Series 300 Vishay Dale Printed Circuit Dip Solder Connector FEATURES • Right angle or straight through dip solder terminals • Threaded mounting studs • Male contacts molded in • Mating connector has solder cup or dip solder terminals • Female contacts float to aid in alignment and resist vibration • Permanent mounting provides greater reliability • Polarization provided by contact arrangement and guide pin location • Meets applicable paragraphs of MIL-C-55302 MATERIAL SPECIFICATIONS Contact Pin: Phosphor bronze Contact Socket: Phosphor bronze Contact Plating: Gold plated APPLICATIONS Guide Pins: Stainless steel, passivated Where permanent mounting of male connector to printed circuit board is required with mating female connector available. Standard Body: Glass-filled diallyl phthalate per MIL-M-14, type SDG-F green. Other body material supplied upon request ELECTRICAL SPECIFICATIONS PHYSICAL SPECIFICATIONS Current Rating: 7.5 A Number of Contacts: 7, 15, 19 and 25 Breakdown Voltage: At sea level: 3600 VRMS At 70 000 feet: 975 VRMS Contact Spacing: 0.250", staggered rows provide a 0.125" grid Contact Gauge: #20 AWG Minimum Creepage Path between Contacts: 0.16" Minimum Air Spacebetween Contacts: 0.11" DIMENSIONS in inches (millimeters) 300PR 0.181 [4.60] 0.242 [6.15] 0.242 [6.15] 0.125 ± 0.003 [3.180 ± 0.076] 0.181 [4.60] 0.242 [6.15] 0.125 ± 0.003 [3.180 ± 0.076] 0.06 [1.52] (TYP.) 0.010 0.453 [11.5] 0.181 [4.60] 0.06 [1.52] (TYP.) 0.125 ± 0.002 [3.180 ± 0.051] 0.125 ± 0.003 [3.180 ± 0.076] (TYP.) 15/64 [5.95] CONTACT PIN F B Ø 0.040 [1.02] (TYP.) L D B F D 2.950 + 0.015/- 0.000 [74.900 + 0.381/- 0.000] 2.650 + 0.015/- 0.000 [67.300 + 0.381/- 0.000] F H J K J C U V W X R Y S Z T AA U R F H ([57.2]) M P P BB V S (3.000) R ([76.2]) T L (2.250) N ([19.0]) N P N (1.750) ([44.4]) M D (0.750) M S K L B 3.700 + 0.015/- 0.000 [94.000 + 0.381/- 0.000] 3.400 + 0.015/- 0.000 [86.400 + 0.381/- 0.000] H E 2.450 + 0.015/- 0.000 [62.200 + 0.381/- 0.000] 2.150 + 0.015/- 0.000 [54.600 + 0.381/- 0.000] E J K E C A 1.450 + 0.015/- 0.000 [36.800 + 0.381/-0.000] 1.150 + 0.015/- 0.000 [29.200 + 0.381/- 0.000] D H A A 0.06 [1.52] (TYP.) 0.200 [5.08] B C C 0.125 ± 0.003 [3.180 ± 0.076] 4-40 UNC 2A (TYP.) A E 0.242 [6.15] 0.300 [7.62] 4-40 UNC 2A (TYP.) 4-40 UNC 2A (TYP.) 4-40 UNC 2A (TYP.) 0.220 [5.59] 0.125 ± 0.003 [3.180 ± 0.076] 0.06 [1.52] (TYP.) 0.181 [4.60] W CC 0.200 [5.08] Ø 0.093 [2.36] (TYP.) 0.032 [0.813] (TYP.) GUIDE PIN 3/16 [4.76] TYPICAL SIDE VIEW Document Number: 36023 Revision: 27-Mar-07 7/64 [2.78] 7/64 [2.78] 0.36 [9.14] 7 CONTACTS 7/64 [2.78] 7/64 [2.78] 0.36 [9.14] 15 CONTACTS For technical questions, contact: [email protected] 0.36 [9.14] 19 CONTACTS 0.36 [9.14] 25 CONTACTS www.vishay.com 1 Series 300 Printed Circuit Dip Solder Connector Vishay Dale DIMENSIONS in inches (millimeters) 300S 0.125 [3.18] (TYP.) "C" "B" ± 0.010 [± 0.254] "A" 0.010 0.453 [11.5] 0.125 ± 0.003 [3.180 ± 0.076] 1/32 [0.794] R. (TYP.) 0.125 [3.18] 0.375 [9.52] MIN. R. (TYP.) 0.125 ± 0.003 [3.180 ± 0.076] PANEL CUTOUT 5/16 [7.94] 0.125 ± 0.003 [3.180 ± 0.076] (TYP.) 0.117 [2.97] Ø 0.156 [3.96] (2 PLCS.) 0.200 [5.08] A B 0.125 ± 0.003 [3.180 ± 0.076] 3/32 [2.38] C 0.117 [2.97] D E F 0.117 [2.97] H A B J C K D 0.125 ± 0.003 [3.180 ± 0.076] H C 2.950 + 0.015/- 0.000 [74.900 + 0.381/- 0.000] 2.650 + 0.015/- 0.000 [67.300 + 0.381/- 0.000] E 2.450 + 0.015/- 0.000 [62.200 + 0.381/- 0.000] 2.150 + 0.015/- 0.000 [54.600 + 0.381/- 0.000] A 1.450 + 0.015/- 0.000 [36.800 + 0.381/- 0.000] 1.150 + 0.015/- 0.000 [29.200 + 0.381/- 0.000] B F H J K D E J M V W Y Z U 4-40 UNC 2A (TYP.) AA V BB W S 3/16 [4.76] HEX NUT (TYP.) X T R H Ø 0.046 [1.17] SOLDER CUP #20 AWG (TYP.) U S P (3.000) ([76.2]) S P N F P R T (2.250) ([57.2]) R M (0.750) ([19.0]) M N K L N (1.750) ([44.4]) L C 3.700 + 0.015/- 0.000 [94.000 + 0.381/- 0.000] 3.400 + 0.015/- 0.000 [86.400 + 0.381/- 0.000] F B D 0.117 [2.97] L E A CC GUIDE SOCKET 0.200 [5.08] 0.36 [9.14] 0.36 [9.14] 7 CONTACTS 0.06 [1.52] (TYP.) 0.36 [9.14] 0.36 [9.14] 15 CONTACTS 19 CONTACTS TYPICAL SIDE VIEW 25 CONTACTS 300SE 0.125 [3.18] (TYP.) 0.010 "C" "B" ± 0.010 [± 0.254] 0.453 [11.5] "A" 7/32 [5.56] 1/32 [0.794] R. (TYP.) 0.125 [3.18] 0.125 ± 0.003 [3.180 ± 0.076] R. (TYP.) 0.375 [9.52] MIN. PANEL CUTOUT 0.125 ± 0.003 [3.180 ± 0.076] 0.117 [2.97] Ø 0.156 [3.96] (2 PLCS.) 0.125 ± 0.003 [3.180 ± 0.076] (TYP.) 0.200 [5.08] A B 0.125 ± 0.003 [3.180 ± 0.076] 3/32 [2.38] 1/8 [3.18] C 0.117 [2.97] D E F 0.117 [2.97] H A K C E A B H A 1.450 + 0.015/- 0.000 [36.800 + 0.381/- 0.000] 1.150 + 0.015/- 0.000 [29.200 + 0.381/- 0.000] 2.950 + 0.015/- 0.000 [74.900 + 0.381/- 0.000] 2.650 + 0.015/- 0.000 [67.300 + 0.381/- 0.000] E 2.450 + 0.015/- 0.000 [62.200 + 0.381/- 0.000] 2.150 + 0.015/- 0.000 [54.600 + 0.381/- 0.000] F H J K (1.750) ([44.4]) L B E J (0.750) ([19.0]) M H U W P X Y S Z T AA U BB V S (3.000) ([76.2]) T V N P R F P R S (2.250) ([57.2]) R N M N K L M C D 3.700 + 0.015/- 0.000 [94.000 + 0.381/- 0.000] 3.400 + 0.015/- 0.000 [86.400 + 0.381/- 0.000] F C D 0.117 [2.97] L D 0.125 ± 0.003 [3.180 ± 0.076] Ø 0.032 [0.813] (TYP.) J B 3/16 [4.76] HEX NUT (TYP.) 4-40 UNC 2A (TYP.) CC W GUIDE SOCKET 0.200 [5.08] 0.36 [9.14] 7 CONTACTS www.vishay.com 2 0.36 [9.14] 15 CONTACTS 0.36 [9.14] 19 CONTACTS 0.36 [9.14] 25 CONTACTS For technical questions, contact: [email protected] 0.06 [1.52] (TYP.) TYPICAL SIDE VIEW Document Number: 36023 Revision: 27-Mar-07 Series 300 Printed Circuit Dip Solder Connector Vishay Dale DIMENSIONS in inches (millimeters) 300PE 0.125 ± 0.003 [3.18 ± 0.08] 0.117 [2.97] 0.125 ± 0.003 [3.18 ± 0.08] 0.125 ± 0.003 [3.18 ± 0.08] 0.010 0.453 [11.5] 7/32 [5.56] 3/16 [4.76] 1/8 [3.18] D F H A J B K C L D B H D K F 2.650 + 0.015/- 0.000 [67.31 + 0.38/- 0.00] M H 2.150 + 0.015/- 0.000 [54.61 + 0.38/- 0.00] K B C 0.125 ± 0.003 1.150 + 0.015/- 0.000 [3.18 ± 0.08] [29.21 + 0.38/- 0.00] E (TYP.) 1.450 + 0.015/- 0.005 H [36.83 + 0.38/- 0.13] D F (0.750) ([19.05]) 2.450 + 0.015/- 0.005 [62.23 + 0.38/- 0.13] 3.400 + 0.015/- 0.000 [86.36 + 0.38/- 0.00] J E A N F C 0.117 [2.97] M E A 0.125 ± 0.003 [3.18 ± 0.08] 0.200 [5.08] (TYP.) Ø 0.040 [Ø 1.02] (TYP.) B C E 0.117 [2.97] 15/64 [5.95] A 0.117 [2.97] J L (1.750) ([44.45]) 2.950 + 0.015/- 0.005 [74.93 + 0.38/- 0.13] M L N (2.250) ([57.15]) 3.700 + 0.015/- 0.005 [93.98 + 0.38/- 0.13] P R S U V P U R V S N U T P V U R (3.000) ([76.20]) T U V V S W W 0.36 [9.14] 0.36 [9.14] 0.36 [9.14] 0.032 [Ø 0.813] (TYP.) Ø 0.093 [Ø 2.36] (TYP.) 0.06 [1.52] (TYP.) 4-40 UNC 2A (TYP.) 3/16 HEX NUT [4.76] (TYP.) TYPICAL SIDE VIEW 0.36 [9.14] 15 CONTACTS 7 CONTACTS 25 CONTACTS 19 CONTACTS ORDERING INFORMATION 300 PR -7 W MODEL CONTACTS NUMBER OF CONTACTS WITHOUT GUIDES S = Socket with solder cup PE = Pin with dip solder terminals SE = Socket with dip solder terminals PR = Pin with right angle dip solder terminals Document Number: 36023 Revision: 27-Mar-07 For technical questions, contact: [email protected] (optional on S, PE, and SE models only) www.vishay.com 3 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000