THE WORLD OF DC/DC-CONVERTERS www.peak-electronics.de Tel. +49 ( 0 ) 6135 7026-0 [email protected] P6BUI-xxxxZLF (1kV) P6KUI–xxxxZLF (3kV) PMA-SERIES Rev. 07-2015 1 Watt Unregulated Dual Separate Output DIP8 Case 1-3 kV DC I/O Isolation Low Ripple and Noise The PMA series is a family of cost effective 0.25 – 1.5W single/dual output DC/DC converters. They are encapsulated in an ultra miniature SIP4 (PxAU/IU…) or DIP8 (PxBU/KU…) case. High performance features: 1000-3000Vdc input/output isolation, high efficiency operation, output voltage accuracy of ±3% maximum, input range of ±10% and low output ripple and noise. All specifications typical at Ta=25°C, nominal input voltage and full load unless otherwise specified Input Specifications Output Specifications Voltage Range ±10% Current max. 50 – 478mA (See table) 5 – 38mA (See table) Current No-Load Filter Capacitors Reflected Ripple Current 20mA pk-pk (@12uH) Voltage accuracy ±3% Line regulation ±1.2% (per 1% Vin change) Load regulation ±10% ( 20% to 100% ) (for 3.3Vout) Ripple & noise (20 MHz bandwidth) 100 mV pk-pk Temperature coefficient Capacitor load ±15% ±0.02%/°C 100uF (Test: min. Vin + const. load) General Specifications Efficiency Isolation I/O 70% - 83% (60sec) 1000VDC (P6BUI-xxxxZLF) Environment / Physical Specifications 3000VDC (P6KUI-xxxxZLF) Operation Temp. Isolation I/O Capacitance 60 pF (60sec) Switching Frequency Storage 1000VDC Cooling Humidity MTBF 80 kHz 95% (rel.) (Calculated MIL-HDBK-217F) Safety Standard (variable) .) (designed to meet) (Derating) (UL94V-0 rated) Potting Epoxy (UL94V-0 rated) IEC 60950-1 Weight EMC Specifications Class B Conducted Emissions* EN55022 Class B ESD IEC-61000-4-2 Pref. Criteria A RS IEC-61000-4-3 Pref. Criteria A EFT* IEC-61000-4-4 Pref. Criteria A Surge* IEC-61000-4-5 Pref. Criteria A CS IEC-61000-4-6 Pref. Criteria A PFMF IEC-61000-4-8 Pref. Criteria A Nature / Free Air Plastic Pin Material EN55022 100°C -40°C to 125°C Case Material >1.121 Mhrs Radiated Emissions -40°C to 85°C Case max. 1000 MΩ Isolation I/O Resistance Isolation O/O (See table) *Input filter components are required to meet conducted emission class B (see App Note). An external filter capacitor (e.g. 470uF/100V) is required if the module has to meet IEC61000-4-4 and IEC61000-4-5. PMA-Series – P6BUI / P6KUI – Dual Separate Output – DIP8 - Plastic Case Specification can change without a notice - We accept no liability for any inaccuracy or printing errors. Page 1/3 Brass (Solder coated) ~1.8 g THE WORLD OF DC/DC-CONVERTERS ) ) (mA (mA ad d ) o a L C ) l Lo DC (VD Ful o ull ) e (V ent age nt N nt F r g t r (% l e e a r r u o t r r l ncy Vo Cu Cu ut V ut C e t t t i p p c u u u t t i Inp Inp Inp Ou Ou Eff d Loa Order # ) (mA DUAL SEPARATE OUTPUT P6BUI-3R33R33R3ZLF 3.3 20 399 3.3, 3.3 152, 152 76 P6BUI-3R30505ZLF 3.3 25 433 5, 5 100, 100 70 P6BUI-3R37R27R2ZLF 3.3 25 433 7.2, 7.2 69, 69 70 P6BUI-3R30909ZLF 3.3 30 410 9, 9 56, 56 74 P6BUI-3R31212ZLF 3.3 38 478 12, 12 50, 50 76 P6BUI-3R31515ZLF 3.3 30 404 15, 15 33, 33 75 P6BUI-3R31818ZLF 3.3 30 399 18, 18 28, 28 76 P6BUI-3R32424ZLF 3.3 30 472 24, 24 25, 25 77 P6BUI-053R33R3ZLF 5 15 299 3.3, 3.3 152, 152 67 P6BUI-050505ZLF 5 20 247 5, 5 100, 100 81 P6BUI-057R27R2ZLF 5 16 260 7.2, 7.2 69, 69 77 P6BUI-050909ZLF 5 15 253 9, 9 56, 56 79 P6BUI-051212ZLF 5 20 300 12, 12 50, 50 80 P6BUI-051515ZLF 5 20 247 15, 15 33, 33 81 P6BUI-051818ZLF 5 20 247 18, 18 28, 28 81 P6BUI-052424ZLF 5 25 320 24, 24 25, 25 75 P6BUI-123R33R3ZLF 12 15 111 3.3, 3.3 152, 152 75 P6BUI-120505ZLF 12 10 111 5, 5 100, 100 75 P6BUI-127R27R2ZLF 12 10 107 7.2, 7.2 69, 69 78 P6BUI-120909ZLF 12 10 105 9, 9 56, 56 79 P6BUI-121212ZLF 12 15 125 12, 12 50, 50 80 P6BUI-121515ZLF 12 13 104 15, 15 33, 33 80 P6BUI-121818ZLF 12 20 107 18, 18 28, 28 78 P6BUI-122424ZLF 12 20 128 24, 24 25, 25 78 P6BUI-153R33R3ZLF 15 20 89 3.3, 3.3 152, 152 75 P6BUI-150505ZLF 15 20 88 5, 5 100, 100 76 P6BUI-157R27R2ZLF 15 20 88 7.2, 7.2 69, 69 76 P6BUI-150909ZLF 15 15 88 9, 9 56, 56 76 P6BUI-151212ZLF 15 15 107 12, 12 50, 50 75 P6BUI-151515ZLF 15 15 89 15, 15 33, 33 75 P6BUI-151818ZLF 15 20 87 18, 18 28, 28 77 P6BUI-152424ZLF 15 20 104 24, 24 25, 25 77 P6BUI-243R33R3ZLF 24 5 53 3.3, 3.3 152, 152 79 P6BUI-240505ZLF 24 8 50 5, 5 100, 100 83 P6BUI-247R27R2ZLF 24 5 53 7.2, 7.2 69, 69 78 P6BUI-240909ZLF 24 8 54 9, 9 56, 56 77 P6BUI-241212ZLF 24 6 63 12, 12 50, 50 80 P6BUI-241515ZLF 24 6 54 15, 15 33, 33 77 P6BUI-241818ZLF 24 13 56 18, 18 28, 28 74 P6BUI-242424ZLF 24 5 65 24, 24 25, 25 77 How to Order: Standard 1 kV Isolation Standard 3 kV Isolation P6BUI-xxxxZLF P6KUI-xxxxZLF PMA-Series – P6BUI / P6KUI – Dual Separate Output – DIP8 - Plastic Case Specification can change without a notice - We accept no liability for any inaccuracy or printing errors. Page 2/3 THE WORLD OF DC/DC-CONVERTERS Package / Pinning / Derating 4 1 7.62 (0.30) 0.50 (0.02) 7.62 (0.30) Bottom View All dimensions are typical in millimeters (inches). - Pin diameter: 1.0 +/-0.05 (0.04 +/-0.002) - Pin pitch tolerance: +/-0.35 (+/-0.014) - Case tolerance +/-0.5 (+/-0.02) Specification may change without notice. 5 8 DIP 8 – PLASTIC CASE 2.54 (0.10) 0.50 (0.02) 10.16 (0.40) PEAK 6.85 (0.27) Modelcode Datecode 12.70 (0.50) 3.00 (0.12) OUTPUT POWER TEMPERATURE DERATING GRAPH PIN CONNECTIONS # 100% 75% 50% 25% 85 -40 -20 0 20 40 60 80 100 AMBIENT TEMPERATURE (°C) DUAL Sep. 1 -Vin 4 +Vin 5 +V1out 6 -V1out 7 +V2out 8 -V2out others no Pin App Notes: - Operation under no-load conditions will not damage these devices, but they will not observe the listed specifications. EMC Typical Recommended Circuit (CLASS B): V1out+ C1 C2 PEAK PMA-Series Dual Sep. +Vin L L o a d V1outV2out+ -Vin V2outC3 L o a d Vin C1 C2 C3 / C4 L 3.3 5 12 15 24 2.2uF/100V 2.2uF/100V 2.2uF/100V 2.2uF/100V 2.2uF/100V 2.2uF/100V 470pF/2kV 18uH 18uH 18uH 18uH 18uH C4 PMA-Series – P6BUI / P6KUI – Dual Separate Output – DIP8 - Plastic Case Specification can change without a notice - We accept no liability for any inaccuracy or printing errors. Page 3/3