0.1MB

The following document contains information on Cypress products.
FUJITSU MICROELECTRONICS
SUPPORT SYSTEM
SS01-71114-1E
DSU-FR EMULATOR
DSU-FR CABLE
SMALL CABLE For DSU3
MB2198-201-E
OPERATION MANUAL
PREFACE
Thank you for purchasing the DSU-FR* cable small cable for DSU3 (MB2198-201-E, referred to as
"small cable") for the DSU-FR emulator.
The DSU-FR cable small cable for DSU3 is used to connect the DSU-FR emulator (MB2198-01-E,
referred to as "emulator") and the DSU-FR cable (MB2198-10-E) to a user system. That uses FUJITSU MICROELECTRONICS FR family microcontroller (DSU3 Interface loading) to a user system.
This manual explains the handling of the DSU-FR cable small cable for DSU3 for the DSU-FR emulator.
Before using the MB2198-201-E, be sure to read this manual.
Please contact the sales or support representative for details on the mass production and evaluation
MCU models that can be used with this product.
* : FR, the abbreviation of FUJITSU RISC controller, is a line of products of FUJITSU MICROELECTRONICS Limited.
■ Handling and use
The handling and use of this product and notes regarding safety are included in the operation manual
of the DSU-FR emulator and DSU-FR cable operation manual.
Follow the instructions in "DSU-FR EMULATOR MB2198-01-E OPERATION MANUAL" and
"DSU-FR EMULATOR DSU-FR CABLE MB2198-10-E OPERATION MANUAL" for the use of
this product.
■ European RoHS compliance
Products with a -E suffix on the part number are European RoHS compliant products.
■ Notice on this document
All information included in this document is current as of the date it is issued. Such information is
subject to change without any prior notice.
Please confirm the latest relevant information with the sales representatives.
■ Caution of the products described in this document
The following precautions apply to the product described in this manual.
CAUTION
Cuts
Damage
Indicates a feature that, if not used correctly, may result in minor or moderate injuries,
and which may cause the customer system to malfunction.
This product has parts with sharp points that are exposed.
Do not touch edge of the product with your bare hands.
Please unite correctly the camfering portion of an emulator interface connector, and
the camfering portion of a user system connector.If it mistakes, there is a possibility
of becoming the cause of failure of an emulator system and a user system.
i
• The contents of this document are subject to change without notice.
Customers are advised to consult with sales representatives before ordering.
• The information, such as descriptions of function and application circuit examples, in this document are presented solely for the purpose of reference to show examples of operations and uses of FUJITSU MICROELECTRONICS semiconductor device; FUJITSU MICROELECTRONICS does not warrant proper operation of the device with respect to
use based on such information. When you develop equipment incorporating the device based on such information, you
must assume any responsibility arising out of such use of the information. FUJITSU MICROELECTRONICS assumes
no liability for any damages whatsoever arising out of the use of the information.
• Any information in this document, including descriptions of function and schematic diagrams, shall not be construed
as license of the use or exercise of any intellectual property right, such as patent right or copyright, or any other right
of FUJITSU MICROELECTRONICS or any third party or does FUJITSU MICROELECTRONICS warrant non-infringement of any third-party's intellectual property right or other right by using such information. FUJITSU MICROELECTRONICS assumes no liability for any infringement of the intellectual property rights or other rights of third
parties which would result from the use of information contained herein.
• The products described in this document are designed, developed and manufactured as contemplated for general use,
including without limitation, ordinary industrial use, general office use, personal use, and household use, but are not
designed, developed and manufactured as contemplated (1) for use accompanying fatal risks or dangers that, unless
extremely high safety is secured, could have a serious effect to the public, and could lead directly to death, personal
injury, severe physical damage or other loss (i.e., nuclear reaction control in nuclear facility, aircraft flight control, air
traffic control, mass transport control, medical life support system, missile launch control in weapon system), or (2)
for use requiring extremely high reliability (i.e., submersible repeater and artificial satellite).
Please note that FUJITSU MICROELECTRONICS will not be liable against you and/or any third party for any claims
or damages arising in connection with above-mentioned uses of the products.
• Any semiconductor devices have an inherent chance of failure. You must protect against injury, damage or loss from
such failures by incorporating safety design measures into your facility and equipment such as redundancy, fire protection, and prevention of over-current levels and other abnormal operating conditions.
• Exportation/release of any products described in this document may require necessary procedures in accordance with
the regulations of the Foreign Exchange and Foreign Trade Control Law of Japan and/or US export control laws.
• The company names and brand names herein are the trademarks or registered trademarks of their respective owners.
Copyright ©2008 FUJITSU MICROELECTRONICS LIMITED All rights reserved
ii
1. Checking the Delivered Product
Before using the DSU-FR cable small cable for DSU3, confirm that the following components are
included in the box:
•
•
•
•
Small cable*1
Emulator interface connector*2
Operation manual (Japanese version)
Operation manual (English version, this manual)
:1
:1
:1
:1
*1 : Small cable is mounted on user system connector (Type: SICA2P20S (Tokyo Eletech Corporation).
*2 : It is the connector (Type:SICA2P20HD (Tokyo Eletech Corporation) mounted on a user system.
This connector can be purchased separately (Type: SICA2P20HD05 (Tokyo Eletech Corporation, Five-piece on)).
This product is used by combining with an optional "DSU-FR EMULATOR (MB2198-01-E)" (sold
separately) and DSU-FR CABLE (Type: MB2198-10-E).
Please contact the sales or support representative for details on the evaluation MCU that can be used
with this product.
2. Handling Precautions
The Small cable is precision-manufactured to improve dimensional accuracy and to ensure reliable
contact. The header is therefore sensitive to mechanical shock. To ensure correct use of the header
in the proper environment, observe the following points regarding its insertion and removal:
• To avoid placing stress on the Emulator interface connector mounted on the user system board
during connecting the small cable.
1
3. Notes on Designing
■ Restrictions of PC board for the user system
Once the small cable is connected to the user system, the heights of parts mounted in the space
around the small cable are restricted.
The PC board of the user system must be designed with due consideration given to this restriction.
73.0 mm
45.0 mm
0.5 mm
9.0 mm
31.0 mm
2.7 mm
( TOP VIEW )
Approx.
6 mm*
70.0 mm*
DSU-FR CABLE
USER SYSTEM
( SIDE VIEW )
* : The height differs slightly depending on how the connector are engaged.
Figure 1 Small cable dimensions
2
■ EMULATOR INTERFACE CONNECTOR footprint design notes
Figure 2 shows the recommended dimensions of the Emulator interface connector footprint mounted
on the PC board of the user system.
The PC board of the user system must be designed with due consideration given to this footprint.
For more information, contact the Tokyo Eletech Corporation.
5.75 mm
6.0 mm
1.4 mm
2.0 mm
4.5 mm
0.5 mm
0.25 mm
+ 0.1
φ 0.8 0 mm
Positioning hole*
+ 0.1
φ 0.8 0 mm
7.1 mm
Positioning hole*
* : The positioning hole (two places) of a connector is prepared on a PC board.
Figure 2 Recommended dimensions of the footprint for mounting the emulator interface connector
3
4. Procedure for Connecting the DSU-FR CABLE
■ Connection
Please remove the cable (FPC cable or flat cable) connected to the DSU-FR cable before using this
product.
The case where a small cable is connected, please pull out a movable piece (white portion) with the
FPC cable connector bottom, and push in a plug and a movable piece for a small cable.
FPC CABLE CONNECTOR
MOVABLE PIECE
SMALL CABLE
Figure 3 Connecting small cable and DSU-FR cable
■ Disconnection
The case where a small cable is removed, please pull out a movable piece (white portion) with the
FPC cable connector bottom, and push in removal and a movable piece for a small cable.
4
5. Procedure for Connecting the User System
■ Connection
Before using the DSU cable small cable for DSU3,this product is appended mount the supplied Emulation interface connector on the user system.
To connect the small cable to the user system, match the position of the Camfering portion of an emulator interface connector mounted on the user system with the position of the Camfering portion of
the user system connector mounted in the small cable is united and then insert it perpendicularly (see
Figure 4).
CAMFERING
PORTION
USER SYSTEM CONNECTOR
EMULATOR INTERFACE CONNECTOR
USER SYSTEM
Figure 4 Connecting small cable and user system
■ Disconnection
To remove the small cable, please draw out a user system connector perpendicularly from an emulator interface connector for load not to join the emulator interface connector mounted on the user
system.
5
6. User System Connector Pin Assignment
■ Pin assignment
Table 1 User system connector pin assignment
PIN No.
20
18
17
16
14
13
12
11
10
7
Input /
PIN name
Function
output
ICLK
Input
ICS[0]
Input
ICS[1]
Input
ICS[2]
Input
Input and
ICD[0]
output
Input and Emulator control
ICD[1]
output
Input and
ICD[2]
output
Input and
ICD[3]
output
BREAK
Output
INITX
Output
6
xRSTIN
Input
4
UVcc*
Input
9,15,19
1,2,3,5,8
GND
N.C.
-
Description
• Connects with the same name of Evaluation MCU.
• Maximum wiring length is 50 mm.
• Connects with the reset pin of Evaluation MCU.
• Separate wiring between evaluation MCU reset pinsfrom the reset output circuit on a user system at theEvaluation MCU reset
time of emulator use.
• Effective with the "L" output.
• Open drain output.10 kΩ pull-up resistance built-in
using the UVCC pin.(VOL = +0.4 V max, IOL = 12 mA)
User system reset
• Connects with the reset output circuit of a user system.
• Effective in the "L" input.
(VIH = +1.7 V min, IIH = −10 µA)
(VIL = +0.8 V max, IIL = 10 µA)
User system power
supply
GND
-
Connects with the external I/O power supply of
Evaluation MCU.(0 V to +5.5 V / 100 mA less)
Connects with the VSS pin (0 V) of Evaluation MCU.
Since it is intact, it opens.
*:When Evaluation MCU is a single power supply, please connect with a VCC pin, and in the case of two or more power
supplies, connect with an external I/O power supply.
CAMFERING
PORTION
1PIN
19 PIN
2 PIN
20 PIN
Figure 5 User system connector form
6
CAMFERING
PORTION
SS01-71114-1E
FUJITSU MICROELECTRONICS • SUPPORT SYSTEM
DSU-FR EMULATOR
DSU-FR CABLE SMALL CABLE For DSU3
MB2198-201-E
OPERATION MANUAL
June 2008 the first edition
Published FUJITSU MICROELECTRONICS LIMITED
Edited
Business & Media Promotion Dept.
Similar pages