NetKey All Molded Punchdown Patch Panels NETKEY Part Numbers: NK5EPP24P, NK5EPPN24P, NK5EPP48P, NK5EPPN48P, NK6PP24P, NK6PPN24P, NK6PP48P, NK6PPN48P, NK6XPP24P, NK6XPPN24P, NK6XPP48P, NK6XPPN48P NETWORK COMPONENTS CONTRACTOR GRADE INSTALLATION INSTRUCTIONS © Panduit Corp. 2015 NK548A Back 24-Port Front 48-Port 2 1 T568B T568A CWST 1.5" (38.1mm) Trim pair separator and/or filler if present. 3 Option 1 (T568B shown) Option 2 4 (T568B shown) PDT110 Tool T568 BA BA T568 BA BA Do not untwist more then 1/8" from the IDC tower 5 6 T568 BA BA T568 BA BA (T568B shown) For Technical Support: www.panduit.com/resources/install_maintain.asp Page 1 of 2 (T568B shown) INSTALLATION INSTRUCTIONS © Panduit Corp. 2015 NK548A 8 7 RECOMMENDED CABLE ROUTING Cable Management Recommended cable routing for straight panel terminated ports. Jack Module Removal Jack Module Installation Depress latch on module 2 3 1 4 Notes: 1. NetKey All Molded Patch Panels can terminate most 22-26 AWG solid or stranded wire with a 0.050" (1.27mm) max. o.d., either PVC or plenum rated. 2. Never install wire into a slot previously used for a larger gauge wire. 3. Never install communications wiring during a lightning storm. 4. Never install communications wiring in wet locations unless the module is specifically designed for use in wet locations. 5. Never touch uninsulated communications wiring or terminals unless the communication line has been disconnected at the network interface. 6. Use caution when installing or modifying communication wiring. COLOR-CODED WIRE POSITIONS Pin T568B outs WHITE/BLUE T1 5 BLUE R1 4 WHITE/GREEN T3 3 GREEN R3 6 1 WHITE/ORANGE T2 ORANGE R2 2 WHITE/BROWN T4 7 BROWN R4 8 1 8 Pin T568A outs WHITE/BLUE T1 5 R1 4 BLUE WHITE/GREEN T2 1 GREEN R2 2 WHITE/ORANGE T3 3 ORANGE R3 6 WHITE/BROWN T4 7 BROWN R4 8 E-mail: [email protected] For Instructions in Local Languages and Technical Support: www.panduit.com/resources/install_maintain.asp Pin outs www.panduit.com Page 2 of 2 Phone: 866-405-6654