UNISONIC TECHNOLOGIES CO., LTD TIP42C-Q PNP PLANAR TRANSISTOR PNP EPITAXIAL PLANAR TRANSISTOR DESCRIPTION The UTC TIP42C-Q is a PNP epitaxial planar transistor, designed for using in general purpose amplifier and switching applications. FEATURES * Complement to TIP41C ORDERING INFORMATION Ordering Number Lead Free Halogen Free TIP42CL-Q-x-TA3-T TIP42CG-Q-x-TA3-T Package TO-220 Pin Assignment 1 2 3 B C E Packing Tube MARKING INFORMATION PACKAGE MARKING TO-220 www.unisonic.com.tw Copyright © 2014 Unisonic Technologies Co., Ltd 1 of 3 QW-R203-049.a TIP42C-Q PNP PLANAR TRANSISTOR ABSOLUTE MAXIMUM RATING (unless otherwise specified ) PARAMETER SYMBOL RATINGS UNIT Collector Base Voltage VCBO -100 V Collector to Emitter Voltage VCEO -100 V Emitter-Base Voltage VEBO -5 V Collector Current (DC) IC -6 A Collector Current (Pulse) IC -10 A Base Current IB -2 A Collector Dissipation (TC=25°C) PC 65 W Junction Temperature TJ +150 °C Storage Temperature TSTG -65 ~ +150 °C Note Absolute maximum ratings are those values beyond which the device could be permanently damaged. Absolute maximum ratings are stress ratings only and functional device operation is not implied. ELECTRICAL CHARACTERISTICS (TC=25°C) PARAMETER SYMBOL TEST CONDITIONS Collector-Emitter Breakdown Voltage (Note) BVCEO IC=-1mA, IB=0 Collector Cutoff Current ICEO VCE=-60V, IB=0 Collector Cutoff Current ICES VCE=-100V, VEB=0 Emitter Cutoff Current IEBO VBE=-5V, IC=0 Collector-Emitter Saturation Voltage (Note) VCE(SAT) IC=-6A, IB=-600mA Base-Emitter on Voltage (Note) VBE(ON) VCE=-4V, IC=-6A, hFE1 VCE=-4V, IC=-300mA DC Current Gain (Note) hFE2 VCE=-4V, IC=-3A Current Gain Bandwidth Product fT VCE=-10V, IC=-500mA, f=1MHz Note: Pulse Test: PW≤300μs, Duty Cycle≤2% MIN -100 30 15 3 TYP MAX UNIT V -0.7 mA -400 μA -1 mA -2.2 V -2.4 V 75 MHz CLASSIFICATION OF hFE2 RANK RANGE A 15~30 UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw B 28~48 C 45~75 2 of 3 QW-R203-049.a TIP42C-Q TYPICAL CHARACTERISTICS ms ms 1 0.5 s Collector Current, IC (A) Collector Dissipation, PC (W) 5m DC Current Gain, hFE PNP PLANAR TRANSISTOR UTC assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all UTC products described or contained herein. UTC products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 3 of 3 QW-R203-049.a