For more information, please visit the product page. date 08/02/2011 page 1 of 2 SERIES: PD-40V │ DESCRIPTION: 4 PIN POWER DIN FEATURES • PCB mount • vertical • non-shielded RoHS SPECIFICATIONS parameter conditions/description min rated input voltage typ max units 20 Vdc rated input current 7.5 A contact resistance 30 mΩ insulation resistance at 500 Vdc at 500 Vdc, after environmental tests voltage withstand at 50/60Hz for 1 minute 100 50 MΩ MΩ 500 Vac MECHANICAL DRAWING units: mm [inch] 8.80 0.346 2.2X0.8 (4PLCS) 1.9X0.7 (2PLCS) 3.80 0.150 1 8.80 0.346 3 2.40 0.094 2 4 1.60 0.063 MATERIAL PLATING inner shield 0.4T bronze nickel plated contact terminal 0.3T phosphor bronze silver plated cover PBT black color housing PBT black color plastic PA6T 1.70 0.067 (4PLCS) 5.00 0.197 10.60 0.417 PCB LAYOUT TOP VEIW 4.30 0.169 10.60 0.417 11.20 0.441 0.50 0.020 3.50 0.138 1.50 0.059 0.20 (4PLCS) 3.80 0.150 2 14.90 0.587 12.80 0.504 8.80 0.346 1.80 0.071 0.20 (2PLCS) 14.90 0.587 2.00 0.079 4 1 3 1.60 0.063 1.50 0.059 0.2 (4PLCS) 5.00 0.197 8.80 0.346 cui.com 2.40 0.094 For more information, please visit the product page. date 08/02/2011 │ page 2 of 2 CUI Inc │ SERIES: PD-40V │ DESCRIPTION: 4 PIN POWER DIN REVISION HISTORY rev. 1.0 description date initial release 8/02/2011 *The revision history provided is for informational purposes only and is believed to be accurate. Headquarters 20050 SW 112th Ave. Tualatin, OR 97062 800.275.4899 Fax 503.612.2383 cui.com [email protected] CUI offers a one (1) year limited warranty. Complete warranty information is listed on our website. CUI reserves the right to make changes to the product at any time without notice. Information provided by CUI is believed to be accurate and reliable. However, no responsibility is assumed by CUI for its use, nor for any infringements of patents or other rights of third parties which may result from its use. CUI products are not authorized or warranted for use as critical components in equipment that requires an extremely high level of reliability. A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness.