Series ECO www.vishay.com Vishay Sfernice Precision Rotative Transducers, Conductive Plastic, Economic Series (ECO) FEATURES • Size 05 - 09 - 13 are available • Long life up to 30 million cycles RoHS • Accuracy ± 1 % down to ± 0.25 % COMPLIANT • Bush or servo mounting types • Rear mounted terminals • Following MIL-R-39023 and NFC 93-255 requirements • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 QUICK REFERENCE DATA The “ECO” models are a comprehensive range of rational motion transducers for industrial applications. Sensor type ROTATIONAL, conductive plastic Output type Output by turrets Market appliance Industrial Dimensions Various sizes All mechanical and electrical parameters can be adapted to meet your specifications. SIZE MODEL 05 50 ES 09 50 CB 78 ES 13 78 CS 78 CB 156 ES 156 CS 156 CB ELECTRICAL SPECIFICATIONS Theoretical electrical angle (TEA) Actual electrical angle (AEA) - 2° Independent linearity (over TEA) A±1% (standard) Actual electrical angle (AEA) 330° ± 5° Ohmic values (RT) Ohmic value tolerances at 20 °C C ± 0.25 % (special) 340° ± 5° 350° ± 5° 1 k - 5 k - 10 k - on request other values ± 10 % ± 20 % ± 10 % ± 20 % ± 10 % ± 20 % 0.05 % Output smoothness Maximum power rating at 70 °C 0.2 W 0.3 W Wiper current 0.5 W Recommended: a few μA - 1 mA max. (continuous) Tap (current or voltage) NA 1 (on request) Resistance load on wiper End voltage B ± 0.5 % (special) Minimum 0.2 % 0.5 % 0.2 % 103 x RT 0.5 % 0.2 % 0.5 % 1000 M, 500 VDC Insulation resistance 500 VRMS, 50 Hz Dielectric strength MECHANICAL SPECIFICATIONS Mechanical angle (MA) On request: stops Mounting type Shaft guiding Shaft Housing Termination Wiper Starting torque (N.cm) Torque on stops (N.cm) Weight (g) Moment of inertia (g cm2) Revision: 26-Mar-15 NA Servo Ball bearings Bushing Sleeve bearings 0.2 0.5 5±2 8±2 0.5 360° continuous 340° ± 3° 350° ± 3° Servo Bushing Servo Bushing Ball Sleeve Ball Sleeve bearings bearings bearings bearings Stainless steel Plastic moulding Turrets Precious metal multi-finger contact 0.2 0.5 0.2 0.5 50 13 ± 2 17 ± 2 29 ± 2 34 ± 2 1 2 Document Number: 54007 1 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Series ECO www.vishay.com Vishay Sfernice PERFORMANCE Life (106 cycles) 30 (on ES models) 20 (on CS and CB models) Temperature range -55 °C to +125 °C Climatic category 55/125/04 Speed rotation (RPM) 600 (on ES models) Sine vibration on 3 axes 150 (on CS and CB models) 1.5 mm or 20 g from 10 Hz to 2000 Hz Mechanical shocks on 3 axes 50 g - 11 ms - half sine Note • Nothing stated herein shall be construed as a guarantee of quality or durability. DIMENSIONS in millimeters, general tolerance ± 0.5 mm T 0.05 G SIZE 05/09/13 0.05 X H X SERVO MOUNT TYPE -0 50 ES 78 ES 78 CS 156 ES 156 CS Ø 3.175 - 0.013 +0 ØA Ø C - 0.025 0.4 x 45 X Ø D MAX. F 12 7 ± 0.8 DIMENSIONS ØA B ØC Ø D max. F G H I max. DESIGNATION Ø housing Length Ø pilot Ø groove Flange thickness Shoulder Dia. of groove Height of the turret SIZE 05 50 ES 12.7 13.0 9.525 11.45 1 ± 0.1 1.2 ± 0.1 1.2 ± 0.2 2.5 B I SIZE 09 78 ES SIZE 13 78 CS 156 ES 22.2 13.5 19.05 19.64 156 CS 33.3 18.0 30.16 30.9 1.6 ± 0.1 1.6 ± 0.1 1.5 min. 2.5 3.6 10.3 ± 0.13 -0 Ø 3.175 - 0.013 SIZE 05/09/13 BUSHING MOUNT TYPE 50 CB 78 CB 156 CB Ø 9.52 x 0.79 ØA Ø 5.1 MAX. 0.4 x 45 1 1.6 9.6 MAX. 22.2 MAX. DIMENSIONS ØA B max. C max. DESIGNATION Ø housing Length Height of the turret Revision: 26-Mar-15 SIZE 05 50 CB 12.7 11 2.5 B MAX. C SIZE 09 78 CB 22.2 11.5 2.5 SIZE 13 156 CB 33.3 16 3.6 Document Number: 54007 2 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Series ECO www.vishay.com Vishay Sfernice DIMENSIONS in millimeters, general tolerance ± 0.5 mm SIZE 13 SIZE 09 SIZE 05 45° ± 45° ° 45° ±5 ° ±5 ° R = 3.7 1 2 3 45° ± 5 5° 1 3 3 1 CW 2 2 R = 4.8 R = 4.8 4 R = 11 4 INTERMEDIATE TAP ON REQUEST 45° 45 ° ±5 °± 1 3.5 MAX. 5° 3 4 INTERMEDIATE TAP ON REQUEST 2 ORDERING INFORMATION/DESCRIPTION ECO 78 E S A T 103 e4 SERIES MODEL TYPE FIXATION LINEARITY CODE TAP OHMIC VALUE LEAD FINISH On request T: Voltage U: Current position to be specified First 2 digits are significant numbers 3rd digit indicates number of zeros E = Ball bearings C = Sleeve bearings S: Servo B: Bushing A: ± 1 % B: ± 0.5 % C: ± 0.25 % Special characteristics and designs on request SAP PART NUMBERING GUIDELINES ECO 78CB C 502 SERIES MODEL LINEARITY OHMIC VALUE Revision: 26-Mar-15 Document Number: 54007 3 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000