A115A-A115M FAST RECOVERY RECTIFIERS High-reliability discrete products and engineering services since 1977 FEATURES Available as “HR” (high reliability) screened per MIL-PRF-19500, JANTX level. Add “HR” suffix to base part number. Available as non-RoHS (Sn/Pb plating), standard, and as RoHS by adding “-PBF” suffix. MAXIMUM RATINGS Symbol A115F A115A A115B A115C A115D A115E A115M Units Maximum peak repetitive reverse voltage Parameter VRRM 50 100 200 300 400 500 600 V Maximum RMS input voltage VRMS 35 70 140 210 280 350 420 V Maximum DC reverse voltage VR(DC) 50 100 200 300 400 500 600 V Maximum average forward output current L = 0.375” TA = 55°C TA = 25°C Maximum peak surge current IO A 3.0 5.0 IFSM 110 200 (8.3ms half sine wave, superimposed on rated load) (Non repetitive 0.001 second half-sine wave, full load TJ = @ 150°C I2t for fusing, RMS 0.001 to 0.01 seconds A I2t 20.0 A2s Operating junction temperature range TJ -65° to 150 °C Storage temperature range Tstg -65° to 175 °C (1) For capacitive load derate current by 20%. ELECTRICAL CHARACTERISTICS (TA = 25°C unless otherwise specified) Parameter Symbol A115F A115A A115B A115C A115D A115E A115M Units Maximum instantaneous forward voltage drop @ 5A VF Maximum reverse current @ TJ = 25°C @ TJ = 150°C V IR Typical reverse recovery time trr 140 ns Maximum reverse recovery time trr 200 ns 1.1 2 100 2 100 5 300 5 300 5 300 5 200 5 200 Rev. 20151030 mA High-reliability discrete products and engineering services since 1977 A115A-A115M FAST RECOVERY RECTIFIERS MECHANICAL CHARACTERISTICS Case: SOD-64 Marking: Body painted, alpha-numeric Polarity: Cathode band Rev. 20151030 High-reliability discrete products and engineering services since 1977 A115A-A115M FAST RECOVERY RECTIFIERS Rev. 20151030 High-reliability discrete products and engineering services since 1977 A115A-A115M FAST RECOVERY RECTIFIERS Rev. 20151030