Series REC 110 L www.vishay.com Vishay Sfernice Precision Linear Transducers, Conductive Plastic, up to 450 mm FEATURES • Large measurement range • High accuracy ± 1 % down to ± 0.05 % • Essentially infinite resolution • Easy mounting • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 QUICK REFERENCE DATA The 110 L is a compact, robust, easily mounted precision industrial motion transducer. Sensor type Output type Market appliance Dimensions LINEAR, conductive plastic Connector Industrial L x 18 mm x 41 mm (with L = TET + 47 mm) ELECTRICAL SPECIFICATIONS Theoretical electrical travel (TET) = E Independent linearity (over TET) on request Actual electrical travel (AET) 25 mm to 450 mm in increments of 25 mm ± 1 % ± 0.1 % ± 0.05 % for E 100 mm See electrical connections table 1 0.01 % Repeatability Ohmic values (RT) From 400 /cm to 2 k/cm Resistance tolerance at 20 °C Maximum power rating Wiper current ± 20 % 0.05 W/cm at 70 °C, 0 W at 125 °C Recommended: a few μA - 1 mA max. (continuous) Minimum 103 x RT Load resistance Insulation resistance 1000 M, 500 VDC 750 VRMS, 50 Hz Dielectric strength MECHANICAL SPECIFICATIONS Mechanical travel TET + 6 mm min. Housing Anodized aluminum Operating force 5 N typical Shaft (free rotation) Termination on request Wiper Stainless steel Connector: 723 series by cable Precious metal multifinger Mounting Movable brackets PERFORMANCE Operating life 40 million cycles typical/1 Hz/T° = 20 °C ± 5 °C/80 % TET Temperature range Mechanical shocks on 3 axes Sine vibration on 3 axes Speed (max.) -55 °C to +125 °C 50 g - 11 ms - half sine 1.5 mm peak to peak or 15 g - 10 Hz - 2000 Hz 8 m/s for f < 2 Hz; 3 m/s for f < 5 Hz Note • Nothing stated herein shall be construed as a guarantee of quality or durability. Revision: 26-Mar-15 Document Number: 54012 1 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Series REC 110 L www.vishay.com Vishay Sfernice DIMENSIONS in millimeters, general tolerance ± 1 mm STANDARD MODEL 3.8 41 23 M5 7 A 10 4 HOLES Ø 4.2 SETTING AREA: D = TET + 35 18 26 TET + 47 28.8 ± 0.2 45 VIEW A WITH CABLE OUTPUT: W04029 7 26.5 CABLE OUTPUT 3 WIRES AWG24 LENGTH 300 mm MIN. A 4 HOLES Ø 4.2 M5 3.8 18 28.8 ± 0.2 SETTING AREA: D = TET + 35 45 TET + 47 26 VIEW A ELECTRICAL CONNECTIONS PIN 3: + BLUE WIRE: + PIN 2: WIPER RED WIRE: WIPER PIN 1: - WHITE WIRE: TET TET AET AET MT MT TET = THEORETICAL ELECTRICAL TRAVEL AET = Actual ELECTRICAL TRAVEL MT = MECHANICAL TRAVEL TABLE 1 THEORETICAL ELECTRICAL TRAVEL TET ACTUAL ELECTRICAL TRAVEL AET TOLERANCE From 25 mm to 275 mm TET + 1 mm ± 0.5 mm From 300 mm to 450 mm TET + 1 mm ± 0.8 mm Revision: 26-Mar-15 Document Number: 54012 2 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Series REC 110 L www.vishay.com Vishay Sfernice OPTION: SPRING LOADED SHAFT DIMENSIONS in millimeters, general tolerance ± 1 mm 110L WITH SPRING LOADED SHAFT: W04030 3.8 A SETTING AREA: D = TET + 35 TET + 47 7 41 23 4 HOLES Ø 4.2 18 7 10 X 28.8 ± 0.2 45 VIEW A TABLE 2 MODEL X 110 L1 75 110 L2 112 110 L3 150 110 L4 188 110L WITH CABLE OUTPUT AND SPRING LOADED SHAFT: W04031 7 26.5 CABLE OUTPUT 3 WIRES AWG24 LENGTH 300 mm MIN. 3.8 4 HOLES Ø 4.2 A 18 28.8 ± 0.2 45 SETTING AREA: D = TET + 35 TET + 47 7 X VIEW A Revision: 26-Mar-15 Document Number: 54012 3 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Series REC 110 L www.vishay.com Vishay Sfernice ACCESSORIES ON REQUEST DIMENSIONS in millimeters, general tolerance ± 1 mm 1) FEMALE CONNECTOR Vishay’s Reference: 328870 58 MAX. 2) SPECIAL BALL JOINT Vishay’s reference: 323654 RADIAL CLEARANCE IN X AND Y ± 1.2 mm 56 MAX. ANGULAR CLEARANCE ± 15° M5 8 MAX. X CLEARANCE 3 ORDERING INFORMATION/DESCRIPTION REC 110 L 3 D 103 W... e. SERIES MODEL NUMBER OF TRACKS THEORETICAL ELECTRICAL TRAVEL LINEARITY OHMIC VALUE MODIFICATIONS LEAD FINISH L = 1 track Times 25 mm First 2 digits are significant numbers 3rd digit indicates number of zeros Special feature code number A: ± 1 % D: ± 0.1 % E: ± 0.05 % SAP PART NUMBERING GUIDELINES RE 110 L 3 D 103 W... SERIES MODEL TET LINEARITY OHMIC VALUE SPECIAL FEATURES Revision: 26-Mar-15 Document Number: 54012 4 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000