For more information, please visit the product page. date 07/03/2012 page 1 of 3 MODEL: GF0506 │ DESCRIPTION: SPEAKER RoHS SPECIFICATIONS parameter conditions/description nominal size 50 min impedance at 0.8 kHz, 1 V 6.8 8 9.2 Ω resonant frequency at 1 V 344 430 516 Hz max units 82 mm sound pressure level 0.25 W, 50 cm ave., at 1, 1.4, 1.7, 2 kHz 79 response 10 dB max. Fo input power operation typ 0.25 85 dB 7,200 Hz 0.5 W must be normal at program source 0.25 W buzz, rattle, etc. must be normal at sine wave 1.41 Vdc magnet size: 32 x 18 x 6 mm load test 24 hours of white noise at heat test 20 ~ 50% RH for 24 hours 68 70 72 °C humidity test 90 ~ 95% RH for 24 hours 38 40 42 °C RoHS yes 0.25 FREQUENCY RESPONSE CURVE parameter conditions/description potentiometer range 50 dB rectifier RMS lower limit frequency 20 Hz wr. speed 100 mm/sec zero level 60 dB cui.com W For more information, please visit the product page. CUI Inc │ MODEL: GF0506 │ DESCRIPTION: SPEAKER date 07/03/2012 │ page 2 of 3 MECHANICAL DRAWING units: mm tolerance: ±0.5 mm 45.00 32.00 17.50 2.50 50.00 4.00 (4 PLCS) + 56.50 cui.com For more information, please visit the product page. CUI Inc │ MODEL: GF0506 │ DESCRIPTION: SPEAKER date 07/03/2012 │ page 3 of 3 REVISION HISTORY rev. description date 1.0 initial release 03/04/2009 1.01 new template applied, height changed from 18 to 17.5 mm, resonant frequency, and SPL changed 07/03/2012 The revision history provided is for informational purposes only and is believed to be accurate. Headquarters 20050 SW 112th Ave. Tualatin, OR 97062 800.275.4899 Fax 503.612.2383 cui.com email@example.com CUI offers a one (1) year limited warranty. Complete warranty information is listed on our website. CUI reserves the right to make changes to the product at any time without notice. Information provided by CUI is believed to be accurate and reliable. However, no responsibility is assumed by CUI for its use, nor for any infringements of patents or other rights of third parties which may result from its use. CUI products are not authorized or warranted for use as critical components in equipment that requires an extremely high level of reliability. A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness.