Pre-Configured Industrial Distribution Frame (IDF) SPECIFICATION SHEET specifications Rack mount Ethernet switches shall be deployed and protected with an industrial distribution frame (IDF) enclosure which meets UL 508A, UL Type 4/12 and IP66. The IDF shall be thermally and spatially validated for use in environments up to 50°C. There shall be a wall mount option with secure front and rear switch access. The IDF shall accommodate two distribution layer switches and up to three access layer switches with UPS for commonly used copper and fiber based deployments. Ground bar, infrastructure ground cables, and ESD ports shall be included. A standardized, pre-configured equipment and accessory layout shall be included. technical information UL 508A Standard for Industrial Control Panels, cUL Listed per CSA, UL Type 4/12 and IP66 Rated Dimensions: 48.54"H x 23.62"W x 29.95"D (1233mm x 600mm x 761mm) Mounting: Wall mount Capacity: 26 Rack Units , (5) 1U switches and (1) 2U UPS, 96 incoming copper cables (expandable to 144), 72 strands fiber or 36 fiber duplex ports (expandable to 72-ports) Maximum load rating of 350 lbs. (158.8kg) Color and material: RAL7035 light-gray polyester powder paint; door and backplane made of 16 gauge cold roll steel, center and wall sections made of 14 gauge cold roll steel Thermal analysis: Validated to 50°C with recommended AC unit Included with IDF: Pre-Installed: (1) Square hole front and rear rack angles, (1) FRME1U fiber enclosure, (2) CPPL48WBLY 48-port patch panel, (2) CMPHF1 cable management, (1) RGRB19CN grounding bar, (3) equipment ground whips, (1)10” DIN Rail, (2) fiber spools, (2) back panels, (2) ESD ports, 30" length of duct, cage nuts, labeling for cable routing, strain relief bars Included Accessories: (1) ESD wrist strap, (1) HLS-15R0 hook and loop, (1) RGCBNJ660P22 #6 AWG grounding cable, mounting hardware, conduit schedule and ingress template, installation guide key features and benefits Pre-Configuration: Reduces time required for planning, designing, procurement, and installation resulting in 25% faster implementation Defined equipment locations and cable routings: Incorporate Panduit developed best practices in connectivity, cable management, wiring, and grounding to ensure network reliability Detailed installation guide: Provides easy, repeatable design instructions assuring consistency and saving time on the job-site Thermally validated: Panduit Laboratories tested the thermal performance with recommended AC unit and verified the ambient limitations to 50°C with the specified network equipment; additional back end space allows for 3X the cooling capacity over typical deployments for increased reliability Limits access to authorized personnel for a secure network applications The Panduit Pre-Configured IDF is engineered to deploy and protect 19" rack mount switches on the factory floor in an industrial network. Consistent design and equipment placement is offered to reduce engineering and deployment time. The IDF wall mount enclosure protects switches, both physically and thermally in harsh industrial environments. It is designed around the use of popular fiber based Cisco* 3750X and copper based Cisco* 2960S switch deployments. *Cisco is a registered trademark of Cisco Technology Inc. ^Quantities given for (2) 2960S switches. A 3rd switch may require more connectivity. +For RUs 1-14 order 2M patch cord FX2ERLNLNSNM002 and for RUs 15-26 order 1M patch cord FX2ERLNLNSNM001. w ww . p a n d u it.c o m Wall mount frame enclosure: ZDF48-EA Panduit Products, Ordered Separately Small diameter, 48 patch cords (order qty. 2)^: UTP28SP8INBU-48 Mini-Com Modules, Cat 6, RJ45 (order qty. 96)^: CJ688TGBU ® Cat 6 UTP Copper Cable, riser: PUR6004BU-UY LC Opticom OM3/OM4 FAP: FAP12WAQDLCZ ® Standards: Key-locking handle: Pre-Configured IDF Opti-Core ® Fiber Optic Patch Cords, LC to LC MM, duplex+: FX2ERLNLNSNM001 FX2ERLNLNSNM002 Opti-Core ® OM3 Fiber Optic Distribution Cable, MM, riser: FODRX24Y LC OptiCam OM3/OM4 Duplex Fiber Optic Connectors: FLCDMCXAQY ® Panduit Products for 3rd Cisco* 2960S Switch, Ordered Separately Mini-Com® Modular Patch Panel Strain Relief Bar 48-port, 2 RU: CPPL48WBLY Strain Relief Bar 7" Multi-Depth: SRB19MDBL Strain Relief Bar Extended 2": SRB19BLY Strain Relief Bar Straight: SRBS19BL-XY Vertical Cable Manager 2" Wide, Short (order qty. 2): CMVDR2S StructuredGround ™ Bonding Cage Nuts and Screws Green, #12-24: CNB4K Cage Nut and Screws #12-24: CNWS1224-C Other Equipment, Ordered Separately Pentair AC Unit: N280426G050 Cisco* Switches (order qty. 2): 3750X Cisco* Switches (order qty. 2-3): 2960S 2U UPS up to 1500W Pre-Configured Industrial Distribution Frame (IDF) IDF elevation recommendation STACK 1 STACK 2 STACK 1 STACK 2 ! DC INPUTS FOR REMOTE POWER SUPPLY SPECIFIED IN MANUAL +12V @7.5A. ! DC INPUTS FOR REMOTE POWER SUPPLY SPECIFIED IN MANUAL +12V @7.5A. RATING CONSOLE 100-240V~ 5.0A-2.5A, 50-60Hz CONSOLE 100-240V~ 5.0A-2.5A, 50-60Hz RATING RU 25-26 RU 24 RU 23 RU 22 RU 21 RU 20 RU 19 RU 18 RU 17 RU 15-16 RU 12-14 Open Panduit RGRB19CN Ground Bar Panduit FRME1U Fiber Enclosure Open (Additional FRME1U If Required) Customer Switch with 12-Fiber LS NICs – “B” Panduit CMPHF1 Horizontal Cable Manager Customer Switch with 12-Fiber LS NICs– “A” Panduit CMPHF1 Horizontal Cable Manager Optional Customer Switch – “C” Optional Panduit CPP48WBLY 48-Port Copper Patch Panel Open RU 11 RU 9-10 Customer Switch – “B” Panduit CPP48WBLY 48-Port Copper Patch Panel RU 8 RU 7 RU 5-6 Open Customer Switch – “A” Panduit CPP48WBLY 48-Port Copper Patch Panel RU 4 Panduit SRBBRWC-KIT Strain Relief Bar RU 2-3 RU 1 Customer UPS Open USB PORT I OVERLOAD PROTECTOR Test Smart-UPS UNINTERRUPTIBLE POWER SUPPLY 1 0 0 0 INPUT PUSH TO RESET O w ww . apcc. com SENSITIVITY Front View OUTPUT 120V 50/60 Hz Rear View IDF operating range with air conditioner Recommended Air Conditioning depending on Factory Floor Ambient Temperature and Electronic/Heat Load of Network Equipment: Impact of N280426G050* Air Conditioner on Maximum Allowable Ambient Temperature in Factory No Air Conditioner Layout N28* Air Conditioner Installed Rating (C°) UPS No UPS (2) 3750X and (3) 2960S 20 25 (2) 3750X and (2) 2960S 25 (2) 3750X and (1) 2960S 25 (2) 3750X Rating (C°) Layout UPS No UPS (2) 3750X and (3) 2960S 50 52 30 (2) 3750X and (2) 2960S 50 52 30 (2) 3750X and (1) 2960S 52 52 30 35 (2) 3750X 52 52 (1) 3750X and (1) 2960S 30 35 (1) 3750X and (1) 2960S 52 52 (1) 3750X 35 40 (1) 3750X 52 52 *Purchased separately from Pentair. WORLDWIDE SUBSIDIARIES AND SALES OFFICES PANDUIT CANADA Markham, Ontario Phone: 800.777.3300 PANDUIT EUROPE LTD. London, UK Phone: 44.20.8601.7200 PANDUIT SINGAPORE PTE. LTD. Republic of Singapore Phone: 65.6305.7575 PANDUIT JAPAN Tokyo, Japan Phone: 81.3.6863.6000 PANDUIT LATIN AMERICA Guadalajara, Mexico Phone: 52.33.3777.6000 PANDUIT AUSTRALIA PTY. LTD. Victoria, Australia Phone: 61.3.9794.9020 For a copy of Panduit product warranties, log on to www.panduit.com/warranty Visit us at www.panduit.com/ia [email protected] ©2015 Panduit Corp. ALL RIGHTS RESERVED. ZCSP18--WW-UKE 12/2015