Datasheet

UNISONIC TECHNOLOGIES CO., LTD
PN2907A
PNP SILICON TRANSISTOR
PNP GENERAL PURPOSE
AMPLIFIER

DESCRIPTION
This UTC PN2907A is designed for use as a general purpose
amplifier and switch requiring collector currents to 600 mA.

ORDERING INFORMATION
Ordering Number
Lead Free
Halogen Free
PN2907AG-AB3-R
PN2907AL-T92-B
PN2907AG-T92-B
PN2907AL-T92-K
PN2907AG-T92-K
Note: Pin Assignment: E: Emitter
C: Collector

Package
SOT-89
TO-92
TO-92
B: Base
1
B
E
E
Pin Assignment
2
C
B
B
3
E
C
C
Packing
Tape Reel
Tape Box
Bulk
MARKING
SOT-89
www.unisonic.com.tw
Copyright © 2015 Unisonic Technologies Co., Ltd
TO-92
1 of 6
QW-R201-041.G
PN2907A

PNP SILICON TRANSISTOR
ABSOLUTE MAXIUM RATINGS (TA=25°C, unless otherwise specified.)
PARAMETER
Collector-Emitter Voltage
Collector-Base Voltage
Emitter-Base Voltage
Collector Current-Continuous
RATINGS
UNIT
-60
V
-60
V
-5
V
-600
mA
SOT-89
350
mW
Power Dissipation
PD
TO-92
625
mW
Junction Temperature
TJ
+150
C
Storage Temperature
TSTG
-40 ~ +150
C
Notes: 1. Absolute maximum ratings are those values beyond which the device could be permanently damaged.
Absolute maximum ratings are stress ratings only and functional device operation is not implied.
2. These are steady state limits. The factory should be consulted on applications involving pulsed or low duty
cycle operations.

SYMBOL
VCEO
VCBO
VEBO
IC
THERMAL DATA
PARAMETER
Thermal resistance, junction to Ambient

SYMBOL
SOT-89
TO-92
JA
RATINGS
104
200
UNIT
℃/W
℃/W
ELECTRICAL CHARACTERISTICS (Ta=25C, unless otherwise specified.)
PARAMETER
OFF CHARACTERISTICS
Collector-Emitter Breakdown Voltage
Collector-Base Breakdown Voltage
Emitter-Base Breakdown Voltage
Base Cutoff Current
Collector Cutoff Current
Collector Cutoff Current
SYMBOL
BVCEO
BVCBO
BVEBO
IB
ICEX
ICBO
TEST CONDITIONS
MIN
IC=-10mA, IB=0
IC=-10μA, IE=0
IE=-10μA , IC=0
VCB=-30V, VEB=-0.5V
VCE=-30V, VBE=-0.5V
VCB=-50V, IE=0
VCB=-50V, IE=0, Ta=150C
-60
-60
-5
IC=-0.1mA, VCE=-10V
IC=-1.0 mA, VCE=-10V
IC=-10 mA, VCE=-10V
IC=-150 mA, VCE=-10V (Note)
IC=-500 mA, VCE=-10V (Note)
IC=-150mA, IB=-15mA
IC=-500mA, IB=-50mA
IC=-150mA, IB=-15mA (Note)
IC=-500mA, IB=-50mA
75
100
100
100
50
TYP
MAX
UNIT
-50
-50
-0.02
-20
V
V
V
nA
nA
μA
μA
ON CHARACTERISTICS
DC Current Gain
hFE
Collector-Emitter Saturation Voltage
(Note)
VCE(SAT)
Base-Emitter Saturation Voltage
VBE(SAT)
SMALL SIGNAL CHARACTERISTICS
Current Gain – Bandwidth Product
fT
IC=-50mA, VCE=-20V, f=100MHz
Output Capacitance
Cob
VCB=-10V, IE=0, f=100kHz
Input Capacitance
Cib
VEB=-2V, IC=0, f=100kHz
SWITCHING CHARACTERISTICS
Turn-on Time
tON
VCC=-30V, IC=-150mA
Delay Time
tDLY
IB1=-15mA
Rise Time
tR
Turn-off Time
tOFF
VCC=-6V, IC=-150mA
Storage Time
tS
IB1=IB2=-15mA
Fall Time
tF
Note: Pulse Test: Pulse Width  300ms, Duty Cycle2.0%
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
300
-0.4
-1.6
-1.3
-2.6
V
V
V
V
8
30
MHz
pF
pF
45
10
40
100
80
30
ns
ns
ns
ns
ns
ns
200
2 of 6
QW-R201-041.G
PN2907A

PNP SILICON TRANSISTOR
TEST CIRCUITS
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
3 of 6
QW-R201-041.G
PN2907A
Base Emitter On Voltage, VBE(ON) (V)
TYPICAL CHARACTERISTICS
Capacitance (pF)
Collector Current, ICBO (nA)
Base Emitter Voltage, VBE(SAT) (V)

PNP SILICON TRANSISTOR
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
4 of 6
QW-R201-041.G
PN2907A
Time (nS)
TYPICAL CHARACTERISTICS(Cont.)
Time (nS)

PNP SILICON TRANSISTOR
Rise Time vs Collector and Turn On Base
Currents
Turn ON Base Current, IBf (mA)
-50
tR =-15V
-20
-10
-5
30ns
-2
60ns
-1
-10
-100
-500
Collector Current, IC (mA)
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
5 of 6
QW-R201-041.G
PN2907A
PNP SILICON TRANSISTOR
Relative To Values At IC=10mA, Char
Relative To Values At VCE=10V, Char
TYPICAL CHARACTERISTICS FOR COMMON EMITTER (f=1kHz)

UTC assumes no responsibility for equipment failures that result from using products at values that
exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or
other parameters) listed in products specifications of any and all UTC products described or contained
herein. UTC products are not designed for use in life support appliances, devices or systems where
malfunction of these products can be reasonably expected to result in personal injury. Reproduction in
whole or in part is prohibited without the prior written consent of the copyright owner. The information
presented in this document does not form part of any quotation or contract, is believed to be accurate
and reliable and may be changed without notice.
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
6 of 6
QW-R201-041.G