Specifications and Test Circuits Vishay Dale Environmental and Mechanical Specifications ENVIRONMENTAL AND MECHANICAL SPECIFICATIONS DESCRIPTION LIMITS/CONDITIONS TEST PROCEDURES Thermal Cycle - 55° C, + 85° C, 5 cycles MIL-STD-202, Method 107, Condition A Gross Leak test All units 100 % leak tested MIL-STD-202, Method 112, Condition D 10-8 Atm. Fine Leak Mass spectrometer leak rate less than 2 x Moisture Resistance 95 % RH, + 25° to + 65° C, 10 cycles MIL-STD-202, Method 106 Shock 1000g, 0.35 mS MIL-STD-202, Method 213, Condition I Vibration 10 - 55Hz, 0.06” D.A., 55 - 2000Hz, 20g MIL-STD-202, Method 204, Condition D Solderability Minimum 95 % coverage MIL-STD-202, Method 208 Resistance to Solvents Isopropyl alcohol, terpene and monethanolamine solutions MIL-STD-202, Method 215 cc/sec of helium MIL-STD-202, Method, Condition C TEST CIRCUITS TTL Test Point TTL Load A RL = 390 ohms for 10 TTL + 5.0 V/3.3 V V 0.01 µF Vcc Output CL = 15 pF NC/OE Gnd HCMOS Test Point HCMOS Load A + 5.0 V/3.3 V V www.vishay.com 1 0.01 µF Vcc Output NC/OE Gnd For technical questions contact: [email protected] CL = 50 pF or 15 pF Document Number: 35032 Revision: 03-Mar-05