Introduction General-purpose High-load-voltage Small and HighMulti-contact-pair High-current and (2a, 2b, and 1a1b) Low-ON-resistance dielectric-strength High-dielectricstrength Current-limiting Low-output-capacitance and Low-ON-resistance Small and Highload-voltage Certified Models with Standards Certification DIP SOP SSOP USOP VSON G3VM-@HR MOS FET Relays SOP 6-pin, High-current and Low-ON-resistance Type MOS FET Relays in SOP 6-pin packages that achieve the low ON resistance and high switching capacitance of a mechanical relay • Load voltage: 20 V, 40 V, 60 V, 80 V, or 100 V • 20-V Relay: Continuous load current of 2.5 A (5 A) max.* • 40-V Relay: Continuous load current of 2.5 A (5 A) max.* Note: The actual product is marked differently from the image shown here. • 60-V Relay: Continuous load current of 2.3 A (4.6 A) max.* • 80-V Relay: Continuous load current of 1.25 A (2.5 A) max.* • 100-V Relay: Continuous load current of 1.4 A (2.8 A) max.* * Values in parentheses are for connection C. RoHS Compliant ■Application Examples • Semiconductor test equipment • Security equipment • Communication equipment • Industrial equipment • Test & Measurement equipment • Power circuit ■Package (Unit : mm, Average) • Amusement equipment ■Model Number Legend G3V M- @ @ @ @ @ SOP 6-pin 1 2 3 4 5 6.3 1. Load Voltage 2 : 20 V 4 : 40 V 6 : 60 V 8 : 80 V 10 : 100 V 2.1 4.4 Note: The actual product is marked differently from the image shown here. 3. Package H : SOP 6-pin 2. Contact form 1 : 1a (SPST-NO) 4. Additional functions 5. Other informations R: Low ON resistance When specifications overlap, serial code is added in the recorded order. ■Ordering Information Package G3VM-@HR Contact form Terminals 1a (SPST-NO) Surface-mounting Terminals Continuous load current (peak value) * Load voltage (peak value) * Connection Connection A, B C 20 V SOP6 40 V 2.5 A 5A Stick packaging Model Minimum package quantity Model G3VM-21HR G3VM-21HR(TR) G3VM-41HR G3VM-41HR(TR) 60 V 2.3 A 4.6 A G3VM-61HR 80 V 1.25 A 2.5 A G3VM-81HR 75 pcs. G3VM-81HR(TR) 100 V 1.4 A 2.8 A G3VM-101HR G3VM-101HR(TR) * The AC peak and DC value are given for the load voltage and continuous load current. Note: To order tape packaging for Relays with surface-mounting terminals, add “(TR)” to the end of the model number. 118 Tape packaging G3VM-61HR(TR) Minimum package quantity 2,500 pcs. MOS FET Relays Item Symbol LED forward current reduction rate G3VM-21HR 30 ΔIF/°C -0.3 LED reverse voltage VR Connection temperature 20 Connection A Output ΔIO/°C Connection C mA -0.5 -0.3 mA/°C 80 100 2300 1250 1400 4600 2500 2800 -12.5 -18.7 -61.3 -25.0 -37.3 7 3.75 4 lop Connection temperature TJ 7.5 Dielectric strength between I/O (See note 1.) VI-O Ambient operating temperature Ta -40 to +85 Tstg -55 to +125 125 260 V mA Connection A: AC peak/DC Connection B and C: DC mA/°C G3VM-81HR : Ta ≥ 25°C Others : Ta ≥50°C A t=100 ms, Duty=1/10 °C 1500 − Ta ≥ 25°C °C 60 -30.7 -66.7 Measurement conditions V 5000 Pulse ON current Soldering temperature Unit 30 -33.3 -66.6 Ambient storage temperature G3VM-101HR 50 Vrms AC for 1 min -20 to +85 -40 to +85 °C -40 to +125 -55 to +125 °C With no icing or condensation °C 10 s Note: 1. The dielectric strength between the input and output was checked by applying voltage between all pins as a group on the LED side and all pins as a group on the light-receiving side. Connection Diagram 5 3 4 1 6 2 5 3 4 1 6 2 5 3 4 Load AC or DC Load DC Load DC Low-output-capacitance and Low-ON-resistance Connection C 6 2 Current-limiting Connection B 1 High-dielectricstrength Connection A Small and HighMulti-contact-pair High-current and (2a, 2b, and 1a1b) Low-ON-resistance dielectric-strength IO Connection A Connection B 40 2500 Connection C ON current reduction rate G3VM-81HR 125 VOFF Connection B G3VM-61HR 5 TJ Load voltage (AC peak/DC) Continuous load current G3VM-41HR IF High-load-voltage Input LED forward current General-purpose ■Absolute Maximum Ratings (Ta = 25°C) Introduction G3VM-@HR Small and Highload-voltage Certified Models with Standards Certification DIP SOP SSOP USOP VSON G3VM-@HR 119 MOS FET Relays Item Symbol G3VM-21HR G3VM-41HR G3VM-61HR G3VM-81HR G3VM-101HR Unit Minimum High-load-voltage Input General-purpose ■Electrical Characteristics (Ta = 25°C) 1.18 LED forward voltage VF Typical 1.33 Maximum 1.48 Reverse current IR Maximum Capacitance between terminals CT Typical Typical Small and HighMulti-contact-pair High-current and (2a, 2b, and 1a1b) Low-ON-resistance dielectric-strength Trigger LED forward current IFT Release LED forward current IFC 70 − 0.1 0.02 Typical Connection C RON Connection A Connection B Maximum 0.03 0.04 1.15 1.33 1.3 1.48 15 70 2 0.4 5 3 0.2 0.1 0.11 0.1 0.01 0.015 0.02 0.06 0.05 0.008 0.01 0.03 0.025 0.05 0.06 0.07 0.15 0.2 0.025 0.03 0.04 Typical 0.08 0.1 − 0.04 − − 1.2 − ILEAK High-dielectricstrength Capacitance between terminals COFF Current-limiting Low-output-capacitance and Low-ON-resistance Capacitance between I/O terminals CI-O Insulation resistance between I/O terminals RI-O Turn-ON time tON Turn-OFF time tOFF Maximum 10 1.5 10 Typical 1000 460 1000 Maximum − 1000 − Typical 0.8 Minimum 1000 Typical Typical 108 1.5 Maximum Typical 1.0 5.0 0.1 Maximum 0.15 1.0 Measurement conditions 1.18 0.005 Connection C Current leakage when the relay is open 0.4 3 Minimum Connection B Maximum resistance with output ON 1.0 10 Maximum Connection A Output Introduction G3VM-@HR 2.0 1.0 3.0 5.0 0.7 0.15 V IF=10 mA μA VR=5 V pF V=0, f=1 MHz mA G3VM-21HR/41HR/61HR/101HR : IO=100 mA G3VM-81HR : IO=1250 mA mA IOFF=10 μA Ω G3VM-21HR/41HR/61HR : IF=5 mA, IO=2 A (A or B connections) IO=4 A (C connections), t < 1 s G3VM-81HR : IF=5 mA, IO=Continuous load current ratings G3VM-101HR : IF=5 mA, IO=Continuous load current ratings, t < 1 s nA G3VM-21HR/41HR/61HR/101HR : VOFF=Load voltage ratings G3VM-81HR : VOFF=20 V, Ta=50°C pF G3VM-21HR/41HR/61HR/101HR : V=0, f=1 MHz G3VM-81HR : V=0, f=100 MHz pF f=1 MHz, VS=0 V MΩ VI-O=500 VDC, ROH≤60% ms G3VM-21HR : IF=5 mA, RL=200 Ω, VDD=10 V (See note 2.) G3VM-41HR/61HR/81HR/101HR : IF=5 mA, RL=200 Ω, VDD=20 V (See note 2.) Note: 2. Turn-ON and Turn-OFF Times IF 1 6 2 4 RL VDD VOUT Small and Highload-voltage IF Certified Models with Standards Certification VOUT 10% t ON 90% t OFF ■Recommended Operating Conditions For usage with high reliability, Recommended Operation Conditions is a measure that takes into account the derating of Absolute G3VM-@HR DIP SOP Maximum Ratings and Electrical Characteristics. SSOP Each item on this list is an independent condition, so it is not simultaneously satisfy several conditions. USOP Item Symbol G3VM-21HR G3VM-41HR G3VM-61HR G3VM-81HR VSON Load voltage (AC peak/DC) VDD Maximum 20 40 60 64 Minimum 5 Operating LED forward current IF Typical 10 7.5 − Maximum 20 30 Continuous load current (AC peak/DC) IO Maximum 2000 1800 1250 Minimum -20 Ambient operating temperature Ta Maximum 65 60 ■Spacing and Insulation Item Minimum Creepage distances 4.0 Clearance distances 4.0 Internal isolation thickness 0.1 120 Unit mm G3VM-101HR Unit 100 V 7.5 20 mA 1100 65 °C MOS FET Relays G3VM-81HR 50 40 G3VM-21HR G3VM-41HR G3VM-61HR G3VM-101HR 10 0 -40 -20 0 5 G3VM-21HR/41HR: Connection A, B 4 G3VM-101HR: Connection C 3 2 G3VM-61HR: Connection A, B 1 IF - VF 40 60 80 Connection C 2 1.5 Connection A, B 1 0 -20 100 0 20 IO - VON 10 G3VM-21HR G3VM-41HR G3VM-61HR G3VM-101HR IO - VON Ta=25°C IF=5mA Connection A 2 G3VM-21HR 1 0 G3VM-61HR -1 1.5 1 0.5 0 G3VM-81HR -0.5 1.2 1.4 1.6 -3 -0.1 1.8 -0.05 0 LED forward voltage VF (V) G3VM-81HR G3VM-21HR 0.06 0.02 0 -40 G3VM-41HR G3VM-61HR -20 0 20 40 60 80 IO=100mA t<1s G3VM-21HR G3VM-101HR 0.6 G3VM-61HR 0.4 0.2 G3VM-41HR -20 0 20 G3VM-21HR 1 G3VM-61HR 0.1 tOFF G3VM-21HR:Ta=25°C, VDD=10V, RL=200Ω G3VM-41HR/61HR:Ta=25°C, VDD=20V, RL=200Ω 1 10 Turn ON, Turn OFF time tON, tOFF (ms) tON G3VM-41HR 80 100 (Average value) IO=1.25A t<1s 4 3 2 1 0 -20 0 20 40 60 80 100 Ambient temperature Ta (°C) G3VM-81HR/101HR (Average value) G3VM-41HR 0.01 60 Ambient temperature Ta (°C) IFT - Ta 5 tON, tOFF - IF 10 tON G3VM-81HR 1 G3VM101HR tOFF 0.1 Ta=25°C VDD=20V RL=200Ω 0.01 100 LED forward current IF (mA) (Average value) 1 10 DIP SOP SSOP USOP VSON G3VM-@HR Turn ON, Turn OFF time tON, tOFF (ms) tON, tOFF - IF 10 40 0.4 G3VM-81HR 0.8 0 -40 100 0.2 On-state voltage VON (V) (Average value) 1 Ambient temperature Ta (°C) ● Turn ON, Turn OFF time vs. LED forward current G3VM-21HR/41HR/61HR 0 Certified Models with Standards Certification 0.04 Trigger LED forward current IFT (mA) G3VM-101HR 0.08 IFT - Ta (Average value) G3VM-21HR/41HR/61HR: IO=2A, IF=5mA, t<1s, Connection A The others: IO=Continuous Load Current Ratings, IF=5mA, 0.1 t<1s, Connection A -0.2 On-state voltage VON (V) ● Trigger LED forward current vs. Ambient temperature G3VM-21HR/41HR/61HR/101HR 0.12 G3VM-101HR -0.4 Small and Highload-voltage On-state resistance RON (Ω) RON - Ta 0.1 Low-output-capacitance and Low-ON-resistance ● On-state resistance vs. Ambient temperature 0.05 Trigger LED forward current IFT (mA) 1 -1.5 Current-limiting 0.8 (Average value) Ta=25°C IF=5mA Connection A G3VM-41HR 0.6 100 -1 -2 0.1 80 High-dielectricstrength Continuous load current IO (A) G3VM-81HR 60 G3VM-81HR/101HR (Average value) 3 40 Ambient temperature Ta (°C) ● Continuous load current vs. On-state voltage G3VM-21HR/41HR/61HR Ta=25°C 1 20 (Maximum value) 2.5 Ambient temperature Ta (°C) (Average value) 100 0 -20 IO - Ta 3 0.5 G3VM-101HR: Connection A, B 0 -40 20 40 60 80 100 Ambient temperature Ta (°C) ● LED forward current vs. LED forward voltage LED forward current IF (mA) G3VM-21HR/-41HR: G3VM-61HR: Connection C Connection C Continuous load current IO (A) 20 6 G3VM-81HR (Maximum value) Small and HighMulti-contact-pair High-current and (2a, 2b, and 1a1b) Low-ON-resistance dielectric-strength 30 IO - Ta Continuous load current IO (A) (Maximum value) Continuous load current IO (A) IF - Ta 60 ● Continuous load current vs. Ambient temperature G3VM-21HR/41HR/61HR/101HR High-load-voltage LED forward current IF (mA) ● LED forward current vs. Ambient temperature General-purpose ■Engineering Data Introduction G3VM-@HR 100 LED forward current IF (mA) 121 MOS FET Relays ● Turn ON, Turn OFF time vs. Ambient temperature G3VM-21HR/41HR/61HR G3VM-81HR/101HR 10 G3VM-21HR: VDD=10V, RL=200Ω, IF=5mA G3VM-41HR/61HR: VDD=20V, RL=200Ω, IF=5mA tON 1 0.1 tOFF 10 VDD=20V RL=200Ω IF=5mA (Average value) G3VM-81HR tON tON 1 tOFF 0.1 tOFF G3VM-101HR G3VM-41HR 0.01 -40 0 -20 20 40 60 80 0.01 -40 100 0 -20 Ambient temperature Ta (°C) ● Current leakage vs. Load voltage G3VM-21HR/41HR/61HR/101HR ILEAK - VOFF 2.5 G3VM-21HR 2 High-dielectricstrength 1.5 G3VM-101HR 1 G3VM-41HR ILEAK - Ta 10 100 ● Output terminal capacitance vs. Load voltage G3VM-21HR/41HR/61HR/101HR VOFF=80V Current-limiting Low-output-capacitance and Low-ON-resistance 0.01 0 20 40 60 80 100 Load voltage VOFF (V) 0 20 COFF - VOFF (Average value) VOFF=50V VOFF=20V 0 Small and Highload-voltage Certified Models with Standards Certification G3VM-@HR 122 80 1 0.5 DIP SOP SSOP USOP VSON 60 ● Current leakage vs. Ambient temperature G3VM-81HR 0.1 G3VM-61HR 40 Ambient temperature Ta (°C) (Average value) Ta=25°C 20 Output terminal capacitance COFF/COFF(0V) Small and HighMulti-contact-pair High-current and (2a, 2b, and 1a1b) Low-ON-resistance dielectric-strength G3VM-21HR G3VM-61HR tON, tOFF - Ta Turn ON, Turn OFF time tON, tOFF (μs) (Average value) Current leakage ILEAK (nA) High-load-voltage tON, tOFF - Ta Turn ON, Turn OFF time tON, tOFF (ms) General-purpose ■Engineering Data Current leakage ILEAK (nA) Introduction G3VM-@HR 40 60 80 100 Ambient temperature Ta (°C) 1 (Average value) Ta=25°C 0.8 0.6 G3VM-21HR 0.4 G3VM-41HR G3VM-61HR 0.2 G3VM-101HR 0 0 10 20 30 40 Load voltage VOFF (V) MOS FET Relays ●Appearance General-purpose ■Appearance / Terminal Arrangement / Internal Connections ●Terminal Arrangement/Internal Connections (Top View) SOP (Small Outline Package) 5 4 1 2 3 Mold pin mark (See note 3.) OMRON logo Pin 1 mark Model name (See note 2.) 932 LOT.NO. Note: 1. The actual product is marked differently from the image shown here. Note: 2. “G3VM” does not appear in the model number on the Relay. Note: 3. The indentation in the corner diagonally opposite from the pin 1 mark is from a pin on the mold. ■Dimensions (Unit: mm) Surface-mounting Terminals Weight: 0.13 g Actual Mounting Pad Dimensions 4.4±0.25 (Recommended Value, Top View) 6 to 6.3 2.1 max. 6.3±0.25 1.2 High-dielectricstrength 0.15 0.8 2.54±0.25 0.1±0.1 0.4±0.1 0.6±0.3 2.54 2.54 7.0±0.4 Current-limiting Note: The actual product is marked differently from the image shown here. ■Approved Standards Contact form File No. UL (recognized) 1a (SPST-NO) E80555 Low-output-capacitance and Low-ON-resistance UL recognized Approved Standards Small and HighMulti-contact-pair High-current and (2a, 2b, and 1a1b) Low-ON-resistance dielectric-strength 6 High-load-voltage SOP 6-pin Introduction G3VM-@HR Small and Highload-voltage ■Safety Precautions • Refer to the Common Precautions for All MOS FET Relays for precautions that apply to all MOS FET Relays. Certified Models with Standards Certification DIP SOP SSOP USOP VSON G3VM-@HR 123