5x2.0 26.0MHz MODEL NO.: TZ1432A REV. NO.: 3 Features: Surface Mount Hermetic Package Excellent Reliability Performance Good Frequency Perturbation and Stability over temperature Ultra Miniature Package RoHS Compliant Lead free Lead-free soldering Description and Applications: Surface mount 2.5mmx2.0mm crystal unit for use in wireless communications devices, especially for a need of ultra miniature package for mobility. Electrical Specifications: TZ1432A Specification Nominal Frequency 26.000000 MHz Mode of Oscillation Fundamental Storage Temperature Range -40°C to +85°C Operating Temperature Range -30°C to +85°C Frequency Stability: (including item 1~3) 1. Frequency Make Tolerance (FL) 2. Over Operating Temperature Range 3. Aging1 (long term) 4. Aging2 (short term) +/-26ppm +/-10 ppm @ 25°C +/- 3°C +/-13 ppm (referred to the value at 25°C) +/-3ppm (period:5 years) +/-1ppm (period:1 year) Equivalent Series Resistance (ESR) 40 Ω max Nominal Drive Level 100 uW max. Shunt Capacitance (Co) 1.0+/-0.2 pF Motional Capacitance (C1) 3.6fF typical, (min:2.88fF, Max:4.32fF) Trim sensitivity 22.22ppm/pF typical (min:18.6fFppm/pF, Max:25.52ppm/pF) Load Capacitance (CL) 8.0 pF Insulation Resistance 500 MΩ min./DC 100V Marking Laser Marking Unit Weight 9.5 +/-0.5mg TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 4/7 Mechanical Dimensions (mm): Pin Connection IN/OUT GND IN/OUT GND #1 pin #2 pin #3 pin #4 pin Recommended Land Pattern: (unit: mm) Marking: Line 1: Frequency (26.0) Line 2: TST Logo + Date Code + Product Code Date Code Table WK01 WK02 WK03 WK04 WK05 WK06 WK07 WK08 WK09 WK10 WK11 WK12 A B C D E F G H I J K L WK13 M WK14 WK15 WK16 WK17 WK18 WK19 WK20 WK21 WK22 WK23 WK24 WK25 WK26 N O P Q R S T U V W X Y Z WK27 WK28 WK29 WK30 WK31 WK32 WK33 WK34 WK35 WK36 WK37 WK38 WK39 a b c d e f g h i j k l m WK40 WK41 WK42 WK43 WK44 WK45 WK46 WK47 WK48 WK49 WK50 WK51 WK52 n o p q r s t u v w x y z TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 5/7 Product Code Table: Reel Dimensions (mm): Tape Dimensions (mm): [NOTE]: 1. Unless otherwise specified tolerance on dimension +/-0.1 mm. 2. Material: conductive polystyrene with color black. 3. 10 pitch cumulative tolerance +/-0.2 mm. TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 6/7 Packing Quantity/Packing: 3K pcs maximum per reel Reflow Profile: Note: 1.Max peak temperature: 260+/-5 deg C; Time: 10+/-2 sec 2. Temperature: 217+/-5 deg C; Time: 90~100 sec TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 7/7 Reliability Specifications Test name Reference standard Test process / method Mechanical characteristics resistance to Soldering heat (IR reflow) Temp./ Duration : 260°C /10sec ×2 times Total time : 4min.(IR-reflow) Vibration Total peak amplitude : 1.5mm Vibration frequency : 10 to 55 Hz Sweep period : 1.0 minute Vibration directions : 3 mutually perpendicular Duration : 2 hr / direc. directions : 3 impacts per axis Acceleration : 3000g's, +20/-0 % Duration : 0.3 ms (total 18 shocks) Waveform : Half-sine Solder Temperature:265±5°C Duration time: 5±0.5 seconds. Mechanical Shock Solderability EIAJED-4701 -300(301)M(II) MIL-STD 202F method 201A MIL-STD 202F method 213C MIL-STD 883G method 2003 Environmental characteristics Thermal Shock Humidity test Dry heat ( Aging test ) PCT test Heat cycle conditions -55 ℃ (30min) ←→ * cycle time : 10 times 125 ℃ (30min) Temperature : 70 ± 2 °C Relative humidity : 90~95% Duration : 96 hours Temperature : 125 ± 2 °C Duration : 168 hours 2 MIL-STD 883G method 1010.7 MIL-STD 202F method 103B 5 Pressure: 2.06kg/cm (2.03*10 pa) Temperature : 121 ± 2 °C Relative humidity : 100% Duration : 24 hours TAI-SAW TECHNOLOGY CO., LTD. MIL-STD 883G method 1008.2 condition C EIAJED-4701-3 B-123A TST DCC Release document