2N6660, 2N6660-2, 2N6660JANTX, 2N6660JANTXV www.vishay.com Vishay Siliconix N-Channel 60 V (D-S) MOSFET FEATURES PRODUCT SUMMARY VDS (V) 60 RDS(on) () at VGS = 10 V 3 Configuration • Military Qualified • • • • • Single TO-205AD (TO-39) BENEFITS • • • • • • S 1 2 Low On-Resistence: 1.3 Low Threshold: 1.7 V Low Input Capacitance: 35 pF Fast Switching Speed: 8 ns Low Input and Output Leakage APPLICATIONS 3 G Guaranteed Reliability Low Offset Voltage Low-Voltage Operation Easily Driven Without Buffer High-Speed Circuits Low Error Voltage • Hi-Rel Systems • Direct Logic-Level Interface: TTL/CMOS • Drivers: Relays, Solenoids, Lamps, Hammers, Displays, Memories, Transistors, etc. • Battery Operated Systems • Solid-State Relays D Top View ORDERING INFORMATION PART DESCRIPTION/DSCC PART NUMBER PACKAGE 2N6660 2N6660-2 2N6660JANTX VISHAY ORDERING PART NUMBER Commercial 2N6660 Commercial, Lead (Pb)-free 2N6660-E3 www.vishay.com/doc?67884 See -2 Flow Document 2N6660-2 JANTX2N6660 (std Au leads) 2N6660JTX02 TO-205AD (TO-39) 2N6660JANTXV JANTX2N6660 (with solder) 2N6660JTXL02 JANTX2N6660P (with PIND) 2N6660JTXP02 JANTXV2N6660 (std Au leads) 2N6660JTXV02 JANTXV2N6660P (with PIND) 2N6660JTVP02 ABSOLUTE MAXIMUM RATINGS (TA = 25 °C, unless otherwise noted) PARAMETER SYMBOL LIMIT Drain-Source Voltage VDS 60 Gate-Source Voltage VGS ± 20 Continuous Drain Current (TJ = 150 °C) Pulsed Drain TC = 25 °C TC = 100 °C Currenta Maximum Power Dissipation ID IDM TC = 25 °C TA = 25 °C PD UNIT V 0.99 0.62 A 3 6.25 W 0.725 Thermal Resistance, Junction-to-Ambientb RthJA 170 Thermal Resistance, Junction-to-Case RthJC 20 TJ, Tstg - 55 to 150 Operating Junction and Storage Temperature Range °C/W °C Notes a. Pulse width limited by maximum junction temperature. b. Not required by military spec. S11-1542-Rev. D, 01-Aug-11 1 Document Number: 70223 THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 2N6660, 2N6660-2, 2N6660JANTX, 2N6660JANTXV www.vishay.com Vishay Siliconix SPECIFICATIONS (TA = 25 °C, unless otherwise noted) LIMITS PARAMETER MIN. TYP.a SYMBOL TEST CONDITIONS MAX. VDS VDS = 0 V, ID = 10 μA 60 75 - VDS = VGS, ID = 1 mA 0.8 1.7 2 TC = - 55 °C - - 2.5 TC = 125 °C 0.3 - - - - ± 100 - - ± 500 - - 1 - - 100 UNIT Static Drain-Source Breakdown Voltage Gate-Source Threshold Voltage VGS(th) VDS = 0 V Gate-Body Leakage IGSS VGS = ± 20 V Zero Gate Voltage Drain Current IDSS VGS = 0 V On-State Drain Current ID(on) VGS = 10 V VDS = 10 V - 2 - VGS = 5 V ID = 0.3 A - 2 5 ID = 1 A - 1.3 3 - 2.4 5.6 Drain-Source On-State Resistanceb RDS(on) TC = 125 °C VDS = 48 V TC = 125 °C VGS = 10 V TC = 125 °C V nA μA A Forward Transconductanceb gfs VDS = 7.5 V, ID = 0.525 A 170 350 - mS Diode Forward Voltage VSD IS = 0.99 A, VGS = 0 V 0.7 0.8 1.6 V Dynamic Input Capacitance Ciss - 35 50 Output Capacitance Coss - 25 40 Reverse Transfer Capacitance Crss - 7 10 Drain-Source Capacitance Cds - 30 - - 8 10 - 8.5 10 VGS = 0 V VDS = 25 V, f = 1 MHz pF Switchingc Turn-On Time tON Turn-Off Time tOFF VDD = 25 V, RL = 23 ID 1 A, VGEN = 10 V, Rg = 25 ns Notes a. FOR DESIGN AID ONLY, not subject to production testing. b. Pulse test: PW 300 μs duty cycle 2 %. c. Switching time is essentially independent of operating temperature. Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. S11-1542-Rev. D, 01-Aug-11 2 Document Number: 70223 THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 2N6660, 2N6660-2, 2N6660JANTX, 2N6660JANTXV www.vishay.com Vishay Siliconix TYPICAL CHARACTERISTICS (25 °C, unless otherwise noted) 2.0 100 VGS = 10 V 2.8 V 1.6 80 7V I D - Drain Current (mA) I D - Drain Current (A) VGS = 10 V 8V 6V 1.2 5V 0.8 4V 0.4 2.6 V 60 2.4 V 40 2.2 V 20 3V 2V 0 0 1 2 3 4 1.8 V 2.0 V 0 0 5 0.4 0.8 1.2 1.6 2.0 VDS - Drain-to-Source Voltage (V) VDS - Drain-to-Source Voltage (V) Ohmic Region Characteristics Output Characteristics for Low Gate Drive 1.0 2.8 TJ = - 55 °C 25 °C 2.4 VDS = 15 V R DS(on) - On-Resistance (Ω) I D - Drain Current (A) 0.8 125 °C 0.6 0.4 0.2 1.0 A 0.5 A 2.0 1.6 1.2 0.8 ID = 0.1 A 0.4 0 0 0 4 2 6 8 0 10 VGS - Gate-Source Voltage (V) R DS(on) - Drain-Source On-Resistance (Normalized) R DS(on) - Drain-Source On-Resistance (Ω) 2.0 VGS = 10 V 1.0 0.5 0 0.4 0.8 1.2 1.6 16 20 2.25 VGS = 10 V 2.00 I D = 1.0 A 1.75 0.2 A 1.50 1.25 1.00 0.75 0.50 - 50 2.0 - 10 30 70 110 150 TJ - Junction Temperature (°C) I D - Drain Current (A) On-Resistance vs. Drain Current S11-1542-Rev. D, 01-Aug-11 12 On-Resistance vs. Gate-to-Source Voltage 2.5 0 8 VGS - Gate-Source Voltage (V) Transfer Characteristics 1.5 4 Normalized On-Resistance vs. Junction Temperature 3 Document Number: 70223 THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 2N6660, 2N6660-2, 2N6660JANTX, 2N6660JANTXV www.vishay.com Vishay Siliconix TYPICAL CHARACTERISTICS (25 °C, unless otherwise noted) 10 120 VGS = 0 V VDS = 5 V f = 1 MHz 100 C - Capacitance (pF) I D - Drain Current (mA) TJ = 150 °C 1 25 °C 0.1 80 60 40 C iss C oss 20 C rss 125 °C - 55 °C 0.01 0 0.5 1.0 1.5 2.0 VGS - Gate-to-Source Voltage (V) 0 10 20 Threshold Region 40 50 Capacitance 100 15.0 I D = 1.0 A 50 12.5 VDS = 30 V 10.0 t - Switching Time (ns) VGS - Gate-to-Source Voltage (V) 30 VDS - Drain-to-Source Voltage (V) 48 V 7.5 5.0 2.5 V DD = 25 V Rg = 25 Ω V GS = 0 V to 10 V 20 10 td(off) 5 tr td(on) tf 2 1 0.1 0 0 100 200 300 400 500 600 Q g - Total Gate Charge (pC) Gate Charge 1 I D - Drain Current (A) 10 Load Condition Effects on Switching 1.0 Normalized Effective Transient Thermal Impedance Duty Cycle = 0.5 0.2 Notes: 0.1 Single Pulse 0.1 PDM 0.05 t1 t2 1. Duty Cycle, D = t1 t2 2. Per Unit Base = RthJC = 20 °C/W 0.02 0.01 3. TJM - TC = PDMZthJC(t) 0.01 0.1 1.0 10 100 1K 10 K t1 - Square Wave Pulse Duration (s) Normalized Thermal Transient Impedance, Junction-to-Ambient Vishay Siliconix maintains worldwide manufacturing capability. Products may be manufactured at one of several qualified locations. Reliability data for Silicon Technology and Package Reliability represent a composite of all qualified locations. For related documents such as package/tape drawings, part marking, and reliability data, see www.vishay.com/ppg?70223. S11-1542-Rev. D, 01-Aug-11 4 Document Number: 70223 THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Package Information www.vishay.com Vishay Siliconix TO-205AD (TO-39 TALL LID) CD HD α P Q CH 1 2 CL L1 LU TW 3 r L2 TL LL LC Seating Plane LD DIM. CD CH HD LC (6) LD (7)(8) LL (7)(8) LU (7)(8) L1 (7)(8) L2 (7)(8) P (5) Q (4) r (9) TL (3) TW (2) α (6) ECN: S15-1675-Rev. D, 27-Jul-15 DWG: 5511 INCHES MIN. 0.305 0.240 0.335 MILLIMETERS MAX. 0.335 0.260 0.370 MIN. 7.75 6.10 8.51 0.021 0.750 0.019 0.050 — — 0.050 0.010 0.045 0.034 0.41 12.70 0.41 — 6.35 2.54 — — 0.74 0.71 0.200 TP 0.016 0.500 0.016 — 0.250 0.100 — — 0.029 0.028 MAX. 8.51 6.60 9.40 5.08 TP 45° TP 0.53 19.05 0.48 1.27 — — 1.27 0.25 1.14 0.86 45° TP Notes (1) Dimensions are in inches. Metric equivalents are given for general information only. (2) Beyond radius (r) maximum, TW shall be held for a minimum length of 0.011" (0.028 mm). (3) Dimension TL measured from maximum HD. (4) Outline in this zone is not controlled. (5) Dimension CD shall not vary more than 0.010 (0.25 mm) in zone P. This zone is controlled for automatic handling. (6) Leads at guage plane 0.054" + 0.001", - 0.000" (1.37 mm + 0.03 mm, - 0.00 mm) below seating plane shall be within 0.007" (0.18 mm) radius of true position (TP) at maximum material condition (MMC) relative to tab at MMC. (7) LU applies between L1 and L2, LD applies between L2 and L maximum. Diameter is uncontrolled in L1 and beyond LL minimum. (8) All three leads. (9) Radius (r) applies to both inside corners of tab. (10) Drain is electrically connected to the case. Revison: 27-Jul-15 1 Document Number: 71367 THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000