2/7 TAI-SAW TECHNOLOGY CO., LTD. Crystal Unit SMD 7.5x5.0 16.8MHz MODEL NO.: TZ1864A REV. NO.: 1 Revise: Rev. Rev. Page Rev. Account Date 1 N/A 06/12/13’ N/A Initial release TAI-SAW TECHNOLOGY CO., LTD. Ref. No. Revised by Yifan Chen TST DCC Release document 3/7 TAI-SAW TECHNOLOGY CO., LTD. Crystal Unit SMD 7.0x5.0 16.8MHz MODEL NO.: TZ1864A REV. NO.: 1 Features: z z Surface Mount Seam Weld Package Good Frequency Perturbation and Stability over temperature RoHS Compliant Lead free Lead-free soldering Description and Applications: Surface mount 7.0x5.0 mm crystal unit for customer Electrical Specifications: TZ1864A Specification Nominal Frequency 16.800000 MHz Mode of Oscillation Fundamental Storage Temperature Range -40°C to +100°C Operating Temperature Range -30°C to +85°C Frequency Stability over Operating Temperature Range +/-15 ppm (referred to the value at 25°C) Frequency Make Tolerance (FL) +/-10 ppm @ 25°C +/- 3°C Equivalent Series Resistance (ESR) 25Ω max. Nominal Drive Level 150 uW typ. Shunt Capacitance (Co) 7.0 pF MAX Load Capacitance (CL) 20pF Aging ±1.0 ppm/year, ±5.0ppm/10year Insulation Resistance 500 MΩ min./DC 100V Marking Laser marking Pullability{(FL-FS/FS)} FL is the resonant frequency with a load of 20pF 175 to 250ppm TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 4/7 Mechanical Dimensions (mm): #1 pin #2 pin #3 pin #4 pin Pin Connection IN/OUT GND IN/OUT GND Marking: The 8-digit code shall be converted to a Data Matrix format readable by the readers used in customer production process. The last four digits will represent the date code; i.e. XXXXXXXX5049825 implies year 1998 week 25th. The remaining 9 digits may be used by the vendor for codes to track other factory specific details such as assembly line, lot number, tray number, and day/time codes. The Data Matrix must be the only marking present, and i t m u s t b e c e n t e r e d , v e r t i c a l l y a n d h o r i z o n t a l l y, o n t h e t o p o f t h e p a c k a g e . 5x7 Surface Mount Package sample Laser etched 2D Bar code- 16x16 Data Matrix symbol The inner 14 rows and columns will be filled with dark and light square cells according to ECC200 format. TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 5/7 Reel Dimensions (mm): Tape Dimensions (mm): Pin #1/Data Matrix Reference Corner [NOTE]: 1. Unless otherwise specified tolerance on dimension +/-0.1 mm. 2. Material: conductive polystyrene with color black 3. 10 pitch cumulative tolerance +/-0.2 mm. TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 6/7 Packing Quantity/Packing: 1K pcs maximum per reel Reflow Profile: 300 Reflow Area Temperature (deg C) Rising Area Preheat Area Forced Cooling Area 250 200 150 100 Max peak temperature: 260 deg C 50 0 0 60 120 180 240 300 Time (seconds) Note: 1.Max peak temperature: 260+/-5 deg C; Time: 10+/-2 sec 2. Temperature: 217+/-5 deg C; Time: 90~100 sec TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 360 7/7 Reliability Specifications Test name Reference standard Test process / method Mechanical characteristics resistance to Soldering heat (IR reflow) Temp./ Duration : 260°C /10sec ×2 times Total time : 4min.(IR-reflow) Vibration Total peak amplitude : 1.5mm Vibration frequency : 10 to 55 Hz Sweep period : 1.0 minute Vibration directions : 3 mutually perpendicular Duration : 2 hr / direc. directions : 3 impacts per axis Acceleration : 3000g's, +20/-0 % Duration : 0.3 ms (total 18 shocks) Waveform : Half-sine Solder Temperature:265±5°C Duration time: 5±0.5 seconds. Mechanical Shock Solderability EIAJED-4701 -300(301)M(II) MIL-STD 202F method 201A MIL-STD 202F method 213C MIL-STD 883G method 2003 Environmental characteristics Thermal Shock Humidity test Dry heat ( Aging test ) PCT test Heat cycle conditions -55 ℃ (30min) ←→ * cycle time : 10 times 125 ℃ (30min) Temperature : 70 ± 2 °C Relative humidity : 90~95% Duration : 96 hours Temperature : 125 ± 2 °C Duration : 168 hours 2 MIL-STD 883G method 1010.7 MIL-STD 202F method 103B 5 Pressure: 2.06kg/cm (2.03*10 pa) Temperature : 121 ± 2 °C Relative humidity : 100% Duration : 24 hours TAI-SAW TECHNOLOGY CO., LTD. MIL-STD 883G method 1008.2 condition C EIAJED-4701-3 B-123A TST DCC Release document