0.2MB

The following document contains information on Cypress products.
FUJITSU MICROELECTRONICS
SUPPORT SYSTEM
SS01-71104-1E
F2MC-16 Family EMULATOR
LQFP-80P PROBE HEADER TYPE 3
MB2147-562-E
OPERATION MANUAL
PREFACE
Thank you for purchasing the LQFP-80P*1 probe header type 3 (MB2147-562-E) for the F2MC-16
family emulator.
The LQFP-80P probe header type 3 is used to connect the F2MC*2-16L/16LX emulator (MB214701-E)*3 and the F2MC-16L/16LX emulator PGA-299P adapter board (MB2147-20-E)*4 to a user
system. That uses FUJITSU MICROELECTRONICS F2MC-16LX microcontroller MB90820 series
(LQFP-80P).
This manual explains the handling of the LQFP-80P probe header type 3 for the F2MC-16 family
emulator. Before using the MB2147-562-E, be sure to read this manual.
Please contact the sales or support representative for details on the mass production and evaluation
MCU models that can be used with this product.
*1 : The lead pitch of package (FPT-80P-M11) is 0.65mm and the body size is 14mm × 14mm.
Using the product safely.
*2 : F2MC is the abbreviation of FUJITSU Flexible Microcontroller.
*3 : Referred to as "emulator"
*4 : Referred to as "adapter board"
■ Handling and use
The handling and use of this product and notes regarding safety are included in the operation manual
of the F2MC-16 family emulator.
Follow the instructions in for the use of this product.
• F2MC-16/16LX EMULATOR MB2147-01-E OPERATION MANUAL
• F2MC-16/16LX EMULATOR PGA-299P ADAPTER BOARD
MB2147-20-E OPERATION MANUAL
■ European RoHS compliance
Products with a -E suffix on the part number are European RoHS compliant products.
■ Notice on this document
All information included in this document is current as of the date it is issued. Such information is
subject to change without any prior notice.
Please confirm the latest relevant information with the sales representatives.
■ Caution of the products described in this document
The following precautions apply to the product described in this manual.
CAUTION
Indicates a feature that, if not used correctly, may result in minor or moderate injuries, and which may cause the customer system to malfunction.
Cuts
The product contains sharp edges that are left unavoidably exposed. This product
has parts with sharp points that are exposed.
Do not touch edge of the product with your bare hands.
Damage
When connect the header board to the user system, correctly position the index
mark (▲) on the NQPACK mounted on the user system with the index mark (▲)
on the header board, otherwise the emulator system and user system might be
damaged.
Damage
When mounting a mass production MCU, correctly position pin 1, otherwise the
mass production MCU and user system might be damaged.
i
• The contents of this document are subject to change without notice.
Customers are advised to consult with sales representatives before ordering.
• The information, such as descriptions of function and application circuit examples, in this document are presented solely for the purpose of reference to show examples of operations and uses of FUJITSU MICROELECTRONICS semiconductor device; FUJITSU MICROELECTRONICS does not warrant proper operation of the device with respect to
use based on such information. When you develop equipment incorporating the device based on such information, you
must assume any responsibility arising out of such use of the information. FUJITSU MICROELECTRONICS assumes
no liability for any damages whatsoever arising out of the use of the information.
• Any information in this document, including descriptions of function and schematic diagrams, shall not be construed
as license of the use or exercise of any intellectual property right, such as patent right or copyright, or any other right
of FUJITSU MICROELECTRONICS or any third party or does FUJITSU MICROELECTRONICS warrant non-infringement of any third-party's intellectual property right or other right by using such information. FUJITSU MICROELECTRONICS assumes no liability for any infringement of the intellectual property rights or other rights of third
parties which would result from the use of information contained herein.
• The products described in this document are designed, developed and manufactured as contemplated for general use,
including without limitation, ordinary industrial use, general office use, personal use, and household use, but are not
designed, developed and manufactured as contemplated (1) for use accompanying fatal risks or dangers that, unless
extremely high safety is secured, could have a serious effect to the public, and could lead directly to death, personal
injury, severe physical damage or other loss (i.e., nuclear reaction control in nuclear facility, aircraft flight control, air
traffic control, mass transport control, medical life support system, missile launch control in weapon system), or (2)
for use requiring extremely high reliability (i.e., submersible repeater and artificial satellite).
Please note that FUJITSU MICROELECTRONICS will not be liable against you and/or any third party for any claims
or damages arising in connection with above-mentioned uses of the products.
• Any semiconductor devices have an inherent chance of failure. You must protect against injury, damage or loss from
such failures by incorporating safety design measures into your facility and equipment such as redundancy, fire protection, and prevention of over-current levels and other abnormal operating conditions.
• Exportation/release of any products described in this document may require necessary procedures in accordance with
the regulations of the Foreign Exchange and Foreign Trade Control Law of Japan and/or US export control laws.
• The company names and brand names herein are the trademarks or registered trademarks of their respective owners.
Copyright ©2008 FUJITSU MICROELECTRONICS LIMITED All rights reserved
ii
1. Checking the Delivered Product
Before using the LQFP-80P probe header type 3, confirm that the following components are included in the box:
:1
• LQFP-80P probe header type 3*1
• Screws for securing header board (M2 × 10mm, 0.4mm pitch)
:4
• Washer
:4
:1
• NQPACK080SB*2
3
:1
• HQPACK080SB160*
• Operation manual (Japanese version)
:1
• Operation manual (English version, this manual)
:1
*1 : Referred to as "header board". Header board is mounted on YQPACK080SB-4W (Tokyo
Eletech Corporation), referred to as “YQPACK”.
*2 : IC socket manufactured by Tokyo Eletech Corporation, referred to as “NQPACK”,and supplied
with a screwdriver and 3 guide pins. A socket offering higher reliability, NQPACK080SB-SL
(Tokyo Eletech Corporation) (sold separately), can be used by making an IC socket mounting
hole on the user system board. For more information, contact Tokyo Eletech Corporation.
*3 : IC Socket cover manufactured by Tokyo Eletech Corporation, referred to as “HQPACK”, with
4 screws for securing HQPACK (M2 × 6mm, 0.4mm pitch).
This product is used as an emulator system by combining with an optional “F2MC-16L/LX EMULATOR” and “F2MC-16L/LX EMULATOR PGA-299P ADAPTER BOARD” (sold separately).
Please contact the sales or support representative for details on the adapter board that can be used
with this product.
2. Handling Precautions
The header board is precision-manufactured to improve dimensional accuracy and to ensure reliable
contact. The header is therefore sensitive to mechanical shock. To ensure correct use of the header
in the proper environment, observe the following points regarding its insertion and removal:
• Avoid placing any stress on the NQPACK mounted on the user system while the header board
is connected.
1
3. Notes on Designing
■ Notes on designing the printed circuit board for the user system
Once the header board is connected to the user system, the heights of parts mounted in the space
around the header board are restricted.
The printed circuit board of the user system must be designed with due consideration given to this
restriction (Figure 1).
69mm
30mm
80mm
2
CN2
99
100 99
100
Approx. 35mm*
FLAT CABLE CN B1
CN3
1
FLAT CABLE CN B2
CN1
2
Approx.
13mm*
37mm
1
* : The height differs slightly depending on how the YQPACK and the NQPACK are
engaged.
Figure 1 Header board dimensions
2
■ MCU footprint design notes
Figure 2 shows the recommended dimensions of the NQPACK footprint mounted on the printed circuit board of the user system.
The printed circuit board of the user system must be designed with due consideration given to this
footprint as well as to the mass production MCU.
For more information, contact the Tokyo Eletech Corporation.
0.65mm × 19 = 12.35mm
6.0mm
0.35mm
2.3mm
0.65mm
2.3mm
6.0mm
13.0 mm
No.1 pin
3 - φ1.0mm
φ3.2mm
SL-type
Figure 2 Recommended dimensions of the footprint for mounting the NQPACK
3
4. Procedure for Connecting the User System
Before using the LQFP-80P probe header type 3, mount the supplied NQPACK on the user system.
The header board is used combining the adapter board. To connect the header board to the adapter
board, use the flat cable (2 lines) supplied by the emulator sold separately. Refer to the operation
manuals of the adapter board about the way to connect.
■ Connecting
1. To connect the header board to the user system, match the index mark (▲) on the NQPACK
mounted on the user system with the index mark (▲) on the header board and then insert it (See
Figure3) . The pin of YQPACK is thin and easy to bent. Insert NQPACK after confirm that the
pin of YQPACK is not bent.
2. Insert each screw for securing header board in each of the four screw holes on the header board
through a washer, and then first tighten the screws in opposing corners followed by the two remaining screws (See Figure 4) .
To tighten the screws, use the screwdriver supplied with the NQPACK to finally tighten the four
screws in sequence. Tightening the screws too tight might result in a defective contact.
Flat cable connector
NQPACK index (▲)
Header board index (▲)
Figure 3 Index position
4
Screws for securing header board
Washer
Header board
YQPACK
NQPACK
User system
Figure 4 Header board connection
■ Disconnection
To disconnect the header board from the user system, remove all four screws, and then pull the header board straight out of the socket.
5
5. Mounting Mass Production MCUs
To mount a mass production MCU on the user system, use the supplied HQPACK (See Figure 5).
■ Mounting
1. To mount a mass production MCU on the user system, match the index mark (▲) on the NQPACK mounted on the user system with the index mark (●) on the mass production MCU.
2. Confirm that the mass production MCU is correctly mounted on the NQPACK. Next, insert the
HQPACK into a NQPACK.
The pin of HQPACK is thin and easy to bent. Insert NQPACK after confirm that the pin of HQPACK is not bent.
3. Insert each screw for securing HQPACK in each of four screw holes on the HQPACK, and then
first tighten the screws in opposing corners followed by the two remaining screws.
To tighten the screws, use the screwdriver supplied with the NQPACK to finally tighten the four
screws in sequence. Tightening the screws too tight might result in a defective contact.
Screws for securing HQPACK
HQPACK
Mass production MCU
NQPACK
User system
Figure 5 Mounting a mass production MCU
■ Disconnection
To remove the HQPACK, remove all four screws, and pull out the HQPACK vertically.
6
6. Connector Pin Assignment
The header board connects the signals of the evaluation MCU mounted on the adapter board via the
flat cable connectors (two) on the header board according to pin information (the same assignments
as YQPACK) about the production MCU.
For details on the production MCU's pin information, refer to the datasheet or hardware manual for
the relevant MCU.
■ Pin assignment
Tables 1 and 2 list the pin assignments among the flat cable connector, the evaluation MCU on the
adapter board, and the production MCU.
For details on the names of signal conductors of the evaluation MCU, refer to the operation manual
for the emulator or adapter board.
Comments in the tables are given below.
*1 : Connected to the main power supply of the evaluation MCU.
*2 : Connected to the main power supply (Vcc) of the production MCU. The connection pin numbers are 40 and 60.
*3 : Connected to the ground of the evaluation MCU.
*4 : Connected to the ground (Vss) of the production MCU. The connection pin numbers are 20
and 61.
“ - ” : Unconnected pin (left open).
7
Table 1 Pin assignment of the flat cable connector B1
8
Connector Pin
Numbers
Evaluation MCU
Pin Numbers
Production MCU
Pin Numbers
Connector Pin
Numbers
Evaluation MCU
Pin Numbers
Production MCU
Pin Numbers
100
98
96
94
92
90
88
86
84
82
80
78
76
74
72
70
68
66
64
62
60
58
56
54
52
50
48
46
44
42
40
38
36
34
32
30
28
26
24
22
20
18
16
14
12
10
8
6
4
2
*3
*3
208
259
79
147
78
*3
146
223
26
94
219
*3
*1
226
275
105
224
*3
274
104
170
227
*3
*3
220
100
97
164
98
*3
23
165
276
108
172
*3
229
130
292
131
247
*3
293
248
133
62
134
*3
*4
*4
2
5
6
8
9
*4
79
*4
*2
*4
71
74
75
62
*4
*4
*4
63
65
66
*4
68
77
*4
12
27
28
30
31
*4
34
36
37
39
41
*4
99
97
95
93
91
89
87
85
83
81
79
77
75
73
71
69
67
65
63
61
59
57
55
53
51
49
47
45
43
41
39
37
35
33
31
29
27
25
23
21
19
17
15
13
11
9
7
5
3
1
*3
80
148
*3
207
258
206
77
160
*3
268
269
95
33
169
*3
34
167
35
225
32
*3
106
163
162
96
270
*3
221
273
271
222
99
*3
107
277
109
173
228
*3
193
194
132
*3
61
*3
195
63
294
*3
*4
3
4
*4
7
1
1
80
*4
14
16
26
*4
72
73
*4
76
*2
*4
64
15
67
69
70
*4
78
10
11
13
*2
*4
29
32
33
*4
35
*4
38
42
43
*4
Table 2 Pin assignment of the flat cable connector B2
Connector Pin
Numbers
Evaluation MCU
Pin Numbers
Production MCU
Pin Numbers
Connector Pin
Numbers
Evaluation MCU
Pin Numbers
Production MCU
Pin Numbers
100
98
96
94
92
90
88
86
84
82
80
78
76
74
72
70
68
66
64
62
60
58
56
54
52
50
48
46
44
42
40
38
36
34
32
30
28
26
24
22
20
18
16
14
12
10
8
6
4
2
*3
*3
267
149
260
209
*3
218
263
153
8
*1
*3
5
103
166
*3
151
*3
6
92
266
91
215
*3
16
264
213
14
203
*3
299
201
141
110
278
*3
*3
*1
252
71
138
*3
296
136
197
250
135
*3
*4
*4
19
*4
*2
*4
*4
*4
*4
*4
25
24
*4
*4
*2
59
57
56
*4
53
50
49
47
46
*4
99
97
95
93
91
89
87
85
83
81
79
77
75
73
71
69
67
65
63
61
59
57
55
53
51
49
47
45
43
41
39
37
35
33
31
29
27
25
23
21
19
17
15
13
11
9
7
5
3
1
*3
159
217
*3
81
82
83
87
212
*3
86
150
84
272
168
*3
7
210
261
158
216
*3
157
156
155
88
15
*3
154
255
143
202
142
*3
101
230
262
140
200
*3
199
70
251
198
137
*3
295
64
196
*3
*4
18
*4
*4
*4
*4
*4
*4
19
23
17
21
22
*4
58
55
54
52
51
*4
48
45
44
*4
9
SS01-71104-1E
FUJITSU MICROELECTRONICS • SUPPORT SYSTEM
F2MC-16 Family EMULATOR
LQFP-80P PROBE HEADER TYPE 3
MB2147-562-E
OPERATION MANUAL
August 2008 the first edition
Published FUJITSU MICROELECTRONICS LIMITED
Edited
Business & Media Promotion Dept.
Similar pages