150 RMI www.vishay.com Vishay BCcomponents Aluminum Electrolytic Capacitors Radial Miniature, Low Impedance FEATURES • Very long useful life: 4000 h to 10 000 h at 105 °C, high stability, high reliability • Very low impedance and low ESR in smaller case sizes than the 136 RVI series • Excellent ripple current capability • AEC-Q200 qualified • Polarized aluminum electrolytic capacitors, non-solid electrolyte • Radial leads, cylindrical aluminum case with pressure relief, insulated with a blue sleeve • Charge and discharge proof • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 136 RVI miniaturize 048 RML 148 RUS lower Z longer life APPLICATIONS 150 RMI • Power supplies (SMPS, DC/DC converters) for general industrial, EDP, audio-video, automotive, and telecommunications • Smoothing, filtering, buffering Fig. 1 QUICK REFERENCE DATA DESCRIPTION Nominal case sizes (Ø D x L in mm) Rated capacitance range, CR Tolerance on CR Rated voltage range, UR Category temperature range Endurance test at 105 °C Useful life at 105 °C Useful life at 40 °C, 1.8 x IR applied Shelf life at 0 V, 105 °C Based on sectional specification Climatic category IEC 60068 MARKING VALUE 8 x 12 to 18 x 40 22 μF to 8200 μF ± 20 % 10 V to 100 V -55 °C to +105 °C 3000 h to 6000 h 4000 h to 10 000 h 200 000 h to 500 000 h 1000 h IEC 60384-4 / EN130300 55/105/56 The capacitors are marked (where possible) with the following information: • Rated capacitance (in μF) • Tolerance on rated capacitance, code letter in accordance with IEC 60062 (M for ± 20 %) • Rated voltage (in V) • Date code, in accordance with IEC 60062 • Code indicating factory of origin • Name of manufacturer • Upper category temperature (105 °C) • Negative terminal identification • Series number (150) SELECTION CHART FOR CR, UR, AND RELEVANT NOMINAL CASE SIZES (Ø D x L in mm) CR (μF) 22 47 100 150 220 330 470 680 1000 1200 1500 2200 3300 4700 6800 8200 Revision: 26-Apr-16 10 8 x 12 10 x 12 10 x 16 12.5 x 20 12.5 x 25 16 x 25 16 x 31 - 16 8 x 12 8 x 12 8 x 15 10 x 12 10 x 16 10 x 20 12.5 x 20 12.5 x 25 16 x 20 16 x 31 16 x 35 18 x 40 25 8 x 12 10 x 12 10 x 16 10 x 20 12.5 x 20 12.5 x 25 16 x 20 12.5 x 35 16 x 31 16 x 35 18 x 40 - UR (V) 35 8 x 12 8 x 15 10 x 12 10 x 16 10 x 20 12.5 x 20 12.5 x 25 16 x 20 16 x 20 12.5 x 35 16 x 31 18 x 31 18 x 40 - 50 10 x 12 10 x 16 10 x 20 12.5 x 20 12.5 x 25 16 x 25 16 x 31 16 x 31 18 x 40 - 63 8 x 12 10 x 12 10 x 16 10 x 20 12.5 x 20 12.5 x 25 16 x 20 16 x 20 16 x 25 16 x 31 18 x 40 - 100 8 x 12 18 x 20 - Document Number: 28323 1 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 150 RMI www.vishay.com Vishay BCcomponents DIMENSIONS in millimeters AND AVAILABLE FORMS ØD ØD L L - + F 15 min. Ød 4 1 0 5 min. Ød F Fig. 2 - Form CA: long leads Fig. 3 - Form CB: cut leads Formed leads for Ø D = 8 mm with pitch F = 5 mm Fig. 4 - Form TFA: taped in box (ammopack) Table 1 DIMENSIONS in millimeters, MASS AND PACKAGING QUANTITIES NOMINAL CASE SIZE ØDxL CASE CODE Ød Ø Dmax. Lmax. F MASS (g) PACKAGING QUANTITIES FORM CA FORM CB FORM TFA 8 x 12 13 0.6 8.5 13.0 3.5 ± 0.5 1.1 5000 5000 1000 8 x 15 13L 0.6 8.5 16.0 3.5 ± 0.5 1.3 5000 5000 1000 10 x 12 14 0.6 10.5 13.5 5.0 ± 0.5 1.6 1000 500 800 10 x 16 15 0.6 10.5 17.5 5.0 ± 0.5 1.9 500 500 800 10 x 20 16 0.6 10.5 22.0 5.0 ± 0.5 2.2 500 500 800 12.5 x 20 17 0.6 13.0 22.0 5.0 ± 0.5 4.0 500 500 500 12.5 x 25 18 0.6 13.0 27.0 5.0 ± 0.5 5.0 250 250 500 12.5 x 35 18LL 0.6 13.0 37.5 5.0 ± 0.5 6.0 250 250 - 16 x 20 19a 0.8 16.5 22.0 7.5 ± 0.5 6.0 250 250 250 16 x 25 19 0.8 16.5 27.0 7.5 ± 0.5 8.0 250 250 250 16 x 31 20 0.8 16.5 33.5 7.5 ± 0.5 9.0 100 100 250 16 x 35 21 0.8 16.5 37.5 7.5 ± 0.5 11.0 100 100 - 18 x 20 1820 0.8 18.5 22.0 7.5 ± 0.5 8.0 100 100 - 18 x 31 1831 0.8 18.5 33.5 7.5 ± 0.5 12.5 100 100 - 18 x 40 1840 0.8 18.5 42.5 7.5 ± 0.5 16.5 100 100 - Revision: 26-Apr-16 Document Number: 28323 2 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 150 RMI www.vishay.com Vishay BCcomponents ORDERING EXAMPLE ELECTRICAL DATA SYMBOL CR IR IL2 tan Z DESCRIPTION Rated capacitance at 100 Hz, tolerance ± 20 % Rated RMS ripple current at 100 kHz, 105 °C Max. leakage current after 2 min at UR Max. dissipation factor at 100 Hz Max. impedance at 100 kHz Electrolytic capacitor 150 series 470 μF / 16 V; ± 20 % Nominal case size: Ø 10 mm x 12 mm; Form TFA Ordering Code: MAL215035471E3 Former 12NC: 2222 150 35471 Note • Unless otherwise specified, all electrical values in Table 2 apply at Tamb = 20 °C, P = 86 kPa to 106 kPa, RH = 45 % to 75 %. Table 2 ELECTRICAL DATA AND ORDERING INFORMATION UR (V) 10 16 25 35 CR 100 Hz (μF) NOMINAL CASE SIZE ØDxL (mm) IR 100 kHz 105 °C (mA) IL2 2 min (μA) tan 100 Hz Z 100 kHz +20 °C () Z 100 kHz -40 °C () 470 680 1000 2200 3300 4700 6800 220 330 470 470 680 1000 1500 2200 3300 4700 6800 8200 220 330 470 680 1000 1500 2200 2200 3300 4700 6800 100 220 220 330 470 680 1000 1000 1500 1500 2200 3300 4700 8 x 12 10 x 12 10 x 16 12.5 x 20 12.5 x 25 16 x 25 16 x 31 8 x 12 8 x 12 8 x 15 10 x 12 10 x 16 10 x 20 12.5 x 20 12.5 x 25 16 x 20 16 x 31 16 x 35 18 x 40 8 x 12 10 x 12 10 x 16 10 x 20 12.5 x 20 12.5 x 25 12.5 x 35 16 x 20 16 x 31 16 x 35 18 x 40 8 x 12 8 x 15 10 x 12 10 x 16 10 x 20 12.5 x 20 12.5 x 25 16 x 20 12.5 x 35 16 x 20 16 x 31 18 x 31 18 x 40 555 730 950 1460 1950 2390 2890 555 555 730 730 950 1180 1460 1950 1840 2890 3100 3500 555 730 950 1180 1460 1950 2510 1840 2890 3100 3500 555 730 730 950 1180 1460 1950 1840 2510 1840 2890 3000 3300 47 71 103 223 333 473 683 35 53 78 78 112 163 243 355 531 755 1091 1315 55 86 121 173 253 378 553 553 828 1178 1703 35 77 80 118 167 241 353 353 528 528 773 1155 1648 0.19 0.19 0.19 0.21 0.21 0.23 0.25 0.16 0.16 0.16 0.16 0.16 0.16 0.16 0.18 0.20 0.22 0.24 0.28 0.14 0.14 0.14 0.14 0.14 0.14 0.16 0.16 0.16 0.18 0.22 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.14 0.16 0.18 0.117 0.097 0.066 0.037 0.029 0.022 0.019 0.117 0.117 0.085 0.097 0.066 0.049 0.037 0.029 0.028 0.019 0.018 0.018 0.117 0.097 0.066 0.049 0.037 0.029 0.028 0.028 0.019 0.018 0.018 0.117 0.085 0.097 0.066 0.049 0.037 0.029 0.028 0.028 0.028 0.019 0.019 0.018 0.870 0.680 0.460 0.260 0.200 0.150 0.130 0.870 0.870 0.750 0.680 0.460 0.340 0.260 0.200 0.200 0.130 0.130 0.130 0.870 0.680 0.460 0.340 0.260 0.200 0.200 0.200 0.130 0.130 0.130 0.870 0.750 0.680 0.460 0.340 0.260 0.200 0.200 0.200 0.200 0.130 0.130 0.130 Revision: 26-Apr-16 ORDERING CODE MAL2150....... BULK PACKAGING TAPED FORM CA FORM CB FORM TFA 54471E3 84471E3 34471E3 54681E3 64681E3 34681E3 54102E3 64102E3 34102E3 54222E3 64222E3 34222E3 54332E3 64332E3 34332E3 54472E3 64472E3 34472E3 54682E3 64682E3 34682E3 55221E3 85221E3 35221E3 55331E3 85331E3 35331E3 95475E3 95478E3 95473E3 55471E3 65471E3 35471E3 55681E3 65681E3 35681E3 55102E3 65102E3 35102E3 55152E3 65152E3 35152E3 55222E3 65222E3 35222E3 55332E3 65332E3 35332E3 55472E3 65472E3 35472E3 55682E3 65682E3 55822E3 65822E3 56221E3 86221E3 36221E3 56331E3 66331E3 36331E3 56471E3 66471E3 36471E3 56681E3 66681E3 36681E3 56102E3 66102E3 36102E3 56152E3 66152E3 36152E3 96225E3 96226E3 56222E3 66222E3 36222E3 56332E3 66332E3 36332E3 56472E3 66472E3 56682E3 66682E3 50101E3 80101E3 30101E3 90225E3 90228E3 90223E3 50221E3 60221E3 30221E3 50331E3 60331E3 30331E3 50471E3 60471E3 30471E3 50681E3 60681E3 30681E3 50102E3 60102E3 30102E3 90105E3 90106E3 90103E3 90186E3 90187E3 50152E3 60152E3 30152E3 50222E3 60222E3 30222E3 50332E3 60332E3 50472E3 60472E3 - Document Number: 28323 3 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 150 RMI www.vishay.com Vishay BCcomponents ELECTRICAL DATA AND ORDERING INFORMATION UR (V) 50 63 100 CR 100 Hz (μF) NOMINAL CASE SIZE ØDxL (mm) IR 100 kHz 105 °C (mA) IL2 2 min (μA) tan 100 Hz Z 100 kHz +20 °C () Z 100 kHz -40 °C () 150 220 330 470 680 1000 1200 1500 3300 47 100 150 220 330 470 470 680 680 1000 2200 22 330 10 x 12 10 x 16 10 x 20 12.5 x 20 12.5 x 25 16 x 25 16 x 31 16 x 31 18 x 40 8 x 12 10 x 12 10 x 16 10 x 20 12.5 x 20 12.5 x 25 16 x 20 16 x 20 16 x 25 16 x 31 18 x 40 8 x 12 18 x 20 500 700 900 1100 1400 1800 2200 2200 3200 405 420 560 700 930 1200 1100 1100 1500 1900 3100 230 1700 78 113 168 238 343 503 603 753 1653 30 66 97 141 211 299 299 431 431 633 1389 22 330 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.14 0.09 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.12 0.08 0.07 0.200 0.120 0.090 0.062 0.048 0.034 0.027 0.027 0.024 0.342 0.270 0.190 0.150 0.095 0.067 0.074 0.074 0.054 0.042 0.033 0.68 0.074 1.400 0.840 0.630 0.430 0.340 0.240 0.190 0.190 0.168 2.350 1.890 1.330 1.050 0.670 0.470 0.520 0.520 0.380 0.295 0.231 27.0 2.0 ORDERING CODE MAL2150....... BULK PACKAGING TAPED FORM CA FORM CB FORM TFA 51151E3 61151E3 31151E3 51221E3 61221E3 31221E3 51331E3 61331E3 31331E3 51471E3 61471E3 31471E3 51681E3 61681E3 31681E3 51102E3 61102E3 31102E3 51122E3 61122E3 31122E3 51152E3 61152E3 31152E3 51332E3 61332E3 58479E3 88479E3 38479E3 58101E3 68101E3 38101E3 58151E3 68151E3 38151E3 58221E3 68221E3 38221E3 58331E3 68331E3 38331E3 58471E3 68471E3 38471E3 98475E3 98476E3 98473E3 58681E3 68681E3 38681E3 98685E3 98686E3 98683E3 58102E3 68102E3 38102E3 58222E3 68222E3 59229E3 89229E3 39229E3 90183E3 90185E3 - ADDITIONAL ELECTRICAL DATA PARAMETER Voltage Surge voltage Reverse voltage Current Leakage current Inductance CONDITIONS VALUE Us 1.15 x UR Urev 1 V After 2 min at UR IL2 0.01 CR x UR + 3 μA Case Ø D 10 mm Case Ø D 12.5 mm Typ. 16 nH Typ. 18 nH Calculated from tan max. and CR (see Table 2) ESR = tan /2f CR Equivalent series inductance (ESL) Resistance Equivalent series resistance (ESR) CAPACITANCE (C) 1.2 1.2 C C0 1.0 C C0 1.1 1 0.8 1.0 2 0.6 0.4 0.9 Curve 1: UR ≤ 35 V Curve 2: UR ≥ 50 V 0.2 0.8 - 60 0 - 40 - 20 0 20 40 60 C0 = Typical capacitance at 20 °C, 100 Hz 80 100 120 Tamb (°C) Fig. 5 - Typical multiplier of capacitance as a function of ambient temperature Revision: 26-Apr-16 140 10 10 2 10 3 C0 = Typical capacitance at 20 °C, 100 Hz 10 4 f (Hz) 10 5 Tamb 20 °C Fig. 6 - Typical multiplier of capacitance as a function of frequency Document Number: 28323 4 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 150 RMI www.vishay.com Vishay BCcomponents EQUIVALENT SERIES RESISTANCE (ESR) 6 ESR ESR 0 5 ESR ESR 0 10 Curve 1: Ø D ≤ 12.5 mm Curve 2: Ø D ≥ 16 mm 1 4 3 2 2 1 1 0 - 60 - 40 - 20 0 20 40 60 80 100 120 140 10 2 10 Tamb (°C) ESR0 = Typical ESR at 20 °C, 100 Hz 10 3 10 4 ESR0 = Typical ESR at 20 °C, 100 Hz Fig. 7 - Typical multiplier of ESR as a function of ambient temperature f (Hz) 10 5 Tamb = 20 °C Fig. 8 - Typical multiplier of ESR as a function of frequency IMPEDANCE (Z) 102 103 Z (Ω) Z Z0 Curve 1: 100 µF, 63 V Curve 2: 220 µF, 50 V Curve 3: 680 µF, 63 V 102 10 1 2 1 3 10 1 10-1 10-1 - 60 - 40 - 20 0 20 40 60 80 Z0 = Typical impedance at 20 °C, 100 kHz 100 120 10-2 10 140 10 2 10 3 10 4 f (Hz) 10 5 Tamb = 20 °C Tamb (°C) Fig. 9 - Typical multiplier of impedance as a function of ambient temperature Fig. 10 - Typical impedance as a function of frequency 102 Curve 1: 330 µF, 35 V Curve 2: 470 µF, 16 V Curve 3: 680 µF, 16 V Curve 4: 1000 µF, 16 V Curve 5: 6800 µF, 16 V Z (Ω) 10 1 1 2 3 4 5 10-1 10-2 10 10 2 10 3 10 4 f (Hz) 10 5 Tamb = 20 °C Fig. 11 - Typical impedance as a function of frequency Revision: 26-Apr-16 Document Number: 28323 5 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 150 RMI www.vishay.com Vishay BCcomponents RIPPLE CURRENT AND USEFUL LIFE Table 3 ENDURANCE TEST DURATION AND USEFUL LIFE AS A FUNCTION OF CASE SIZE NOMINAL CASE SIZE ØDxL (mm) CASE CODE ENDURANCE AT 105 °C (h) USEFUL LIFE AT 105 °C (h) 8 x 12 13 3000 4000 8 x 15 13L 3000 4000 10 x 12 14 3000 4000 10 x 16 15 3000 6000 10 x 20 16 3000 6000 12.5 x 20 17 3000 7000 12.5 x 25 18 5000 8000 12.5 x 35 18LL 5000 8000 16 x 20 19a 3000 7000 16 x 25 19 5000 10 000 16 x 31 20 5000 10 000 16 x 35 21 5000 10 000 18 x 20 1820 3000 7000 18 x 31 1831 6000 10 000 18 x 40 1840 8000 10 000 CCC206 3.8 3.7 IA IR 3.6 3.5 3.4 3.3 3.2 3.1 3.0 2.8 Lifetime multiplier 2.6 1.0 2.4 1.5 2.0 2.2 3.0 4.0 2.0 6.0 8.0 2 1 1.8 1.6 20 30 1.4 1.2 1.0 0.8 0.5 0.0 60 0 10 0 15 0 20 IA = Actual ripple current at 100 kHz IR = Rated ripple current at 100 kHz, 105 °C (1) Useful life at 105 °C and I applied; see Table 4 R 40 50 (1) 60 70 80 90 100 110 Tamb (°C) Fig. 12 - Multiplier of useful life as a function of ambient temperature and ripple current load Revision: 26-Apr-16 Document Number: 28323 6 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 150 RMI www.vishay.com Vishay BCcomponents Table 4 MULTIPLIER OF RIPPLE CURRENT (IR) AS A FUNCTION OF FREQUENCY IR MULTIPLIER FREQUENCY (Hz) Ø = 8 mm TO 12.5 mm Ø = 16 mm AND 18 mm 100 0.65 0.76 300 0.76 0.85 1000 0.85 0.91 3000 0.89 0.94 10 000 0.90 0.96 30 000 0.97 0.98 100 000 1.00 1.00 Table 5 TEST PROCEDURES AND REQUIREMENTS TEST NAME OF TEST Endurance REFERENCE IEC 60384-4 / EN130300 subclause 4.13 PROCEDURE (quick reference) REQUIREMENTS Tamb = 105 °C; UR applied; for test duration see Table 3 C/C: ± 20 % tan 2 x spec. limit IL2 spec. limit Useful life CECC 30301 subclause 1.8.1 Tamb = 105 °C; UR and IR applied; for test duration see Table 3 C/C: ± 30 % tan 3 x spec. limit IL2 spec. limit no short or open circuit total failure percentage: 1 % Shelf life (storage at high temperature) IEC 60384-4 / EN130300 subclause 4.17 Tamb = 105 °C; no voltage applied; 1000 h after test: UR to be applied for 30 min., 24 h to 48 h before measurement C/C: ± 20 % tan 2 x spec. limit IL2 spec. limit Revision: 26-Apr-16 Document Number: 28323 7 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000