1/7 TAI-SAW TECHNOLOGY CO., LTD. No. 3, Industrial 2nd Rd., Ping-Chen Industrial District, Taoyuan, 324, Taiwan, R.O.C. TEL: 886-3-4690038 FAX: 886-3-4697532 E-mail: [email protected] Web: www.taisaw.com Product Specifications Approval Sheet Product Description: Crystal Unit SMD 2.0x1.6 16.0MHz TST Part No.: TZ2761A Customer Part No.: Customer signature required Company: Division: Approved by : Date: Checked by: Derick Lin Approved by: Kelly Huang Date: 12/23/2013 1. Customer signed back is required before TST can proceed with sample build and receive orders. 2. Orders received without customer signed back will be regarded as agreement on the specifications. 3. Any specifications changes must be approved upon by both parties and a new revision of specifications shall be released to reflect the changes. TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document FR-71S03-02 2/7 TAI-SAW TECHNOLOGY CO., LTD. Crystal Unit SMD 2.0x1.6 16.0MHz MODEL NO.: TZ2761A REV. NO.: 1 Revise: Rev. Rev. Page Rev. Account Date 1 N/A 12/23/13’ N/A Initial release TAI-SAW TECHNOLOGY CO., LTD. Ref. No. Revised by Derick Lin 3/7 TAI-SAW TECHNOLOGY CO., LTD. Crystal Unit SMD 2.0x1.6 16.0MHz MODEL NO.: TZ2761A REV. NO.: 1 Features: Surface Mount Hermetic Package Excellent Reliability Performance Good Frequency Perturbation and Stability over temperature Ultra Miniature Package RoHS Compliant Lead free Lead-free soldering Description and Applications: Surface mount 2.0mmx1.6mm crystal unit for use in wireless communications devices, especially for a need of ultra miniature package for mobility. Electrical Specifications: TZ2761A Specification Nominal Frequency 16.000000 MHz Mode of Oscillation Fundamental Storage Temperature Range -40C to +90C Operating Temperature Range -20C to +70C Frequency Stability over Operating Temperature Range +/-10 ppm (referred to the value at 25C) Frequency Make Tolerance (FL) +/-10 ppm @ 25C +/- 3C Equivalent Series Resistance (ESR) 100 max Nominal Drive Level 10uW typical and 100uW max Shunt Capacitance (Co) 5.0 pF max Load Capacitance (CL) 8 pF Insulation Resistance 500 M min./DC 100V Marking Laser Marking Unit Weight 5.7mg+/-0.5mg TAI-SAW TECHNOLOGY CO., LTD. 4/7 Mechanical Dimensions (mm): Recommended Land Pattern: (unit: mm) Marking: Line 1: XX; Frequency (16) Line 2: T; Traceable Code + D; date Code of Year/Month TAI-SAW TECHNOLOGY CO., LTD. 5/7 Date Code Table: Year/Month Year/Month 1 2 3 4 5 6 7 8 9 10 11 12 2009 n p q r s t u v w x y z 2010 A B C D E F G H J K L M 2011 N P Q R S T U V W X Y Z 2012 a b c d e f g h i j k m 2013 n p q r s t u v w x y z 2014 A B C D E F G H J K L M 2015 N P Q R S T U V W X Y Z 2016 a b c d e f g h i j k m 2017 n p q r s t u v w x y z 2018 A B C D E F G H J K L M 2019 N P Q R S T U V W X Y Z 2020 a b c d e f g h i j k m 2021 n p q r s t u v w x y z Reel Dimensions (mm): Tape Dimensions (mm): Direction of Feed TAI-SAW TECHNOLOGY CO., LTD. 6/7 [NOTE]: 1. Unless otherwise specified tolerance on dimension +/-0.1 mm. 2. Material: conductive polystyrene with color black. 3. 10 pitch cumulative tolerance +/-0.2 mm. Packing Quantity/Packing: 3K pcs maximum per reel Reflow Profile: Note: 1.Max peak temperature: 260+/-5 deg C; Time: 10+/-2 sec 2. Temperature: 217+/-5 deg C; Time: 90~100 sec TAI-SAW TECHNOLOGY CO., LTD. 7/7 Reliability Specifications Test name Test process / method Reference standard Mechanical characteristics resistance to Soldering heat (IR reflow) Temp./ Duration : 260°C /10sec ×2 times Total time : 4min.(IR-reflow) Vibration Total peak amplitude : 1.5mm Vibration frequency : 10 to 55 Hz Sweep period : 1.0 minute Vibration directions : 3 mutually perpendicular Duration : 2 hr / direc. directions : 3 impacts per axis Acceleration : 3000g's, +20/-0 % Duration : 0.3 ms (total 18 shocks) Waveform : Half-sine Solder Temperature:265±5°C Duration time: 5±0.5 seconds. Mechanical Shock Solderability EIAJED-4701 -300(301)M(II) MIL-STD 202F method 201A MIL-STD 202F method 213C MIL-STD 883G method 2003 Environmental characteristics Thermal Shock Humidity test Dry heat ( Aging test ) PCT test Heat cycle conditions -55 ℃ (30min) ←→ * cycle time : 10 times 125 ℃ (30min) Temperature : 70 ± 2 °C Relative humidity : 90~95% Duration : 96 hours Temperature : 125 ± 2 °C Duration : 168 hours 2 MIL-STD 883G method 1010.7 MIL-STD 202F method 103B 5 Pressure: 2.06kg/cm (2.03*10 pa) Temperature : 121 ± 2 °C Relative humidity : 100% Duration : 24 hours TAI-SAW TECHNOLOGY CO., LTD. MIL-STD 883G method 1008.2 condition C EIAJED-4701-3 B-123A