40HF(R) Series STANDARD RECOVERY DIODES 40 AMP High-reliability discrete products and engineering services since 1977 FEATURES Available as “HR” (high reliability) screened per MIL-PRF-19500, JANTX level. Add “HR” suffix to base part number. Available as non-RoHS (Sn/Pb plating), standard, and as RoHS by adding “-PBF” suffix. MAXIMUM RATINGS Parameter Symbol Maximum average forward current Test Conditions IF(AV) Maximum RMS forward current 40HF(R) 10 to 120 140 to 160 40 @ TC = 140°C 40 @ TC = 110°C IF(RMS) Maximum peak, on cycle, non-repetitive forward surge current Maximum I2t for fusing Maximum repetitive peak reverse voltage Junction temperature range Units Amps 62 Amps IFSM @ 50Hz @ 60Hz 570 595 Amps I2t @ 50Hz @ 60Hz 1600 1450 A2s VRRM 100-1200 1400-1600 Volts TJ -65 to +190 -65 to +160 °C ELECTRICAL CHARACTERSITICS (TA = 25°C unless otherwise specified) Maximum repetitive peak reverse voltage Maximum non-repetitive peak reverse voltage Maximum reverse current at TJ = TJ maximum VRRM VRSM IRRM Volts Volts mA 40HF10(R) 100 200 40HF20(R) 200 300 40HF40(R) 400 500 40HF60(R) 600 700 Part number 40HF80(R) 800 900 40HF100(R) 1000 1100 40HF120(R) 1200 1300 40HF140(R) 1400 1500 40HF160(R) 1600 1700 9 4.5 Rev. 20150306 40HF(R) Series STANDARD RECOVERY DIODES 40 AMP High-reliability discrete products and engineering services since 1977 FORWARD CONDUCTION Parameter 40HF(R) Symbol Test Conditions Maximum average forward current at case temperature IF(AV) 180° conduction, half sine wave Maximum RMS forward current IF(RMS) Maximum peak, one cycle, non-repetitive forward surge current t= 8.3ms t= 10ms t= 8.3ms Maximum I2t for fusing t= 10ms 2 It t= 8.3ms t= 10ms t= 8.3ms Maximum I2√t for fusing Value of threshold voltage (up to 1200V) Value of threshold voltage (up to 1400V, 1600V) Value of forward slope resistance (up to 1200V) Value of forward slope resistance (up to 1400V, 1600V) Maximum forward voltage drop 140 to 160 40 @ TC = 140°C 40 @ TC = 110°C Units Amps 62 t= 10ms IFSM 10 to 120 No voltage reapplied 100% VRRM reapplied No voltage reapplied 100% VRRM reapplied 570 Sinusoidal half wave, initial T J = TJ maximum 595 Amps 480 500 1600 Sinusoidal half wave, initial TJ = TJ maximum 1450 A2s 1150 1050 I2√t T = 0.1ms to 10ms, no voltage reapplied VF(TO) TJ = TJ maximum rf1 TJ = TJ maximum VFM Ipk = 125A, TJ = 25°C, tp = 400µs rectangular wave A2√s 16000 0.65 Volts 0.76 4.29 mΩ 3.8 1.30 1.50 Volts -65 to 190 -65 to 160 °C THERMAL CHARACTERISTICS Maximum junction and storage temperature range Maximum thermal resistance, junction to case Thermal resistance, case to heatsink Maximum allowable mounting torque (+0%, -10%) TJ, Tstg RthJC DC operation 0.95 K/W RthCS Mounting surface, smooth, flat and greased 0.25 K/W Not lubricated thread, tighting on nut Lubricated thread, tighting on nut (1) (1) Not lubricated thread, tighting on hexagon (2) Lubricated thread, tighting on hexagon (2) 3.4 (30) 2.3 (20) 4.2 (37) N-m (lbf-in) 3.2 (28) Note 1: Recommended for pass through-holes. Note 2: Recommended for holed threaded heatsinks. Rev. 20150306 High-reliability discrete products and engineering services since 1977 40HF(R) Series STANDARD RECOVERY DIODES 40 AMP ∆RthJC Conduction Conduction angle Sinusoidal conduction Rectangular conduction 180° 0.14 0.10 120° 0.16 0.17 90° 0.21 0.22 60° 0.30 0.31 30° 0.50 0.50 Test conditions Units TJ = TJ maximum K/W *The table above shows the increment of thermal resistance RthJC when devices operate at different conduction angles than DC MECHANICAL CHARACTERISTICS Case DO-5 (R) Marking Alpha numeric Polarity Cathode is stud Reverse polarity Anode is stud DO-5(R) A B C D E F G H J K M N P Inches Millimeters Min Max Min Max ¼-28 UNF2A threads 0.669 0.688 16.990 17.480 0.794 20.160 1.000 25.400 0.422 0.453 10.720 11.510 0115 0.200 2.920 5.080 0.450 11.430 0.220 0.249 5.580 6.320 0.250 0.375 6.350 9.530 0.156 3.960 0.667 16.940 0.030 0.080 0.760 2.030 0.140 0.175 3.560 4.450 Rev. 20150306 High-reliability discrete products and engineering services since 1977 40HF(R) Series STANDARD RECOVERY DIODES 40 AMP Rev. 20150306 High-reliability discrete products and engineering services since 1977 40HF(R) Series STANDARD RECOVERY DIODES 40 AMP Rev. 20150306 High-reliability discrete products and engineering services since 1977 40HF(R) Series STANDARD RECOVERY DIODES 40 AMP Rev. 20150306

- Similar pages
- 85HF R -Series.aspx?ext=