2 1 THIS COPY IS PROVIDED ON A RESTRICTED BASIS AND IS NOT TO BE USED IN ANY WAY DETRIMENTAL TO THE INTERESTS OF PANDUIT CORP. NOTE: 1. MILLIMETERS ARE IN [ ]. PART NUMBER H100X044HFT-2 H200X044HFT-2 H100X044HGT-2 H200X044HGT-2 2 SEE DETAIL MATERIAL B A B A GMUF "B" INSIDE MIN ID MAX. "A" +/-.062 +/-.062 NOMINAL DIA. SUPPLIED RECOVERED 1.00 [25.4] 2.00 [50.8] 3.50 1/4 in. 0.25 0.13 1.00 [25.4] [88.9] [6.3 mm] [6.4] [3.3] 2.00 [50.8] MARKER ACROSS 2 1 2 1 TUBING COLOR PKG. QTY. SEE STYLE 1000 500 1000 YELLOW 500 WHITE A DETAIL A "B" "A" TYP. TUBING LENGTH B DETAIL B .75 19.05 HEAT SHRINK TUBING B STYLE A "A" TYP. BUTT-CUT PERFORATION, TYP .062 TYP. 11.2 ]. "B" .75 19.05 .44 NOTES: 1. MILLIMETER ARE IN [ .875 1.6 22.2 .062 FOLD PERFORATION, TYP. 1.3 TYP. REPEAT TEAR PERFORATION, TYP. CLEAR CARRIER CLEAR POLYESTER TAPE TITLE H***X044H*T-2 A A TWO-SIDED HEAT SHRINK LABEL, HALOGEN FREE CUSTOMER DRAWING ITEM REVISION NAME I00472XL/02 DATASET FILE NAME I00472XL-DC-C10928/02C D10100DA/12 MATERIAL: H200X044HFT-2-B, H100X044HGT-2-B, AND H200X044HGT-2-B. REMOVE H100X044HFT-2-B, 2 2/4/13 RVU DAPE 1 8/23/11 RVU DAPE Change marker height tolerance from .032" to .062" to match other HST drawings tolerances. Update on view. REMOVE STYLE B. 6481 0 6/2/11 RVU DAPE DRAWING RELEASE. 6412 SEWH GAECN00574 UNLESS OTHERWISE SPECIFIED, DIMENSIONAL TOLERANCES ARE: IN [mm] .X .XX .12 [3.05] .062 [1.57] .XXX HEAT SHRINK TUBING, GMUHF21 .015 [.381] ANGLES DRAWING NUMBER: THIRD ANGLE PROJECTION DRAWN BY REV DATE BY CHK APR DESCRIPTION 2 ECN RVU DATE CHK 6/2/11 C10928 SIZE SCALE NTS MSAD 1 SHT 1 OF 1 A