UNISONIC TECHNOLOGIES CO., LTD MBR1060 Preliminary DIODE 10A SCHOTTKY BARRIER RECTIFIER DESCRIPTION The UTC MBR1060 is a 10A schottky barrier rectifier, it uses UTC’s advanced technology to provide the customers with high surge capability, high efficiency, high current capability, low power loss and low forward voltage drop, etc. The UTC MBR1060 is suitable for free wheeling and polarity protection, etc. FEATURES * Low Reverse Current * Low Stored Charge, Majority Carrier Conduction * Low Power Loss/High Efficiency * Highly Stable Oxide Passivated Junction SYMBOL ORDERING INFORMATION Ordering Number Lead Free Halogen Free MBR1060L-TA3-T MBR1060G-TA3-T MBR1060L-TF3-T MBR1060G-TF3-T Note: Pin Assignment: A: Anode K: Cathode Package TO-220 TO-220F Pin Assignment 1 2 3 A K A A K A Packing Tube Tube MARKING www.unisonic.com.tw Copyright © 2016 Unisonic Technologies Co., Ltd 1 of 3 QW-R202-058.a MBR1060 Preliminary DIODE ABSOLUTE MAXIMUM RATING (TA=25°C, unless otherwise specified) Ratings at 25°C ambient temperature unless otherwise specified. Single phase half-wave 60Hz, resistive or inductive load, for capacitive load current derate by 20%. PARAMETER SYMBOL RATINGS UNIT DC Blocking Voltage VR 60 V Working Peak Reverse Voltage VRWM 60 V Repetitive Peak Reverse Voltage VRRM 60 V Average Rectified Output Current (TA=105°C) IO 10 A Peak Forward Surge Current 8.3ms Single Half IFSM 150 A Sine-Wave Superimposed on Rated Load Junction Temperature TJ -55 ~ +150 °C Storage Temperature TSTG -55 ~ +150 °C Note: Absolute maximum ratings are those values beyond which the device could be permanently damaged. Absolute maximum ratings are stress ratings only and functional device operation is not implied. THERMAL CHARACTERISTICS (PER LEG) PARAMETER Typical Thermal Resistance SYMBOL TO-220 TO-220F θJC RATINGS 2 4 UNIT °C/W °C/W ELECTRICAL CHARACTERISTICS (PER LEG) PARAMETER Reverse Breakdown Voltage SYMBOL V(BR)R TEST CONDITIONS IR=0.50mA IF=10A, TC=25°C Instantaneous Forward Voltage Drop \ VFM IF=10A, TC=125°C Peak Reverse Current at Rated DC Rated DC Voltage, TC=25°C IRM Blocking Voltage Rated DC Voltage, TC=125°C Note: Pulse Test: Pulse width ≤ 300µs, Duty cycle ≤ 2%. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw MIN 60 TYP MAX UNIT V 0.80 V 0.75 100 μA 25 mA 2 of 3 QW-R202-058.a MBR1060 Preliminary DIODE UTC assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all UTC products described or contained herein. UTC products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 3 of 3 QW-R202-058.a