UNISONIC TECHNOLOGIES CO., LTD MGBR10L200 Preliminary DIODE MOS GATED BARRIER RECTIFIER DESCRIPTION The UTC MGBR10L200 is a surface mount mos gatedbarrier rectifier,it uses UTC’s advanced technology to provide customers withlow forward voltage drop and high switching speed, etc. FEATURES * Low forward voltage drop * High switching speed SYMBOL ORDERING INFORMATION Ordering Number Package Lead Free Halogen Free MGBR10L200L-TA3-T MGBR10L200G-TA3-T TO-220 MGBR10L200L-TF3-R MGBR10L200G-TF3-R TO-220F Note: Pin Assignment: A: Anode K: Common Cathode Pin Assignment 1 2 3 A K A A K A Packing Tube Tape Reel MARKING www.unisonic.com.tw Copyright © 2016 Unisonic Technologies Co., Ltd 1 of 3 QW-R204-077 .a MGBR10L200 Preliminary DIODE ABSOLUTE MAXIMUM RATINGS (TA=25°C, unless otherwise specified) Single phase, half wave, 60Hz, resistive or inductive load. For capacitance load,derate current by 20%. PARAMETER SYMBOL RATINGS UNIT DC Blocking Voltage VRM 200 V Working Peak Reverse Voltage VRWM 200 V Repetitive Peak Reverse Voltage VRRM 200 V Average Rectified Output Current IO 10 A Non-Repetitive Peak Forward Surge Current 8.3ms IFSM 180 A Single Half Sine-Wave Superimposed on Rated Load Operating Junction Temperature TJ -65 ~ +150 °C Storage Temperature TSTG -65 ~ +150 °C Note: Absolute maximum ratings are those values beyond which the device could be permanently damaged. Absolute maximum ratings are stress ratings only and functional device operation is not implied. THERMAL CHARACTERISTICS (PER LEG) PARAMETER Typical Thermal Resistance SYMBOL TO-220 TO-220F θJC RATINGS 2 4 UNIT °C/W °C/W ELECTRICAL CHARACTERISTICS (PER LEG) (TA=25°C,unless otherwise specified.) PARAMETER Reverse Breakdown Voltage SYMBOL V(BR)R TEST CONDITIONS IR=0.5mA IF=10A, TJ=25°C Instantaneous Forward Voltage VFM IF=10A, TJ=125°C VR=200V, TJ=25°C Leakage Current IRM VR=200V, TJ=125°C Note: Pulse Test: Pulse width ≤ 300µs, Duty cycle ≤ 2%. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw MIN 200 TYP MAX UNIT V 0.86 V 0.75 V 100 μA 10 mA 2 of 3 QW-R204-077 .a MGBR10L200 Preliminary DIODE UTC assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all UTC products described or contained herein. UTC products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 3 of 3 QW-R204-077 .a