MB91570 series 32bit Microcontorller Datasheet Supplementary Information Note: This sheet shows a change trace of description in datasheet. All the changes between previous and current document edition are described in this sheet. Following "ID" is a number which is owned by every change. A change which is applied to other documents of same family should have a same ID. Summary Error Error Page Original document code: DS705-00009-3v0-E, Previous document code: DS705-00009-2v2-E Rev. 1.0 June 19, 2015 I/O circuit type 26-27 139-143:H 26-27 139-143:H/I4*1 #92 +B port definition 102 *8: -Corresponding pins: all general-purpose ports. (For MB91F575/7, except P010 to P017, P020 to P027, P030 to P037, P040 to P047, P050 to P053, P90/ADTG/PPG0_2) 102 *8: -Corresponding pins: all general-purpose ports except P010 to P017, P020 to P027, P030 to P037, P040 to P047, P050 to P053, P90/ADTG/PPG0_2 #87 Update the power supply current for Icc5 (MAX) 109 Icc5:At normal operation Operating frequency FCP=80MHz,Fcpp=40MHz:-(Min), 60(Typ), 115(Max):mA:*5 Icc5:FLASH write Operating frequency FCP=80MHz, Fcpp=40MHz:-(Min), 75(Typ), 130(Max):mA:*3, *4 Icc5:FLASH erase Operating frequency FCP=80MHz,Fcpp=40MHz:-(Min), 75(Typ), 130(Max):mA:*5 109 Icc5:At normal operation Operating frequency FCP=80MHz,Fcpp=40MHz:-(Min), 60(Typ), #388 125(Max):mA:*5 Icc5:FLASH write Operating frequency FCP=80MHz, Fcpp=40MHz:-(Min), 75(Typ), 140(Max):mA:*3, *4 Icc5:FLASH erase Operating frequency FCP=80MHz,Fcpp=40MHz:-(Min), 75(Typ), 140(Max):mA:*3, *5 Annotation for power supply current table 110 *5: MB91F578/9 have been designed to fulfill those target values 110 shown in the table, and engineering samples of the product are under evaluation. *5: MB91F578/9 #394 I2C timing 126 Hish Speed Mode*3 0.9*3 250 Hish Speed Mode 0.9 250*3 #40 Publication Number MB91F577_DS705-00009-3v0-E-SI Correct Page 126 Correct Revision 1 Issue Date June 19, 2015 ID