Datasheet

UNISONIC TECHNOLOGIES CO., LTD
U74HCT595
CMOS IC
8-BIT SHIFT REGISTERS WITH
LATCHED 3-STATE OUTPUT
REGISTERS
„
DESCRIPTION
The UTC 74HCT595 contains an 8-bit register with asynchronous
reset input and an 8-bit latch with output enable input. Data on the
Serial Data Input (SER) will be shift into the internal shift register
during every LOW-to-HIGH transition on the Shift Clock. The latch will
latch the 8-bit data from the shift register during the LOW-to-HIGH
transition on the Latch Clock. The shift register also provides a serial
output.
„
FEATURES
* Operation Voltage Range:4.5V~5.5V
* High Noise Immunity
* Output Compatibility with CMOS and TTL
* 8-Bit Serial-In,Parallel-Out Shift
* Inputs are TTL voltage compatiable
„
ORDERING INFORMATION
Ordering Number
Lead Free
Halogen Free
U74HCT595L-P16-R
U74HCT595G-P16-R
U74HCT595L-P16-T
U74HCT595G-P16-T
www.unisonic.com.tw
Copyright © 2011 Unisonic Technologies Co., Ltd
Package
Packing
TSSOP-16
TSSOP-16
Tape Reel
Tube
1 of 6
QW-R502-666.A
U74HCT595
PIN CONFIGURATION
QB
1
16 VCC
QC
2
15
QA
QD
3
14
SER
QE
4
13 OE
QF
5
12 RCLK
QG
6
11
QH
7
10 SRCLR
8
„
CMOS IC
9
GND
„
SRCLK
QH’
FUNCTION TABLE
FUNCTION
INPUTS
SRCLK
RCLK
OE
SRCLR
SER
QH’
Qn
X
X
L
L
X
L
NC
X
↑
L
L
X
L
L
X
X
H
L
X
L
Z
↑
X
L
H
H
QG’
NC
X
↑
L
H
X
NC
Qn’
↑
↑
L
H
X
QG’ Qn’
A Low-Level on SRCLR only affects the shift
registers.
Empty shift register loaded into storage register.
Shift register clear. Parallel outputs in
high-impedance OFF-state
Logic high level shifted into the first shift register.
Contents of all shift register stages shifted through,
e.g. previous state of stage G(internal QG’) appears
on the serial output(QH’).
Contents of shift register stages (internal Qn’) are
transferred to the storage register and parallel
output stages.
Contents of shift register shifted through. Previous
contents of the shift register is transferred to the
storage register and the parallel output stages.
Note:H : HIGH voltage level.
L : LOW voltage level.
X : Don’t care.
Z : High impedance OFF-state.
NC: No change.
↑ : Low-to-High transition.
↓ : High-to-Low transition.
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
OUTPUTS
2 of 6
QW-R502-666.A
U74HCT595
„
CMOS IC
LOGIC DIAGRAM
SRCLR
SRCLK
SER
R
D
R
D
R
D
R
D
R
D
R
D
R
D
R
D
SRA
SRB
SRC
SRD
SRE
SRF
SRG
SRH
Q
Q
Q
Q
Q
Q
Q
Q
D
D
D
D
D
D
D
D
LRA
LRB
LRC
LRD
LRE
LRF
LRG
LRH
Q
Q
Q
Q
Q
Q
Q
Q
QA
QB
QC
QD
QE
QF
QG
QH
RCLK
QH’
OE
„
TIMING DIAGRAM
SRCLR
OE
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
3 of 6
QW-R502-666.A
U74HCT595
„
CMOS IC
ABSOLUTE MAXIMUM RATING(unless otherwise specified)
PARAMETER
Supply Voltage
Input Voltage
Output Voltage(active mode)
SYMBOL
RATINGS
UNIT
VCC
-0.5~7.0
V
VIN
-0.5~Vcc+0.5
V
VOUT
-0.5~VCC+0.5
V
Input Clamp Current (ViN<0)
IIK
±20
mA
Output Clamp Current (VOUT<0)
IOK
±20
mA
Output Current
IOUT
±35
mA
VCC or GND Current
ICC
±70
mA
Storage Temperature
TSTG
-65 ~ +150
°C
Notes: 1. Absolute maximum ratings are those values beyond which the device could be permanently damaged.
Absolute maximum ratings are stress ratings only and functional device operation is not implied.
2. The input and output voltage ratings may be exceeded if the input and output current ratings are
observed.
„
RECOMMENDED OPERATING COMDITIONS
PARAMETER
Supply Voltage
Input Voltage
Output Voltage
Operating Temperature
Input Transition Rise or Fall Rate
„
VCC =4.5V
SYMBOL
VCC
VIN
VOUT
TOPR
tR/tF
MIN
4.5
0
0
-40
TYP
5
MAX
5.5
VCC
VCC
85
500
6.0
UNIT
V
V
V
°C
ns
ELECTRICAL CHARACTERISTICS(Ta=25°С, unless otherwise specified)
PARAMETER
High-Level input voltage
Low-Lever output voltage
SYMBOL
TEST CONDITIONS
VIH
VCC=4.5V~5.5V
VIL
VCC=4.5V~5.5V
VCC=4.5V, IOH=-20μA
High-Level Output Voltage,QA-QH
VOH
VCC=4.5V, IOH=-6mA
VCC=4.5V, IOL=20μA
Low-Level Output Voltage,QA-QH
VOL
VCC=4.5V, IOH=6mA
VCC=4.5V, IOH=-20μA
High-Level Output Voltage,QH’
VOH
VCC=4.5V, IOH=-4mA
VCC=4.5V, IOL=20μA
Low-Level Output Voltage,QH’
VOL
VCC=4.5V, IOH=4mA
Input Leakage Current
II(LEAK) VCC=5.5V, VIN=VCC or GND
Output OFF -state current
IOZ
VCC=5.5V, VOUT=VCC or GND
Quiescent Supply Current
ICC
VCC=5.5V, VIN=VCC or GND, IOUT=0
One input at VCC -2.1V,other inputs
△ICC
Additional Quiescent Supply Current
at 0 or VCC
Input Capacitance
CIN
VCC=5.5V, VIN=VCC or GND
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
MIN
2.0
4.4
3.98
4.4
3.98
TYP
1.6
1.2
4.499
4.3
0.001
0.17
4.499
4.3
0.001
0.17
±0.1
±0.01
MAX
0.1
0.26
±100
±0.5
8
UNIT
V
V
V
V
V
V
V
V
V
V
nA
μA
μA
100
450
uA
3
10
pF
0.8
0.1
0.26
4 of 6
QW-R502-666.A
U74HCT595
„
DYNAMIC CHARACTERISTICS(Ta=25°С, CL=50pF,RL=1kΩ,unless otherwise specified)
PARAMETER
Maximum clock pulse frequency
Propagation delay from input
(RCLK) to output(Qn)
Propagation delay from input
(SRCLK) to output(QH’)
3-state output enable time from input
( OE ) to output(Qn)
3-state output disable time from
input ( OE ) to output(Qn)
Propagation delay from input
( SRCLR ) to output(QH’)
Output transition time, QH’
Output transition time, Qn
„
CMOS IC
SYMBOL
f(MAX)
TEST CONDITIONS
VCC=4.5V
MIN
30
TYP MAX UNIT
52
MHz
tPHL/tPLH
VCC=4.5V
24
40
ns
tPLH/tPHL
VCC=4.5V
24
42
ns
tPZH/tPZL
VCC=4.5V
21
35
ns
tPHZ/tPLZ
VCC=4.5V
18
30
ns
tPHL
VCC=4.5V
23
40
ns
tTLH/ tTHL
tTLH/ tTHL
VCC=4.5V
VCC=4.5V
8
8
15
12
ns
ns
OPERATING CHARACTERISTICS
PARAMETER
Power Dissipation Capacitance
SYMBOL
CPD
TEST CONDITIONS
No Load
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
RATINGS
400
UNIT
pF
5 of 6
QW-R502-666.A
U74HCT595
„
CMOS IC
TEST CIRCUIT AND WAVEFORMS
VCC
K1
From Output
CL
RL
K2
(Note)
Note: CL includes probe and jig capacitance.
UTC assumes no responsibility for equipment failures that result from using products at values that
exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or
other parameters) listed in products specifications of any and all UTC products described or contained
herein. UTC products are not designed for use in life support appliances, devices or systems where
malfunction of these products can be reasonably expected to result in personal injury. Reproduction in
whole or in part is prohibited without the prior written consent of the copyright owner. The information
presented in this document does not form part of any quotation or contract, is believed to be accurate
and reliable and may be changed without notice.
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
6 of 6
QW-R502-666.A
Similar pages