PanMPO™ Reference Cable Assemblies S P E C I F I C AT I O N S H E E T technical information PanMPO™ Reference Cable Assemblies are pre-terminated 12-fiber reference grade MPO-compatible assemblies that are used to perform permanent link testing to commission and certify MPO-based structured cabling to international and domestic cabling standards. These reference cable assemblies are terminated with reference grade PanMPO™ Connectors on both ends that allow for any combination of gender and polarity cable plant to be tested using single jumper referencing methods. PanMPO™ Reference Cords contain connectors that display nominal optical and geometrical characteristics. application For testing MPO-based cable plant in support of 40GBASE-SR, 100GBASE-SR10, and 40GBASE-SR4 applications. Reference quality MPO cords must be used to ensure accurate, repeatable and reproducible measurements for permanent link certification. Reference Cable Assemblies with PanMPO™ Connectors provide contractors the capability to maintain high measurement integrity over time through the ability to retract the alignment pins in the connector for effective cleaning of the complete MPO connector surface. construction physical properties Cable type: Round jacketed 3.0mm Cable outside diameter (OD): 3.0mm Cable jacket ratings: Plenum (OFNP) Minimum bend radius: 30mm Fiber types: OM3 - 50/125µm* OS2 - 9/125µm Cable retention strength: 50N Cable flex: 100 cycles @4.9N Connector types end ‘A’: PanMPO™ Female Cable twist: 10 cycles @15N Connector durability: 500 mating cycles Connector color, end ‘A’: Yellow Fiber count: 12 Jacket color: Aqua - OM3 Yellow - OS2 Connector types, end ‘B’: PanMPO™ Female Connector color, end ‘B’: Yellow optical properties environmental properties Maximum connector insertion loss: 0.25dB Storage and shipping temperature: Minimum connector return loss: 30dB - OM3 65dB - OS2 Operating and installation temperature: -40°C to +70°C 0°C to +70°C standards Meets or exceeds ISO/IEC 11801, TIA/EIA-568-C.3, TIA-604-5 (FOCIS-5), TIA/EIA-568-C.1, RoHS compliant. *Compatible for testing OM3/OM4 cable plant w w w. p a n d u it.c o m PanMPO™ Reference Cable Assemblies part number CHARACTER 1 2 3 4 5 6 7 8 9 10 11 12 EXAMPLE F R B X R 7 - R 7 M 0 2 1 – Fiber Product 5 6 7 8 F = Fiber 2 – Cable Type R = Reference 3 – Fiber Count B = 12 fiber round jacketed 4 – Fiber Type X = OM3, 50/125μm* 9 = OS2, 9/125µm – Connector A Quality R = Precision Reference – Connector A 7 = PanMPO™ Female – DASH – Connector B Quality R = Precision Reference 9 – Connector B 7 = PanMPO™ Female 10 – Unit of Length M = Meters 11,12 – Length (standard length is 2m) cable assembly detail Key Up Cable Female Key Down Female Serialized Label (Red) Key Up Male Key Down Connector #2 (Female Connector Shown) Male Connector #1 (Male Connector Shown) Length *Compatible for testing OM3/OM4 cable plant WORLDWIDE SUBSIDIARIES AND SALES OFFICES PANDUIT CANADA Markham, Ontario [email protected] Phone: 800.777.3300 PANDUIT EUROPE LTD. London, UK [email protected] Phone: 44.20.8601.7200 PANDUIT SINGAPORE PTE. LTD. Republic of Singapore [email protected] Phone: 65.6305.7575 PANDUIT JAPAN Tokyo, Japan [email protected] Phone: 81.3.6863.6000 PANDUIT LATIN AMERICA Guadalajara, Mexico [email protected] Phone: 52.33.3777.6000 PANDUIT AUSTRALIA PTY. LTD. Victoria, Australia [email protected] Phone: 61.3.9794.9020 For a copy of Panduit product warranties, log on to www.panduit.com/warranty For more information Visit us at www.panduit.com Contact Customer Service by email: [email protected] or by phone: 800.777.3300 ©2014 Panduit Corp. ALL RIGHTS RESERVED. FBSP80--WW-ENG 11/2014