Datasheet

UNISONIC TECHNOLOGIES CO., LTD
UTC4013
Preliminary
CMOS IC
DAUL D-TYPE FLIP-FLOP

DESCRIPTION
The UTC4013 is a dual D-type flip-flop which has two
independent circuits and each flip-flop features independent
data, set, reset, and clock inputs and outputs. The input level
applied to DATA input are transferred to Q and Q output by
rising edge of the clock pulse. When SET input is “H”, and
RESET input is “L”, outputs become Q=”H” and Q =”L”. When
SET input is “L” and RESET input is “H”, outputs become
Q=”L” and Q =”H”. When both SET input and RESET input
are at “H”, outputs become Q=”H” and Q =”H”.

FEATURES
* Power supply voltage 3V to 18V
* Maximum Input Current of 1uA at 18V Over Full Package
Temperature
* Maximum quiescent supply current is 4μA

ORDERING INFORMATION
Ordering Number
UTC4013G-S14-R
UTC4013G-P14-R

Package
SOP-14
TSSOP-14
Packing
Tape Reel
Tape Reel
MARKING
SOP-14
TSSOP-14
14 13 12 11 10 9
8
UTC
UTC4013G
1
www.unisonic.com.tw
Copyright © 2015 Unisonic Technologies Co., Ltd
2 3
4
5
6
7
Date Code
Lot Code
1 of 5
QW-R502-543.d
UTC4013


Preliminary
CMOS IC
PIN CONFIGURATION
Q1
1
14 VDD
Q1
2
13 Q2
CK1
3
12 Q2
RESET1
4
11 CK2
DATA1
5
10 RESET2
SET1
6
9
DATA2
VSS
7
8
SET2
FUNCTION TABLE
RESET
SET
L
H
H
L
H
H
L
L
L
L
L
L
Note: - : Don’t care
* : Level Change
INPUTS
DATA
L
H
-

LOGIC DIAGRAM

BLOCK DIAGRAM
CK*
-
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
OUTPUTS
Q n+1
Qn+1
H
L
L
H
H
H
L
H
H
L
No Change
No Change
2 of 5
QW-R502-543.d
UTC4013

Preliminary
CMOS IC
ABSOLUTE MAXIMUM RATING (TA =25°C , unless otherwise specified)
PARAMETER
SYMBOL
RATINGS
UNIT
DC Supply Voltage
VDD
VSS-0.5 to VSS+20
V
Input Voltage
VIN
VSS-0.5 to VDD+0.5
V
Output Voltage
VOUT
VSS-0.5 to VDD+0.5
V
DC Input Current
IIN
±10
mA
Power Dissipation
PD
500
mW
Operation Temperature
TOPR
-40 ~ +85
°C
Storage Temperature
TSTG
-65 ~ +150
°C
Note: Absolute maximum ratings are those values beyond which the device could be permanently damaged.
Absolute maximum ratings are stress ratings only and functional device operation is not implied.

RECOMMENDED OPERATING CONDITIONS (VSS=0, TA=25°C)
PARAMETER
DC Supply Voltage
Input Voltage

SYMBOL
VDD
VIN
RATINGS
3 ~ 18
0 ~ VDD
UNIT
V
V
D.C. CHARACTERISTICS (VSS=0, TA=25°C)
PARAMETER
SYMBOL
High
VIH
Input Voltage
Low
VIL
High
VOH
Output Voltage
Input Current
Low
VOL
High
Low
IIH
IIL
High
IOH
Output Current
Low
Quiescent Supply Current
IOL
IDD
TEST CONDITIONS
VOUT=0.5V, 4.5V;VDD=5V,∣IOUT∣<1μA
VOUT=1.0V, 9.0V; VDD=10V, ∣IOUT∣<1μA
VOUT=1.5V, 13.5V; VDD=15V, ∣IOUT∣<1μA
VOUT=0.5V, 4.5V; VDD=5V,∣IOUT∣<1μA
VOUT=1.0V, 9.0V; VDD=10V, ∣IOUT∣<1μA
VOUT=1.5V, 13.5V; VDD=15V, ∣IOUT∣<1μA
VIN=VSS, VDD; ∣IOUT∣<1μA; VDD=5V
VIN=VSS, VDD; ∣IOUT∣<1μA; VDD=10V
VIN=VSS, VDD; ∣IOUT∣<1μA; VDD=15V
VIN=VSS, VDD; ∣IOUT∣<1μA; VDD=5V
VIN=VSS, VDD; ∣IOUT∣<1μA; VDD=10V
VIN=VSS, VDD; ∣IOUT∣<1μA; VDD=15V
VIH=18V, VDD=18V
VIL=0V, VDD=18V
VOH=4.6, VIN=VSS, VDD; VDD=5V
VOH=2.5, VIN=VSS, VDD; VDD=5V
VOH=9.5, VIN=VSS, VDD; VDD=10V
VOH=13.5, VIN=VSS, VDD; VDD=15V
VOL=0.4, VIN=VSS, VDD; VDD=5V
VOL=0.5, VIN=VSS, VDD; VDD=10V
VOL=1.5, VIN=VSS, VDD; VDD=15V
VIN=VSS, VDD(Note); VDD=5V
VIN=VSS, VDD(Note); VDD=10V
VIN=VSS, VDD(Note); VDD=15V
MIN
3.5
7.0
11.0
4.95
9.95
14.95
-0.51
-2.10
-1.30
-3.40
0.51
1.30
3.40
TYP
2.75
5.5
8.25
2.25
4.50
6.75
5.00
10.00
15.00
0.00
0.00
0.00
10-5
-10-5
-1.0
-4.0
-2.2
-9.0
1.2
3.2
12.0
0.002
0.004
0.008
MAX
1.5
3.0
4.0
0.05
0.05
0.05
0.1
-0.1
UNIT
V
V
uA
mA
1
2
4
uA
Note: All valid input combinations.
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
3 of 5
QW-R502-543.d
UTC4013

Preliminary
CMOS IC
A.C. CHARACTERISTICS (VSS=0, TA=25°C, CL=50pF)
PARAMETER
SYMBOL
Low to High
tTLH
High to Low
tTHL
Output Transition Time
Propagation Delay Time
tpLH
(CK – Q, Q )
tpHL
tpLH
Propagation Delay Time
(SET, RESET – Q, Q )
tpHL
Max. Clock Frequency
fCL
Max. Clock Input Rise Time
trCL
Max. Clock Input Fall Time
tfCL
Min. Pulse Width (SET, RESET)
tW
Min. Clock Pulse Width
tW
Min. Set-up Time (DATA - CK)
tsu
Min. Hold Time (DATA-CK)
Min. Removal Time
(SET, RESET-CK)
Input Capacitance
tH
trem
CIN
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
TEST CONDITIONS
VDD=5V
VDD=10V
VDD=15V
VDD=5V
VDD=10V
VDD=15V
VDD=5V
VDD=10V
VDD=15V
VDD=5V
VDD=10V
VDD=15V
VDD=5V
VDD=10V
VDD=15V
VDD=5V
VDD=10V
VDD=15V
VDD=5V
VDD=10V
VDD=15V
VDD=5V
VDD=10V
VDD=15V
VDD=5V
VDD=10V
VDD=15V
VDD=5V
VDD=10V
VDD=15V
VDD=5V
VDD=10V
VDD=15V
VDD=5V
VDD=10V
VDD=15V
VDD=5V
VDD=10V
VDD=15V
MIN
3.5
8.0
12.0
TYP
70
35
30
70
35
30
130
65
50
110
50
40
110
50
40
8.0
16.0
20.0
MAX
200
100
80
200
100
80
300
130
90
300
130
90
300
130
90
UNIT
ns
MHz
No Limit
μs
No Limit
μs
60
30
25
60
30
25
20
10
6
5
180
80
50
140
60
40
40
20
15
40
20
15
40
20
15
7.5
ns
ns
pF
4 of 5
QW-R502-543.d
UTC4013

Preliminary
CMOS IC
PARAMETER MEASUREMENT INFORMATION
2. SET-RESET, Q
20ns
20ns
SET
10%
90%
50%
90%
50%
tW
RESET
10%
20ns
20ns
10%
90%
50%
90%
50%
10%
tW
50%
Q
tPLH
50%
tPHL
UTC assumes no responsibility for equipment failures that result from using products at values that
exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or
other parameters) listed in products specifications of any and all UTC products described or contained
herein. UTC products are not designed for use in life support appliances, devices or systems where
malfunction of these products can be reasonably expected to result in personal injury. Reproduction in
whole or in part is prohibited without the prior written consent of the copyright owner. The information
presented in this document does not form part of any quotation or contract, is believed to be accurate
and reliable and may be changed without notice.
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
5 of 5
QW-R502-543.d
Similar pages