P15PG_2:1

P15PG-xxxxE/Z2:1LF
Mainzer Straße 151–153
D-55299 Nackenheim
Tel. +49 6135 7026-0
Fax: +49 6135 931070
www.peak-electronics.de
[email protected]
PM7L-SERIES
Rev.02-2011
15 Watt
2:1 Wide Input
2” x 2” Case
1.5 kV DC I/O Isolation
Regulated Output
Single and Dual Output
Continuous Short Circuit Prot.
The PM7L series is a family of cost effective 15-30W single & dual output
DC-DC converters. These converters are made with nickle-coated brass
case in a 2”x2” with high performance features such as 1500 VDC
input/output isolation voltage, continuous short circuit protection with
automatic restart and tight line / load regulation. Devices are encapsulated
by using flame retardant resin. High performance features are high
efficiency operation up to 87% and output voltage accuracy of ±1%
maximum.
All specifications typical at Ta=25°C, nominal input voltage and full load unless otherwise specified
Input Specifications
Voltage Range
Input Filter
Input Reflected Ripple Current¹
Start up Time (Nom. Vin and constant resistive load)
Output Specifications
Voltage Accuracy
Short Circuit Protection
Over Current Protection
Line Regulation
Load Regulation
Ripple and Noise (20Mhz bandwidth)
Temperature Coefficient
2:1 Wide Input (See Table)
Capacitors
35 mA pk-pk
20mS, typ.
± 1%
Indefinite (Automatic Recovery)
140% of max. Iout
± 0.5%
Single: ± 0.5% (0% - 100%)
Dual: ± 0.5% (10% - 100%)
100 mV pk-pk
± 0.02% / °C
General Specifications
Efficiency
I/O Isolation Voltage (3 sec.)
I/O Isolation Capacitance
I/O Isolation Resistance
Switching Frequency
Humidity
Reliability Calculated MTBF (MIL-HDBK-217F)
Safety Standard (designed to meet)
See Table
1500 VDC
1000 pF, typ.
1000 M Ohm
125 kHz, typ.
95% rel H
> 1.121 Mhrs
IEC 60950-1
Physical Specifications
Case Material
Potting Material
Weight
Nickel Coated Brass
Epoxy (UL94V-0 rated)
~ 60g, typ.
Environment Specifications
Operating Temperature
Maximum Case Temperature
Storage Temperature
Cooling
RoHS Conform
-40 to +85°C (for 100% load)
100°C
-40 to +125°C
Free Air Convection (10mm distance required)
Soldering 260°C, max. (1.5mm from case 10s.)
PM7L-Series – P15PG-xxxxE/Z2:1LF – Single and Dual Output – 2”x2” - Metal Case
Specification can change without a notice – We accept no liability for any inaccuracy or printing errors.
Page 1/4
Selection Guide
Single Output
A)
A)
)
d (m
mA) ad (mA
d (m
(
a
a
o
)
d
o
L
²
C
)
o
oa
ll L
n.
(uF)
(VD
VDC nt No L nt Full L
t Mi
t Fu
d
(
e
)
n
n
a
g
e
e
e
o
a
%
r
r
rre
rre
y(
lta g
or L
Volt
C ur
Cur
t Cu put Cu
ienc
t Vo
acit
put
put
pu t
In p u
Inpu
In
O ut
O ut
O ut
Effic
C ap
Order #
SINGLE OUTPUT
P15PG-123R3E2:1LF
P15PG-1205E2:1LF
P15PG-127R2E2:1LF
P15PG-1209E2:1LF
P15PG-1212E2:1LF
P15PG-1215E2:1LF
P15PG-1218E2:1LF
P15PG-1224E2:1LF
P15PG-243R3E2:1LF
P15PG-2405E2:1LF
P15PG-247R2E2:1LF
P15PG-2409E2:1LF
P15PG-2412E2:1LF
P15PG-2415E2:1LF
P15PG-2418E2:1LF
P15PG-2424E2:1LF
P15PG-483R3E2:1LF
P15PG-4805E2:1LF
P15PG-487R2E2:1LF
P15PG-4809E2:1LF
P15PG-4812E2:1LF
P15PG-4815E2:1LF
P15PG-4818E2:1LF
P15PG-4824E2:1LF
9-18
9-18
9-18
9-18
9-18
9-18
9-18
9-18
18-36
18-36
18-36
18-36
18-36
18-36
18-36
18-36
36-72
36-72
36-72
36-72
36-72
36-72
36-72
36-72
30
30
30
30
30
30
30
30
25
25
25
25
25
25
25
25
20
20
20
20
20
20
20
20
1031
1524
1506
1470
1470
1470
1470
1453
515
744
744
735
735
726
726
726
257
372
372
367
363
359
359
359
3.3
5
7.2
9
12
15
18
24
3.3
5
7.2
9
12
15
18
24
3.3
5
7.2
9
12
15
18
24
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
3000
3000
2083
1666
1250
1000
833
625
3000
3000
2083
1666
1250
1000
833
625
3000
3000
2083
1666
1250
1000
833
625
80
82
83
85
85
85
85
86
80
84
84
85
85
86
86
86
80
84
84
85
86
87
87
87
3300
3300
2200
1000
1000
680
470
470
3300
3300
2200
1000
1000
680
470
470
3300
3300
2200
1000
1000
680
470
470
If you need other specifications, please enquire.
Notes:
PM7L-Series – P15PG-xxxxE/Z2:1LF – Single and Dual Output – 2”x2” - Metal Case
Specification can change without a notice – We accept no liability for any inaccuracy or printing errors.
Page 2/4
Selection Guide
Dual Output
A)
A)
)
d (m
mA) ad (mA
d (m
(
a
a
o
)
o
d
L
²
C
)
o
oa
ll L
n.
(uF)
(VD
VDC nt No L nt Full L
t Fu
t Mi
d
(
e
n
)
n
a
g
e
e
e
o
a
r
%
r
rre
y(
rre
lta g
or L
Cur
C ur
Volt
t Cu put Cu
ienc
t Vo
acit
pu t
put
put
In p u
Inpu
In
O ut
O ut
O ut
Effic
C ap
Order #
DUAL OUTPUT
P15PG-123R3Z2:1LF
P15PG-1205Z2:1LF
P15PG-127R2Z2:1LF
P15PG-1209Z2:1LF
P15PG-1212Z2:1LF
P15PG-1215Z2:1LF
P15PG-1218Z2:1LF
P15PG-1224Z2:1LF
P15PG-243R3Z2:1LF
P15PG-2405Z2:1LF
P15PG-247R2Z2:1LF
P15PG-2409Z2:1LF
P15PG-2412Z2:1LF
P15PG-2415Z2:1LF
P15PG-2418Z2:1LF
P15PG-2424Z2:1LF
P15PG-483R3Z2:1LF
P15PG-4805Z2:1LF
P15PG-487R2Z2:1LF
P15PG-4809Z2:1LF
P15PG-4812Z2:1LF
P15PG-4815Z2:1LF
P15PG-4818Z2:1LF
P15PG-4824Z2:1LF
9-18
9-18
9-18
9-18
9-18
9-18
9-18
9-18
18-36
18-36
18-36
18-36
18-36
18-36
18-36
18-36
36-72
36-72
36-72
36-72
36-72
36-72
36-72
36-72
30
30
30
30
30
30
30
30
25
25
25
25
25
25
25
25
20
20
20
20
20
20
20
20
1031
1524
1506
1488
1488
1488
1470
1470
515
753
744
735
726
726
726
718
257
372
372
367
363
359
359
359
± 3.3
±5
± 7.2
±9
± 12
± 15
± 18
± 24
± 3.3
±5
± 7.2
±9
± 12
± 15
± 18
± 24
± 3.3
±5
± 7.2
±9
± 12
± 15
± 18
± 24
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
± 1500
± 1500
± 1041
± 833
± 625
± 500
± 416
± 312
± 1500
± 1500
± 1041
± 833
± 625
± 500
± 416
± 312
± 1500
± 1500
± 1041
± 833
± 625
± 500
± 416
± 312
80
82
83
84
84
84
85
85
80
83
84
85
86
86
86
87
80
84
84
85
86
87
87
87
± 1000
± 1000
± 680
± 470
± 470
± 330
± 220
± 220
± 1000
± 1000
± 680
± 470
± 470
± 330
± 220
± 220
± 1000
± 1000
± 680
± 470
± 470
± 330
± 220
± 220
If you need other specifications, please enquire.
Notes:
PM7L-Series – P15PG-xxxxE/Z2:1LF – Single and Dual Output – 2”x2” - Metal Case
Specification can change without a notice – We accept no liability for any inaccuracy or printing errors.
Page 3/4
Package / Pinning / Derating
PEAK
PxxPG-xxxxE/Z2:1LF
All Dimensions are typical in mm (inch). Pin diameter 1.0 +/-0.05 (0.04 +/-0.002)
Pin pitch tolerance: +/-0.35 (+/-0.014) Case tolerance +/-0.5 (+/-0.02)
#
1
2
3
4
5
PIN CONNECTIONS
SINGLE
DUAL
+Vin
+Vin
- Vin
- Vin
+Vout
+Vout
Omitted Common
- Vout
- Vout
App Notes:
¹ = Measured Input reflected ripple current with a simulated source inductance of 12uH.
² = Tested by minimal Vin and constant resistive load.
- Operation under no-load conditions will not damage these devices, but they will not observe the listed specifications.
PM7L-Series – P15PG-xxxxE/Z2:1LF – Single and Dual Output – 2”x2” - Metal Case
Specification can change without a notice – We accept no liability for any inaccuracy or printing errors.
Page 4/4