UNISONIC TECHNOLOGIES CO., LTD ESD5V0L1B Preliminary TVS DIODE ULTRA LOW CLAMPING BI-DIRECTIONAL ESD TRANSIENT PROTECTION DIODE 1 2 DESCRIPTION SOD-523 The UTC ESD5V0L1B is ultra-low clamping ESD transient bidirectional protection diode, it uses UTC’s advanced technology to provide customers with low leakage current and high integration, etc. The UTC ESD5V0L1B is suitable for ESD protection and high density boards. FEATURES * Bi-directional, symmetrical working voltage * Ultra low clamping voltage * Ultra low dynamic resistance FEATURES ORDERING INFORMATION Ordering Number ESD5V0L1BG-CC2-R Note: Pin Assignment: K: Cathode Package SOD-523 Pin Assignment 1 2 K K Packing Tape Reel ESD5V0L1BG-CC2-R (1)Packing Type (1) R: Tape Reel (2)Package Type (2) CC2 : SOT-523 (3)Green Package (3) G: Halogen Free and Lead Free MARKING www.unisonic.com.tw Copyright © 2016 Unisonic Technologies Co., Ltd 1 of 3 QW-R229-006 .a ESD5V0L1B Preliminary TVS DIODE ABSOLUTE MAXIMUM RATINGS (TA=25°C, unless otherwise specified) PARAMETER SYMBOL RATINGS UNIT ESD Discharge IEC61000-4-2 Contact Discharge VESD ±25 kV Peak Pulse current (tP=8/20 µs) IPP ±2.5 A Operating Junction Temperature TJ 125 °C Operating Temperature (Note 2) TOPR -55 ~ +125 °C Storage Temperature TSTG -65 ~ +150 °C Note: Absolute maximum ratings are those values beyond which the device could be permanently damaged. Absolute maximum ratings are stress ratings only and functional device operation is not implied. ELECTRICAL CHARACTERISTICS (TA=25°C, unless otherwise specified) PARAMETER Reverse working voltage Reverse current Line capacitance SYMBOL VRMW IR CL Clamping voltage VCL Dynamic resistance (Note 1) RDYN UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw TEST CONDITIONS VR=3.0V VR=0V. f=1MHz IPP=5A, tP=30ns IPP=5A, tP=30ns IPP=16A, tP=30ns IPP=16A, tP=30ns tP=30ns MIN -5.0 TYP <1 20 17 20 22 25 0.3 MAX 5.0 50 30 UNIT V nA pF V V V V Ω 2 of 3 QW-R229-006 .a ESD5V0L1B Preliminary TVS DIODE UTC assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all UTC products described or contained herein. UTC products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 3 of 3 QW-R229-006 .a