1N4001GP, 1N4002GP, 1N4003GP, 1N4004GP, 1N4005GP, 1N4006GP, 1N4007GP Datasheet

1N4001GP, 1N4002GP, 1N4003GP, 1N4004GP, 1N4005GP, 1N4006GP, 1N4007GP
www.vishay.com
Vishay General Semiconductor
Glass Passivated Junction Plastic Rectifier
FEATURES
SUPERECTIFIER
• Superectifier
application
®
structure
for
high
reliability
• Cavity-free glass-passivated junction
• Low forward voltage drop
• Low leakage current, typical IR less than 0.1 μA
• High forward surge capability
DO-204AL (DO-41)
• Solder dip 275 °C max. 10 s, per JESD 22-B106
• AEC-Q101 qualified
• Material categorization: For definitions of compliance
please see www.vishay.com/doc?99912
PRIMARY CHARACTERISTICS
IF(AV)
1.0 A
VRRM
50 V, 100 V, 200 V, 400 V, 600 V,
800 V, 1000 V
MECHANICAL DATA
IFSM (8.3 ms sine-wave)
30 A
Case: DO-204AL (DO-41), molded epoxy over glass body
IFSM (square wave tp = 1 ms)
45 A
IR
5.0 μA
VF
1.1 V
Molding compound meets UL 94 V-0 flammability rating
Base P/N-E3 - RoHS-compliant, commercial grade
Base P/NHE3 - RoHS-compliant, AEC-Q101 qualified
TJ max.
175 °C
Package
DO-204AL (DO-41)
Diode variations
Single die
Terminals: Matte tin plated leads, solderable per
J-STD-002 and JESD 22-B102
E3 suffix meets JESD 201 class 1A whisker test, HE3 suffix
meets JESD 201 class 2 whisker test
Polarity: Color band denotes cathode end
TYPICAL APPLICATIONS
Note
• For part numbers with “E” suffix, they are”-E3” commercial
grade only
For use in general purpose rectification of power supplies,
inverters, converters and freewheeling diodes for both
consumer, and automotive applications.
MAXIMUM RATINGS (TA = 25 °C unless otherwise noted)
PARAMETER
SYMBOL
Maximum repetitive peak
reverse voltage
1N4001GP 1N4002GP 1N4003GP 1N4004GP 1N4005GP 1N4006GP 1N4007GP UNIT
VRRM
50
Maximum RMS voltage
VRMS (1)
Maximum DC blocking voltage
VDC (1)
Maximum average forward rectified
current 0.375" (9.5 mm) lead length
at TA = 75 °C
IF(AV) (1)
1.0
A
Peak forward surge current 8.3 ms
single half sine-wave
superimposed on rated load
IFSM (1)
30
A
IFSM (1)
35
Non-repetitive peak
forward surge current 
square waveform
TA = 25 °C (fig. 3)
tp = 1 ms
tp = 2 ms
Rating for fusing (t < 8.3 ms)
Operating junction and
storage temperature range
200
400
600
800
1000
V
35
70
140
280
420
50
100
200
400
600
560
700
V
800
1000
V
45
tp = 5 ms
Maximum full load reverse current,
full cycle average 0.375" (9.5 mm)
lead length TA = 75 °C
100
A
30
IR(AV) (1)
30
μA
I2t (2)
3.7
A2s
TJ, TSTG (1)
- 65 to + 175
°C
Notes
(1) JEDEC® registered values
(2) For device using on bridge rectifier application
Document Number: 88504
1
For technical questions within your region: [email protected], [email protected], [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Revision: 04-Dec-13
1N4001GP, 1N4002GP, 1N4003GP, 1N4004GP, 1N4005GP, 1N4006GP, 1N4007GP
www.vishay.com
Vishay General Semiconductor
ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted)
PARAMETER
TEST
CONDITIONS
Maximum
instantaneous
forward voltage
1.0 A
Maximum DC
reverse current
at rated DC
blocking voltage
SYMBOL 1N4001GP 1N4002GP 1N4003GP 1N4004GP 1N4005GP 1N4006GP 1N4007GP UNIT
1.1
VF
TA = 25 °C
V
5.0
IR (1)
μA
TA = 125 °C
50
Typical reverse
recovery time
IF = 0.5 A,
IR = 1.0 A,
Irr = 0.25 A
trr
2.0
μs
Typical junction
capacitance
4.0 V,
1 MHz
CJ
8.0
pF
Note
(3) JEDEC® registered values
THERMAL CHARACTERISTICS (TA = 25 °C unless otherwise noted)
PARAMETER
SYMBOL 1N4001GP 1N4002GP 1N4003GP 1N4004GP 1N4005GP 1N4006GP 1N4007GP UNIT
Typical thermal resistance
RJA (1)
55
(1)
25
RJL
°C/
W
Note
Thermal resistance from junction to ambient at 0.375" (9.5 mm) lead length, PCB mounted
(1)
ORDERING INFORMATION (Example)
PREFERRED P/N
UNIT WEIGHT (g)
PREFERRED PACKAGE CODE
BASE QUANTITY
DELIVERY MODE
1N4004GP-E3/54
0.335
54
5500
13" diameter paper tape and reel
1N4004GP-E3/73
0.335
73
3000
Ammo pack packaging
1N4004GPHE3/54 (1)
0.335
54
5500
13" diameter paper tape and reel
1N4004GPHE3/73 (1)
0.335
73
3000
Ammo pack packaging
Note
AEC-Q101 qualified
(1)
RATINGS AND CHARACTERISTICS CURVES (TA = 25 °C unless otherwise noted)
30
Peak Forward Surge Current (A)
Average Forward Rectified Current (A)
1.0
0.8
0.6
0.4
60 Hz
Resistive or Inductive Load
0.375" (9.5 mm) Lead Length
0.2
0
TJ = TJ Max.
8.3 ms Single Half Sine-Wave
25
20
15
10
5
0
25
50
75
100
125
150
175
1
10
100
Ambient Temperature (°C)
Number of Cycles at 60 Hz
Fig. 1 - Forward Current Derating Curve
Fig. 2 - Maximum Non-repetitive Peak Forward Surge Current
Document Number: 88504
2
For technical questions within your region: [email protected], [email protected], [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Revision: 04-Dec-13
1N4001GP, 1N4002GP, 1N4003GP, 1N4004GP, 1N4005GP, 1N4006GP, 1N4007GP
www.vishay.com
Vishay General Semiconductor
100
45
tp = 1 ms
Junction Capacitance (pF)
Peak Forward Surge Current (A)
50
40
35
tp = 2 ms
30
tp = 5 ms
25
tp
20
TJ = 25 °C
f = 1.0 MHz
Vsig = 50 mVp-p
10
15
Square Waveform
10
25
50
75
100
1
0.1
125
10
100
Reverse Voltage (V)
Fig. 3 - Non-Repetitive Peak Forward Surge Current
Fig. 6 - Typical Junction Capacitance
100
Transient Thermal Impedance (°C/W)
100
Instantaneous Forward Current (A)
1
Ambient Temperature (°C)
10
1
TJ = 25 °C
Pulse Width = 300 μs
1 % Duty Cycle
0.1
0.01
0.6
0.8
1.0
1.2
1.4
1.6
10
1
0.1
0.01
0.1
1
10
100
Instantaneous Forward Voltage (V)
t - Pulse Duration (s)
Fig. 4 - Typical Instantaneous Forward Characteristics
Fig. 7 - Typical Transient Thermal Impedance
Instantaneous Reverse Current (μA)
10
TJ = 100 °C
1
0.1
TJ = 25 °C
0.01
0
20
40
60
80
100
Percent of Rated Peak Reverse Voltage (%)
Fig. 5 - Typical Reverse Characteristics
Document Number: 88504
3
For technical questions within your region: [email protected], [email protected], [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Revision: 04-Dec-13
1N4001GP, 1N4002GP, 1N4003GP, 1N4004GP, 1N4005GP, 1N4006GP, 1N4007GP
www.vishay.com
Vishay General Semiconductor
PACKAGE OUTLINE DIMENSIONS in inches (millimeters)
DO-204AL (DO-41)
1.0 (25.4)
MIN.
0.107 (2.7)
0.080 (2.0)
DIA.
0.205 (5.2)
0.160 (4.1)
1.0 (25.4)
MIN.
0.034 (0.86)
0.028 (0.71)
DIA.
Note
0.026 (0.66)
• Lead diameter is
for suffix “E” part numbers
0.023 (0.58)
Document Number: 88504
4
For technical questions within your region: [email protected], [email protected], [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Revision: 04-Dec-13
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free
requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference
to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21
conform to JEDEC JS709A standards.
Revision: 02-Oct-12
1
Document Number: 91000
Similar pages