EL7232 ® Data Sheet April 11, 2005 Dual Channel, High Speed, High Current Line Driver w/3-State The EL7232 3-state drivers are particularly well suited for ATE and microprocessor based applications. The low quiescent power dissipation makes this part attractive in battery applications. The 2A peak drive capability, makes the EL7232 an excellent choice when driving high speed capacitive lines, as well. The input circuitry provides level shifting from TTL levels to the supply rails. The EL7232 is available in 8-pin PDIP and 8-lead SO packages. FN7283.1 Features • 3-State output • 3V and 5V input compatible • Clocking speeds up to 10MHz • 20ns Switching/delay time • 2A Peak drive • Low, matched output impedance—5Ω • Low quiescent current — 2.5mA • Wide operating voltage — 4.5V-16V Ordering Information • Pb-Free available (RoHS compliant) PART NUMBER PACKAGE TAPE & REEL EL7232CN 8-Pin PDIP - MDP0031 • Parallel bus line drivers EL7232CS 8-Pin SO - MDP0027 • EPROM and PROM programming EL7232CS-T7 8-Pin SO 7” MDP0027 • Motor controls EL7232CS-T13 8-Pin SO 13” MDP0027 EL7232CSZ (See Note) 8-Pin SO (Pb-free) - MDP0027 EL7232CSZ-T7 (See Note) 8-Pin SO (Pb-free) 7” MDP0027 EL7232CSZ-T13 (See Note) 8-Pin SO (Pb-free) 13” MDP0027 PKG. DWG. # Applications • Charge pumps • Sampling circuits • Pin drivers • Bridge circuits Pinout EL7232 (8-PIN PDIP, SO) TOP VIEW NOTE: Intersil Pb-free products employ special Pb-free material sets; molding compounds/die attach materials and 100% matte tin plate termination finish, which are RoHS compliant and compatible with both SnPb and Pb-free soldering operations. Intersil Pb-free products are MSL classified at Pb-free peak reflow temperatures that meet or exceed the Pb-free requirements of IPC/JEDEC J STD-020. Manufactured under U.S. Patent Nos. 5,334,883, #5,341,047 Truth Table 1 3-STATE INPUT OUTPUT 1 0 1 1 1 0 0 0 Open 0 1 Open CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures. 1-888-INTERSIL or 1-888-352-6832 | Intersil (and design) is a registered trademark of Intersil Americas Inc. Copyright Intersil Americas Inc. 2003, 2005. All Rights Reserved All other trademarks mentioned are the property of their respective owners. EL7232 Absolute Maximum Ratings (TA = 25°C) Operating Junction Temperature . . . . . . . . . . . . . . . . . . . . . . . 125°C Power Dissipation SOIC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .570mW PDIP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1050mW Supply (V+ to Gnd) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16.5V Input Pins . . . . . . . . . . . . . . . . . . . . . . . . . . -0.3V to +0.3V above V+ Combined Peak Output Current. . . . . . . . . . . . . . . . . . . . . . . . . . .4A Storage Temperature Range . . . . . . . . . . . . . . . . . .-65°C to +150°C Ambient Operating Temperature . . . . . . . . . . . . . . . .-40°C to +85°C CAUTION: Stresses above those listed in “Absolute Maximum Ratings” may cause permanent damage to the device. This is a stress only rating and operation of the device at these or any other conditions above those indicated in the operational sections of this specification is not implied. IMPORTANT NOTE: All parameters having Min/Max specifications are guaranteed. Typical values are for information purposes only. Unless otherwise noted, all tests are at the specified temperature and are pulsed tests, therefore: TJ = TC = TA DC Electrical Specifications PARAMETER TA = 25°C, V = 15V unless otherwise specified DESCRIPTION TEST CONDITIONS MIN TYP MAX UNITS INPUT VIH Logic “1” Input Voltage IIH Logic “1” Input Current VIL Logic “0” Input Voltage IIL Logic “0” Input Current VHVS Input Hysteresis 2.4 @V+ V 0.1 @0V 0.1 10 µA 0.8 V 10 µA 0.3 V OUTPUT ROH Pull-Up Resistance IOUT = -100 mA 3 6 Ω ROL Pull-Down Resistance IOUT = +100 mA 4 6 Ω IOFF 3-State Output Leakage VOUT = V+ VOUT = 0V 10 µA IPK Peak Output Current Source Sink IDC Continuous Output Current Source/Sink 0.2 2.0 2.0 A 100 mA POWER SUPPLY IS Power Supply Current VS Operating Voltage AC Electrical Specifications PARAMETER Inputs High 1 4.5 2.5 mA 16 V MAX UNITS TA = 25°C, V = 15V unless otherwise specified DESCRIPTION TEST CONDITIONS MIN TYP SWITCHING CHARACTERISTICS tR Rise Time CL = 500pF CL = 1000pF 7.5 10 tF Fall Time CL = 500pF CL = 1000pF 10 13 20 ns ns tD-ON Turn-On Delay Time 18 25 ns tD-OFF Turn-Off Delay Time 20 25 ns 2 EL7232 Timing Table Standard Test Configuration Simplified Schematic 3 EL7232 Typical Performance Curves Max Power/Derating Curves Input Current vs Voltage Quiescent Supply Current 4 Switch Threshold vs Supply Voltage Peak Drive vs Supply Voltage “ON” Resistance vs Supply Voltage EL7232 Typical Performance Curves (Continued) Average Supply Current vs Voltage and Frequency Rise/Fall Time vs Load 5 Average Supply Current vs Capacitive Load Rise/Fall Time vs Supply Voltage EL7232 Typical Performance Curves (Continued) Rise/Fall Time vs Temperature Propagation Delay vs Supply Voltage Propagation Delay vs Temperature All Intersil U.S. products are manufactured, assembled and tested utilizing ISO9000 quality systems. Intersil Corporation’s quality certifications can be viewed at www.intersil.com/design/quality Intersil products are sold by description only. Intersil Corporation reserves the right to make changes in circuit design, software and/or specifications at any time without notice. Accordingly, the reader is cautioned to verify that data sheets are current before placing orders. Information furnished by Intersil is believed to be accurate and reliable. However, no responsibility is assumed by Intersil or its subsidiaries for its use; nor for any infringements of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of Intersil or its subsidiaries. For information regarding Intersil Corporation and its products, see www.intersil.com 6