Model 25 www.vishay.com Vishay Spectrol Model 25 (PR1) 46 mm Diameter, 20 Turn Dial FEATURES • Large package size • For use with precision potentiometers or other devices, up to 20 turns RoHS COMPLIANT • Excellent readability • Precision feel - no backlash • Cast housing QUICK REFERENCE DATA Sensor type Market appliance Dimensions • Material categorization: For definitions of compliance please see www.vishay.com/doc?99912 DIALS Industrial 46 mm diameter MECHANICAL SPECIFICATIONS Accepts Shaft Diameter Number of Turns Dial Division Torque with Brake Engaged Markings Weight Set Srew Hex Key Size Bushing Extension Beyond Panel 6.35 mm (0.250")/6 mm/3.17 (0.125")/3 mm 0 to 20 100 per turn 5 oz. - in (350 g - cm) min. Black on satin chrome 75 g UNC 4-40 1.27 mm (0.05") 6.35 mm (0.250") max. 18.1 mm (0.710") min. 22.5 mm (0.925") max. Shaft Extension Beyond Panel DIMENSIONS in millimeters (inches) Ø 10.36 mm (0.41") Ø 14.30 mm (0.562") Ø 3.17 mm (0.125") Using the existing Antirotation Lug EASY REMOVABLE WITH PLIERS 1. Drill 3.2 mm (0.125) diameter antirotation pin hole on vertical centerline 14.3 mm (0.562) below center of potentiometer mounting hole. 2. Mount potentiometer shaft counterclockwise to obtain minimum resistance or voltage ratio. This is not necessarily identical with the mechanical stop. 4. Loosen set screws in knob of dial. Set dial. Set dial to “0.0” reading. 5. While holding outer ring of dial, position unit lightly against panel. Tighten knob set screws to potentiometer shaft. Using the Antirotation Device 1. Remove antirotation lug from dial by using pliers. 2. Mount potentiometer in panel with antirotation device nut (supplied with dial) and lockwasher (supplied with potentiometer). 3. Turn potentiometer shaft counterclockwise to obtain minimum resistance or voltage ratio. This is not necessaryly identical with the mechanical stop. 4. Loosen screws in knob of dial. Set dial to “0.0” reading. 5. While holding outer ring of dial, position unit lightly against panel. Tighten knob set screws to potentiometer shaft. PANEL HOLE PATTERN ORDERING INFORMATION/DESCRIPTION 25 A 11 B010 e MODEL SHAFT DIAMETER ACCOMMODATION AND FIXINGS FINISH PACKAGING LEAD FINISH Example: 25 - A - 11 A 1/4" dia. shaft - 1set screw B 6 mm metric bore - 1 set screw C 1/8" dia. shaft -1 set screw D 3 mm metric bore - 1 set screw 11 Satin chrome, black markings (standard) 21 Black chrome, white markings 41 Satin chrome, white markings SAP PART NUMBERING GUIDELINES 25 A 11 B10 MODEL SHAFT DIAMETER FINISH PACKAGING Revision: 06-Aug-12 Document Number: 57079 1 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000